phone HONDA ODYSSEY 2011 RB3-RB4 / 4.G Service Manual

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thef ollowing two conditions: (1) This devicemay not cause harmf ul interf erence, and(2) this device must accept anyinterf erence received, includinginterf erence that may cause undesiredoperation.
Changes or modif ications not expresslyapproved by the party responsible f orcompliance could void the user’sauthority to operate the equipment.
This device complies with IndustryCanada Standard RSS-210.Operation is subject to the f ollowing twoconditions: (1) this device may not causeinterf erence, and (2) this device mustaccept any interf erence that may causeundesired operation of the device.
Bluetooth
Bluetooth
An incoming call on HFL will
interrupt
Audio when it is
playing. Audio will resume when the
call is ended.
The
name and logos are
registered trademarks owned by
Bluetooth SIG, Inc. and any use of
such marks by Honda Motor Co.,
Ltd. is under license. Other
trademarks and trade names are
those of their respective owners.
If your phone has Call Waiting, a
beep sounds f or an incoming call.
Press and release the PICK-UP
button to put the original call on hold
and answer the incoming call.
To return to the original call, press
the PICK-UP button again. If you
don’t want to answer the incoming
call, disregard it and continue with
your original call. If you want to hang
up the original call and answer the
new call, press the HANG-UP button. HFL L imitations
Wireless Technology
Call Wait ing
Bluet oot h
Bluetooth
HandsFreeL ink
(Models without navigation system)
Features
515
10/07/17 10:43:37 31TK8600_520
2011 Odyssey

Bluetoothhandsf reelink.honda.
com
www.handsfreelink.ca,
HandsFreeLink
(HFL)
allows you to place and receive
phone calls using either the
navigation system controls or voice
commands without the distraction of
handling your cell phone.
To use HFL, you need a Bluetooth-
compatible cell phone. For a list of
compatible phones, pairing
procedures, and special f eature
capabilities:
UsetheInterfaceDialtomakemenu
or list selections.
To select an item on the screen, turn
the interf ace dial lef t or right to
highlight it, and then press ENTER.
To select an item that comes with, , , or icons,
push the interf ace selector up, down,
lef t, or right. Press the CANCEL button to go
back to the previous screen.
In the U.S., visit
or call (888) 528-7876. Press the PHONE button or PICK-
UPbuttontogotothePhonescreen.
In Canada, visit
or call (888) 528-7876. Using HFL
Int erf ace Dial
Bluetooth
HandsFreeL ink
(Models with navigation system)
516
U.S. model is shown.
PHONE BUTTON
CANCEL BUTTON
DIAL ENTER
10/07/17 10:43:48 31TK8600_521
2011 Odyssey

µµ
µ µ To change the volume level of
HFL, use the audio system volume
knob or the steering wheel volume
controls. Try to reduce all background
noise. If the microphone picks up
voices other than yours,
commands may be misinterpreted.
For help at any time, including a list
of available options, say ‘‘Help.’’
Refer to the navigation system
manual f or how to change the
system’s language between English,
French, and Spanish.
Press and release the Talk button
each time you want to make a
command. Af ter the beep, speak in
a clear, natural tone.
Press and
release to answer a call, or press to
go directly to the Phone screen.
Press and
release to end or decline a call.
Press and release
to give a command.
Press and release
to go back to the previous command,
or cancel the command. Airorwindnoisefromthe
dashboard and side vents and all
windows may interfere with the
microphone. Adjust or close them
as necessary.
CONT INUED
Help Feature
L anguage Select ion
Voice Cont rol T ips
HFL Buttons
PICK -UP Button
HANG-UP Button
TALK Button
BACK Button
Bluetooth
HandsFreeL ink
(Models with navigation system)
Features
517
MICROPHONE
TALK BUTTON
BACK BUTTON
HANG-UP BUTTONPICK-UP BUTTON
10/07/17 10:44:00 31TK8600_522
2011 Odyssey

When you receive an incoming call,
you will see the f ollowing displays
and notif ications.
You will see ‘‘HANDSFREELINK’’
on the audio display while HFL is in
use.Some phones may send battery,
signal strength, and roaming status
inf ormation to the screen.
On the navigation screen:
On the Phone screen:DisplayBluetooth
HandsFreeL ink
(Models with navigation system)
518
U.S. model is shown. BATTERY LEVEL STATUS
BLUETOOTH INDICATOR
CALL NAME PHONE DIALING ROAM STATUS SIGNAL STRENGTH
10/07/17 10:44:08 31TK8600_523
2011 Odyssey

