HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual

When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘AUTO
LIGHT SENSITIVITY’’ and repeat
the procedure again. To exit this mode without changing
the settings, select ‘‘EXIT’’ by
pressing the INFO button, then
press the SEL/RESET button. The
display goes back to the customize
item screen.Multi-Inf ormation Display118
10/07/17 09:49:50 31TK8600_123
2011 Odyssey

ÛÝ
Here are the seven custom settings
f or the door setup:
While ‘‘DOOR SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEY AND REMOTE UNLOCK
MODE
PSD (POWER SLIDING DOORS)
KEYLESS OPEN MODE
PTG (POWER TAILGATE)
KEYLESS OPEN MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK TIMER
CONT INUED
Door Setup
Multi-Inf ormation Display
Instruments and Controls
119
: Press the INFO ( / ) button.
: Press the SEL/RESET button.
U.S. models only
10/07/17 09:50:00 31TK8600_124
2011 Odyssey

ÛÝÛÝ
Û
Ý
ÛÝ
µ µ
µ You can choose this item to
customize f rom ‘‘DOOR SETUP’’ by
pressing the INFO ( / ) button
repeatedly.
Press the SEL/RESET button to
enter the selecting mode.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button, until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
There are three settings you can
choose f rom:
OFF
The auto door lock mode is
deactivated all the time.
WITH VEH SPD
The doors lock when the vehicle
speed reaches about 10 mph (about
15 km/h).
SHIFT FROM P
The doors lock whenever you move
the shift lever out of Park.
Multi-Inf ormation DisplayA ut o Door L ock120
10/07/17 09:50:08 31TK8600_125
2011 Odyssey

If you f ail to enter your selection,
you will see the above display f or
several seconds, and the display goes
back to ‘‘CUSTOMIZE MENU.’’
Repeat the setup.To exit ‘‘AUTO DOOR LOCK,’’
press the INFO button until you see
‘‘EXIT,’’ then press the SEL/RESET
button.
When your selection is entered, you
will see the above display for several
seconds, and then the display goes
back to ‘‘CUSTOMIZE MENU.’’
CONT INUED
Multi-Inf ormation Display
Instruments and Controls
121
10/07/17 09:50:14 31TK8600_126
2011 Odyssey

ÛÝ
µ
ÛÝ
µ
µ µ
µ You can choose this item to
customize f rom ‘‘DOOR SETUP’’ by
pressing the INFO ( / ) button
repeatedly.
There are f ive possible settings:
OFF The auto door unlock is
deactivated all the time.
Press the SEL/RESET button to
enter the selecting mode.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
DRIVER DOOR With SHIFT to P
The driver’s door unlocks when you
move the shift lever to Park with the
brake pedal depressed.
ALL DOORS With SHIFT to P All
the doors unlock when you move the
shift lever to Park with the brake
pedal depressed.
DRIVER DOOR With IGN OFF
The driver’s door unlocks when you
turn the ignition switch to the LOCK
(0) position.
ALL DOORS With IGN OFF All
the doors unlock when you turn the
ignition switch to the LOCK (0)
position.
A ut o Door UnlockMulti-Inf ormation Display122
10/07/17 09:50:23 31TK8600_127
2011 Odyssey

CONT INUED
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘AUTO
DOOR UNLOCK’’ and repeat the
procedure again. To exit this mode without changing
the settings, select ‘‘EXIT’’ by
pressing the INFO button, then
press the SEL/RESET button. The
display goes back to the customize
item screen.
Multi-Inf ormation Display
Instruments and Controls
123
10/07/17 09:50:29 31TK8600_128
2011 Odyssey

ÛÝÛÝ
You can choose this item to
customize f rom ‘‘DOOR SETUP’’ by
pressing the INFO ( / ) button
repeatedly.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
To select whether the driver’s door
unlocks or all the doors and the
tailgate unlock when you push the
UNLOCK button on the remote
transmitter or use the key on the
driver’s door lock, f ollow these
instructions.
Press the SEL/RESET button to
enter the selecting mode.
K ey and Remot e Unlock ModeMulti-Inf ormation Display124
10/07/17 09:50:35 31TK8600_129
2011 Odyssey

When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘KEY
AND REMOTE UNLOCK MODE’’
and repeat the procedure again. To exit this mode without changing
the settings, select ‘‘EXIT’’ by
pressing the INFO button, then
press the SEL/RESET button. The
display goes back to the customize
item screen.
CONT INUED
Multi-Inf ormation Display
Instruments and Controls
125
10/07/17 09:50:41 31TK8600_130
2011 Odyssey

ÛÝ
µ
µ ÛÝ
You can choose this item to
customize f rom ‘‘DOOR SETUP’’ by
pressing the INFO ( / ) button
repeatedly.
There are two settings you can
choose f rom:
ANYTIME The sliding door
unlocks and opens when you press
andholdtheslidingdoorbuttonon
theremotetransmitterfor1second.
Thefrontdooronthesamesidealso
unlocks at the same time.
WHEN UNLOCKED In this mode,
you must unlock the sliding door
bef ore opening it.
Press the SEL/RESET button to see
the selections.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
You can customize the power sliding
doors setting so that the power
sliding doors can’t be opened without
unlocking them f irst f rom the
outside.
PSD (Power Sliding Doors) K eyless
Open ModeMulti-Inf ormation Display126
10/07/17 09:50:48 31TK8600_131
2011 Odyssey

When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘PSD
KEYLESS OPEN MODE’’ and
repeat the procedure again. To exit this mode without changing
the settings, select ‘‘EXIT’’ by
pressing the INFO button, then
press the SEL/RESET button. The
display goes back to the customize
item screen.
CONT INUED
Multi-Inf ormation Display
Instruments and Controls
127
10/07/17 09:50:54 31TK8600_132
2011 Odyssey