reset HONDA PILOT 2012 2.G Owner's Manual

ÛÝ
Û
Ý Press the SEL/RESET button to see
the selections.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE

The select/reset knob on the
instrument panel controls the
brightness of the instrument panel
lights. Turn the knob to adjust the
brightness.The level of brightness is shown on
the inf ormation display while you
adjust it. It goes out about 5 seconds
af ter you f inish adjusting.
You will hear a beep when maximum
or minimum brightness is reached.
You will also hear a beep when the
maximum level is canceled by
turning the knob a click to the lef t.
To reduce glare at night, the
instrument panel illumination dims
when you turn the light switch to
or . Turning the select/
reset knob to the right until you hear
a beep will cancel the reduced
brightness.Except Touring models
Instrument Panel Brightness
130
U.S. model is shown.
Main MenuTable of Contents

Playing the FM/AM Radio (U.S. LX model)
212
PRESET BUTTONS
DISPLAY
FM BUTTON
AM BUTTON
TITLE BUTTON A.SEL (AUTO SELECT) BUTTON FOLDER BAR
SCAN BUTTON /VOL (POWER/VOLUME) KNOB
SKIP BUTTON
SKIP BUTTON
TUNE/ (SOUND) KNOB
PRESET BUTTONS
Main MenuTable of Contents

µ
µ
µ
The band and f requency that the
radio was last tuned to are displayed.
To change bands, press the AM or
FM button. On the FM band, ST will
be displayed if the station is
broadcasting in stereo. Stereo
reproduction in AM is not available.
On the AM band, AM noise
reduction turns on automatically.
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob or the AM or
FM button. Adjust the volume by
turning the power/volume knob.
You can use any of f ive methods to
f ind radio stations on the selected
band: tune, skip, scan, the preset
buttons, and auto select.
On the FM band, you can also use
the f eatures provided by the radio
data system (RDS). For more
inf ormation on the RDS, see page
. The scan f unction samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station f or about 10 seconds.
If you do nothing, the system will
scan f or the next strong station and
play it f or 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
Use the TUNE knob to
tune the radio to a desired f requency.
Turn the knob right to tune to a
higher f requency, or lef t to tune to a
lower f requency. Each time you press and release
either of the SKIP buttons ( or
), the radio f requency changes
in small increments.
The skip f unction searches
up and down f rom the current
f requency to f ind a station with a
strong signal. To activate it, press
either of the SKIP buttons ( or ), then release it.
215
CONT INUED
To Select a Station
To Play the Radio
SCAN
TUNE
SK IP
Playing the FM/AM Radio (U.S. LX model)
Features
213
Main MenuTable of Contents

µµEach preset button can
store one f requency on AM and two
f requencies on FM. If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
You will see a ‘‘0

Playing the FM/AM Radio (EX, EX-L , and Canadian L X models without navigation system)
228
SELECTOR KNOBPOWER/VOLUME KNOB
RETURN BUTTON SCAN BUTTON TITLE BUTTON
AM BUTTON
FM BUTTON
SETUP BUTTON
ALBUM/FOLDER BAR
PRESET BUTTONS
PRESET BUTTONS
U.S. EX and Canadian LX models
Main MenuTable of Contents

Playing the FM/AM Radio (EX, EX-L , and Canadian L X models without navigation system)
Features
229
AM/FM BUTTON POWER/VOLUME KNOB
TITLE
BUTTON
SETUP BUTTON
SELECTOR KNOB
EX-L models
Canadian EX models EX-L models with Rear
Entertainment System
AM/FM BUTTON
RETURN BUTTONRETURN BUTTON
CATEGORY
BAR
PRESET
BUTTONS
SCAN
BUTTON
SETUP BUTTON
SELECTOR KNOB
RETURN BUTTON
SCAN
BUTTON
TITLE
BUTTON POWER/
VOLUMEKNOB
FOLDER
BAR AM/FM BUTTON CATEGORY BAR
PRESET BUTTONS
SELECTOR KNOB SETUP BUTTON
TITLE
BUTTON
POWER/
VOLUMEKNOB
SKIP BAR
SCAN
BUTTON
PRESET
BUTTONS
Main MenuTable of Contents

µ
µ
You can use any of f ive methods to
f ind radio stations on the selected
band: tune, seek, scan, the preset
buttons, and auto select.
On the AM band, AM noise
reduction turns on automatically.
The band and f requency that the
radio was last tuned to are displayed.
To change bands, press the AM or
FM button, or AM/FM button. On
the FM band, ST will be displayed if
the station is broadcasting in stereo.
Stereo reproduction in AM is not
available.
On the FM band, you can also use
the f eatures provided by the radio
data system (RDS). For more
inf ormation on the RDS, see page
. The skip f unction searches
up and down f rom the current
f requency to f ind a station with a
strong signal. To activate it, press
and hold the or side of the
SKIP bar until you hear a beep, then
release it.
Use the selector knob to
tune the radio to a desired f requency.
Turn the knob right to tune to a
higher f requency, or lef t to tune to a
lower f requency.
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob. Adjust the
volume by turning the same knob.
232
To Select a Station
To Play the Radio SK IP
TUNE
Playing the FM/AM Radio (EX, EX-L , and Canadian L X models without navigation system)
230
Main MenuTable of Contents

µ
µ µ
Each preset button can
store one f requency on AM and two
f requencies on FM.
Select the desired band, AM or
FM. You can store one f requency
on FM1, and one f requency on
FM2witheachpresetbutton.
Usethetune,skip,scan,orRDS
function to tune the radio to a
desired station.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
The scan f unction samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station f or about 10 seconds.
If you do nothing, the system will
scan f or the next strong station and
play it f or 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again. If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Pick a preset button, then press
and hold it until you hear a beep. Push the SETUP button to display
the setup MENU. Turn the selector
knob to select Auto Select, then
press the selector knob. The display
changes to the auto select mode.
Select ‘‘ON,

CONT INUED
Playing t he XMRadio (EX-L model wit hout navigat ion syst em)
Features
237
SCAN
BUTTON
SKIP BAR
SETUP
BUTTONCATEGORY
BAR
POWER/VOLUME KNOB
PRESET
BUTTONS
PRESET
BUTTONS TITLE BUTTON
XM BUTTON
RETURN BUTTON SELECTOR KNOB SELECTOR KNOB
EX-L models
EX-L models with Rear Entertainment System
TITLE BUTTON XM BUTTON
POWER/VOLUMEKNOB
SKIP BAR
SCAN BUTTON CATEGORY BAR
SETUP BUTTON
RETURN BUTTON PRESET
BUTTONS
Main MenuTable of Contents