coolant reservoir HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual
[x] Cancel search | Manufacturer: HONDA, Model Year: 2011, Model line: ODYSSEY, Model: HONDA ODYSSEY 2011 RB3-RB4 / 4.GPages: 722, PDF Size: 17.18 MB
Page 616 of 722
Fluid Locations
Maint enance
613
ENGINE OIL DIPSTICK
(Orange loop)RADIATOR CAP
POWER STEERING FLUID
(Red cap)
WASHER FLUID
(Blue cap)
ENGINE COOLANT RESERVOIR
BRAKE FLUID
(Black cap)
AUTOMATIC
TRANSMISSION
FLUID DIPSTICK
(Yellow loop)
ENGINE OIL FILL CAP
10/07/17 10:56:17 31TK8600_618
2011 Odyssey
Page 629 of 722
Open the hood.
To change a bulb on the driver’s
side, remove the upper part of the
air intake duct.
Use a f lat-tip screwdriver to
remove the holding clip, then
remove the upper part.To change a bulb on the
passenger’s side, use a f lat-tip
screwdriver to remove the holding
clip f rom the engine coolant
reserve tank, and then remove the
engine coolant reserve tank out of
its stay.
Remove the power steering
reservoir f rom the stay bracket to
get enough working space.
1.
2.
LightsHigh Beam Headlights626
HOLDING CLIPS
STAY
COOLANT RESERVE TANK
HOLDING CLIP POWER STEERING RESERVOIR
STAY BRACKET
10/07/17 10:57:56 31TK8600_631
2011 Odyssey
Page 630 of 722
Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
Push the electrical connector onto
the new bulb.
Turn on the headlights to test the
new bulb.
Remove the electrical connector
f rom the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it
about one-quarter turn
counterclockwise. Reinstall the air intake duct
securely.
Reinstall the engine coolant
reserve tank and power steering
reservoir. Open the hood.
Remove the electrical connector
f rom the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
4. 5.
6.
3. 7.
8.
2.
3. 1.
CONT INUED
Driver’s sidePassenger’s side
Lights
L ow Beam Headlight s
Maint enance
627
TAB
CONNECTOR BULB
BULBTAB
CONNECTOR
10/07/17 10:58:08 31TK8600_632
2011 Odyssey
Page 691 of 722
µµ
Î
Î
Î
Î
Î
Î
Î
Specif ications688
Air Conditioning
Dimensions
Engine Weights Capacities
3.3 US qt (3.1
)
5.3 US qt (5.0)
4.2 US qt (4.0)
4.5 US qt (4.3)
2.64 US gal (10.0
)
1.93 US gal (7.3)
24.7 26.5 oz (700 750 g)
ND-OIL8
HFC-134a (R-134a)
21 US gal (79.5)
Refrigerant type
Charge quantity
Lubricant type
78.6 in (1,997 mm) 202.9 in (5,153 mm)
Length
Width
Height
Wheelbase
Track 118.1 in (3,000 mm)
68.1 in (1,730 mm)
68.2 in (1,732 mm)
8,477 lbs (3,845 kg)
Water cooled 4-stroke SOHC
i-VTEC · VCM2, 6-cylinder (V6), gasoline engine
3.50 x 3.66 in (89.0 x 93.0 mm) 212 cu-in (3,471 cm
)
Type
BorexStroke
Displacement
Compression ratio
Spark plugs
DILZKR7A11G
68.4 in (1,737 mm)
10.5 : 1
See the tire information label
attached to the driver’s doorjamb.
Gross vehicle weight rating
Gross combined weight
rating (GCWR) Fuel tank
Engine
coolant
Engine oil
Automatic
transmission
fluid
Windshield
washer
reservoir
4.8 US qt (4.5
)
2.6 US qt (2.5)
7.4 US qt (7.0)
8.0 US qt (7.6)
3.6 US qt (3.4)
Excluding the oil remaining in the engine 0.225 US gal (0.85
)
Including the coolant in the reserve tank and that remaining in the
engine
Reserve tank capacity:
Front
Rear
Approx.
NGK: 1:
2:
3 : Touring modelsChange
Total
Change
Including
filter
Without
filter
Total
Change
Total
U.S. Vehicles
Canada Vehicles
3
1
2
3
10/07/17 11:05:55 31TK8600_693
2011 Odyssey