navigation update HONDA ODYSSEY 2011 RB3-RB4 / 4.G Owners Manual
[x] Cancel search | Manufacturer: HONDA, Model Year: 2011, Model line: ODYSSEY, Model: HONDA ODYSSEY 2011 RB3-RB4 / 4.GPages: 722, PDF Size: 17.18 MB
Page 230 of 722
When you press a f an control button,
the fan is taken out of AUTO mode. When you set the temperature to its
lower limit ( ) or its upper limit
( ), the system runs at f ull
cooling or heating only. It does not
regulate the interior temperature.In the Auto mode, the vehicle’s
interior temperature is
independently regulated f or the
driver, f ront passenger, and rear
passengers according to each
adjusted temperature. The system
also regulates each temperature
basedontheinformationof the
sunlight sensor and the sun’s
position which is updated
automatically by the navigation’s
global positioning system (GPS). For
example, if the driver’s side of the
vehicle is getting too much sun, the
system will adjust to a lower
temperature. When you press this button, the
indicator in the button comes on, and
the passenger’s side temperature
and the rear passenger compartment
is synchronized to the driver’s side
set temperature. Changing the
passenger’s side temperature or
pressing any control button f or the
rear passenger compartment makes
the indicator go off, and takes the
system out of SYNC mode.
On vehicles with navigation system
Climate Control System
SYNC Button
Features
227
10/07/17 10:04:38 31TK8600_232
2011 Odyssey
Page 266 of 722
µµ
µ
µ
µ µ
µ
µ
Youcanstoreupto12
preset channels using the six preset
buttons. Each button stores one
channel f rom the XM1 band and one
channel f rom the XM2 band.
To store a channel: Press the button. Either
XM1 or XM2 will show in the
display. Repeat steps 2 and 3 to store the
f irst six channels.
Once a channel is stored, simply
press and release the proper preset
button to tune to it. Press the button again.
The other XM band will show.
Store the next six channels using
steps 2 and 3.
The signal is
currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon.
The selected
channel has no artist or title
inf ormation at this time.
XM is loading the
audio or program inf ormation.
The channel
currently selected is no longer
broadcasting. The
encryption code is being updated.
Wait until the encryption code is
f ully updated. Channels 0 and 1
should still work normally.
There is
a problem with the XM antenna.
Please consult your dealer.
Use the selector knob, SKIP bar,
CATEGORYbarorSCANbutton
to tune to a desired channel.
The selected
channel number does not exist, is
not part of your subscription, or this
channel has no artist or title
inf ormation at this time.
In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected.
Pick the preset button you want
f or that channel. Press and hold
the button until you hear a beep.
3. 4.
5.
2. 1.
CONT INUED
Preset
XM Radio Display Messages ‘‘NO SIGNA L ’’
‘‘NO INFO’’
‘‘L OA DING’’
‘‘OFF A IR’’ ‘‘UNA UT HORIZED’’
‘‘CHECK A NT ENNA ’’ ‘‘UNA VA IL A BL E’’
Playing the XM
Radio (EX-L model without navigation system)
Features
263
10/07/17 10:09:41 31TK8600_268
2011 Odyssey
Page 287 of 722
On the CD Library Audio display,
press the SETUP button.Select ‘‘UPDATE ALBUM DB’’ or
‘‘Update Album Inf o DB,’’ then
press the selector knob.
Press the selector knob to start
updating.
You can update the Gracenote
Album Inf o. (Gracenote
Media
Database).
Consult your dealer, or visit (in U.S.), or
(in Canada), to acquire
updated f iles.
Inserttheupdatediscintothedisc
slot.
Select the title inf ormation f or the
albumlist, then press the selector
knob. You will be returned to the
normal display. Turn the selector knob to ‘‘GET
ALBUM INFO.,’’ then press the
selector knob. The display will
change to the albumlist. Turn the selector knob to ‘‘CDL
SETUP,’’ then press the selector
knob.
If more than one title is f ound f or
the CD inserted, a screen will
appear to select the correct title. Select ‘‘Yes’’ on the conf irmation
screen, and press the selector
knob to start updating.
Af ter f inishing the update, you will
be returned to the normal display.
Press the SETUP button and turn
the selector knob to ‘‘CDL
SETUP’’ or ‘‘CD Library Setup,’’
then press the selector knob.
1.
2.
3.
4.
1.
2. 3.
www.honda.com
www.honda.ca On U.S. EX model
On U.S. EX model
On EX-L and Canadian EX models
Playing CD L ibrary A udio (EX, EX-L models without navigation system)A cquiring T itle Inf ormation Updating Gracenote
Album Inf o
(Gracenote
Media Database)
284
NOTE:
10/07/17 20:21:20 31TK8600_289
2011 Odyssey
Page 297 of 722
If you see an error message on the
audio display while playing an iPod,
f ind the solution in the chart to the
right. If you cannot clear the error
message, take your vehicle to your
dealer.Error Message
Solution
There is a problem with the USB adapter unit.
Appears when the overcurrent protection feature of the system stops
supplying power to USB because an incompatible device is connected.
Disconnect the device. Then, turn the audio system off, and turn it on
again. Do not reconnect the device that caused the error.
Appears when the iPod is empty. Store some files in the iPod.
Appears when an unsupported device is connected. Disconnect the
device.
Appears when an unsupported iPod is connected. See page 287for
specification information for iPods. If it appears when a supported
iPod is connected, update the iPod software to the newer version.