CONT INUED
How to Use HFL
Bluetooth
HandsFreeL ink
(Models with navigation system)
Features
519
The ignition switch must be in the ACCESSORY (I) or ON (II) position.Display the paired phone’s previously imported phonebook (or import a new one).
Enter a phone number to dial.
Phone
Phonebook
Dial Display the last 20 incoming, outgoing, or missed calls.
(Appears only when a phone is connected to the system via HFL.)
Display the last 20 incoming calls.
(Appears only when a phone is connected to the system via HFL.) Display the last 20 outgoing calls.
(Appears only when a phone is connected to the system via HFL.)
Display the last 20 missed calls.
(Appears only when a phone is connected to the system via HFL.)
All
Dial
Receive Missed
Call History
More
Speed Dial Displays a list of all 20 speed dial entries. The first 4 speed dial numbers are shown on the
Phone screen.
Voice commands can be used for all above options.
Press and release the Talk button each time you give a command.
10/07/17 10:44:14 31TK8600_524
2011 Odyssey

Bluetooth
HandsFreeL ink
(Models with navigation system)
520
Add New PhoneConnect
Disconnect Delete
Store Voice Tag Delete
Speed Dial Store
Speed Dial
Delete Voice Tag Pair a phone to the system.
Pass-key
Phone
Connection
Phone Setup Connect a phone to the system.
Disconnect a paired phone from the system.
Delete a previously paired phone.
Create a Pass-key number for a paired phone.
Delete a previously stored speed dial number.
Create a voice tag for a speed dial number.
Delete a voice tag for a speed dial number.
Edit
Speed Dial Select a number from the Call History, Phonebook, or manual entry
to store as a speed dial number.
Press and release the Talk button each time you give a command. Voice commands can be used for all above options.
10/07/17 10:44:19 31TK8600_525
2011 Odyssey

CONT INUED
Bluetooth
HandsFreeL ink
(Models with navigation system)
Features
521
Auto Answer
Auto Transfer
Clear PhoneInformation
Phone
Phone Setup Create a phone name/PIN number for a paired phone.
Set calls to automatically transfer from your phone to HFL when you enter the vehicle.
Phone Name/
PIN
Set incoming calls to be automatically answered.
Clear the system of all paired phones, phonebook entries, speed dials, and pass-keys.
Press and release the Talk button each time you give a command. Voice commands can be used for all above options.
10/07/17 10:44:23 31TK8600_526
2011 Odyssey

To use HFL, you need to pair your
Bluetooth-compatible cell phone to
the system.
HFLusesaClass2Bluetooth,which
means, the maximum range between
yourphoneandvehicleis30feet(10
meters).Press the PHONE button or PICK-
UPbuttontogotothePhonescreen. You can set up your phone and other
system options with this menu. Phone Setup
Phone ScreenBluetooth
HandsFreeL ink
(Models with navigation system)
522
Push the selector down for
PHONE SETUP.
10/07/17 10:44:30 31TK8600_527
2011 Odyssey

To pair a cell phone (when there is nophone paired to the system):Press the PHONE button or PICK-
UP button. The system starts pairing
when there is no phone paired to the
system.
Press the PHONE button or PICK-
UP button. The system prompts
you to pair a phone. Select ‘‘Yes’’
on the conf irmation screen.Make sure your phone is set to
discoverable or visibility is ON,
and select ‘‘OK.’’ HFL begins to
searchforyourphone.
1.
2.
CONT INUED
Set up Bluet oot h Phone
Bluetooth
HandsFreeL ink
(Models with navigation system)
Features
523
10/07/17 10:44:37 31TK8600_528
2011 Odyssey

To pair a cell phone (when there are oneor more phones paired to the system):
HFL gives you a 4-digit pass-key
that you will need to input on your
phone.
When your phone prompts you,
input the 4-digit pass-key.
You will receive a notif ication on
the screen and your phone if
pairing is successf ul. Select ‘‘Phone Setup’’ f rom the
Phone screen.
Select ‘‘Connection’’ f rom the
Phone Setup screen.
Select ‘‘Add New Phone.’’
If your phone doesn’t appear on
the list, select ‘‘Phone not f ound?’’
and search f or Bluetooth devices
using your phone. From your
phone, select ‘‘HandsFreeLink.’’ If your phone is f ound, it is
displayed on the screen. Select it
and press ENTER.
2.
3. 1.
5.
3.
4. 6.
7.
Bluetooth
HandsFreeL ink
(Models with navigation system)
524
U.S. model is shown.
10/07/17 10:44:48 31TK8600_529
2011 Odyssey