Appears when the system does not acknowledge the iPod. Reconnect
the iPod.
iPodError Messages (Models without navigation system)
294
USB ERROR
BAD USB DEVICE PLEASE CHECK OWNERSMANUAL
NO SONG
UNSUPPORTED
UNSUPPORTED VER. CONNECT RETRY
10/07/22 15:40:19 31TK8600_299
2011 Odyssey
Page 319 of 722
Ú
On vehicles with navigation systemThe navigation system receives
signals f rom the global positioning
system (GPS), and the displayed
time is updated automatically by the
GPS. Ref er to the navigation system
manual f or how to adjust the time.
Turn the selector knob to change
the setting between 12H and 24H,
and count the numbers up or down.
To enter the clock setting, press
the selector knob repeatedly to
select ‘‘SET’’ or ‘‘EXIT,’’ then press
the knob. The display will return
to the setup menu.
Press the selector knob to select
the item which you want to adjust.
Each time you press the selector
knob, the selected item changes
between hours, minutes, SET and
EXIT. The selected item is
indicated with in the display.
2. 3.
4.
Setting the Clock316U.S. EX models
EX-L and Canadian EX models
10/07/17 10:16:26 31TK8600_321
2011 Odyssey
Page 339 of 722
µµ
µ
µ
µ
µ µ
Once a channel is stored, press
and release the proper preset
button to tune to it.
Press the button or scroll
up again. The other XM band will
be shown. Store the next six
channels using steps 2 and 3. Repeat steps 2 and 3 to store the
f irst six channels. Pick the preset button you want
f or that channel. Press and hold
the preset button until you hear a
beep. You can also pick the
number with the interf ace dial.
Select your desired number and
press and hold ENTER on the
interf ace selector. In category mode, only channels
within that category can be
selected. In channel mode, all
channels can be selected. Use the tune, list, or scan f unction
to tune to a desired channel. The selected
channel has no artist or title
inf ormation at this time.
There is
a problem with the XM antenna.
Please consult your dealer.
The signal is
currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon. XM is loading the
audio or program inf ormation. The channel
currently selected is no longer
broadcasting.
The
encryption code is being updated.
Wait until the encryption code is
f ully updated. Channels 0 and 1
should still work normally. The selected
channel number does not exist, is
not part of your subscription, or this
channel has no artist or title
inf ormation at this time.
5. 3.
4. 2. XM Radio Display Messages‘‘NO INFO’’
‘‘CHECK A NT ENNA ’’
‘‘NO SIGNA L ’’ ‘‘L OA DING’’ ‘‘OFF A IR’’
‘‘UNA UT HORIZED’’ ‘‘UNA VA IL A BL E’’
Playing the XM
Radio (Models with navigation system)
336
10/07/17 10:18:53 31TK8600_341
2011 Odyssey
Page 381 of 722
You can update the GracenoteAlbum Inf o (Gracenote
Media
Database) that is included with the
navigation system.
Insert the update disc into the disc
slot, or connect the USB f lash
memory device that includes the
update.
To check the HDD audio capacity,
push the interf ace selector down to
display the AUDIO MENU. Turn the
interf ace dial to select HDD Setup,
then press ENTER. You can check the HDD Audio
capacity and remaining space as well
as the Gracenote Music Recognition
Service (CDDB) version included
with the navigation system on the
HDD Setup screen.
Push the interf ace selector down
to display the AUDIO MENU.
Turn the interf ace dial and select
Get Music Inf o., then press
ENTER.
On the ‘‘Select an Album’’ screen,
turn the interf ace dial and select
the title inf ormation f or the
Original Playlist, then press
ENTER. You will be returned to
the ‘‘Audio Menu’’ screen.
Consult your dealer, or visit
(in U.S.), or
(in Canada), to acquire
updated f iles.
1.
1.
2.
3.
www.honda.com
www.honda.caUpdating Gracenote
Album Inf o
(Gracenote
Media Database)
Checking HDD A udio Capacity
A cquiring T itle Inf ormation
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)378
NOTE:
MAXIMUM CAPACITY
VERSION
REMAINING CAPACITY
10/07/17 10:24:37 31TK8600_383
2011 Odyssey
Page 382 of 722
Push the interf ace selector down
to select AUDIO MENU in the
HDD playback screen or CD
playback screen.
Turn the interf ace dial to select
HDD Setup, then press ENTER on
the interf ace selector.Any music, data, calendar entries,
etc. that have been stored on the
HDD can be deleted.
Press the INFO button, rotate the
interf ace dial to select ‘‘Set up,’’
and press ENTER.
Move the interface selector to the
right to navigate to the ‘‘Set up
(Other)’’ screen.
On the ‘‘Set up (Other)’’ screen,
rotate the interface dial to select
‘‘Clear Personal Data,’’ and press
ENTER.
Select the item you wish to delete.
Turn the interf ace dial and select
Gracenote Inf o. Update, then
press ENTER on the interf ace
selector.
Once you perf orm an update, any
inf ormation you edited bef ore will be
overwritten. Af ter updating is complete, press
ENTER on the conf irmation
screen. Turn the interf ace dial to select
OK on the conf irmation screen. Turn the dial to select Yes on the
conf irmation screen, and the
update will start. Turn the dial to select USB or
DISC on the Update Gracenote by
screen,thenpressENTERonthe
selector.
2.
3. 4.
5.
6.
7.
8.
1.
2.
3.
4.
CONT INUED
Clearing t he HDD
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Features
379
NOTE:
10/07/17 10:24:50 31TK8600_384
2011 Odyssey