Page 63 HONDA PILOT 2012 2.G Owner's Guide

To enter the customizing mode,
press the SEL/RESET button.If you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, or move the shif t lever out
of Park, the display will change to
the normal screen.
If you want the settings as they were
when the vehicle lef t the f actory,
select DEFAULT ALL, as described
on page .
Ref er to the table on the f ollowing
pages about the settings you want to
customize.
If you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button.
To change the settings, the ignition
switch must be in the ON (II)
position, and the vehicle must be
stopped with the transmission in
Park. You can customize some vehicle
control settings f or ‘‘DRIVER 1

ÎÎ
ÎÎ
Î
Î
Î Î
Î
µ™¶ ™
µ™¶ ™
Î Î
Group Setup Menu Item Description Page
Setting Option
MET ER SET UP
(P.101)
POSITION SETUP
(P.106)
LIGHTING SETUP
(P.108) LANGUAGE SELECT ION
ADJUST OUTSIDE
TEMP. DISPLAY
TRIP A INFO RESET
MEMORY POSIT ION LINK
INTERIOR LIGHT
DIMMING T IME
HEADLIGHT
AUTO OFF TIMER
AUTO LIGHT
SENSITIVITY Changes the language used in the display.
Changes the outside temperature reading above or
below its current reading.
Changes the setting of how to reset trip meter A,
average fuel A, elapsed time A, and average speed A.
Changes the driver

Î
Î
Î
Î
Î
Î Î
Î
Î
DRIVER DOOR /
AL L DOORS
Group Setup Description Setting Option Page
Menu Item
DOOR/WINDOW
SETUP
(P.113)
DEFAULT ALL
(P.98) Changes the setting of when to automatically lock
the doors.
Changes the setting of when to automatically
unlock the driver

Û
Ý
ÛÝ
ÛÝ
You can customize some of the
vehicle control settings to your
pref erence. Here are the settings
you can customize:
METER SETUP
LIGHTING SETUP
POSITION SETUP
DOOR/WINDOW SETUP Each time you press the INFO ( /
) button, the screen changes as
shownonthenextpage.Pressthe
INFO( / )buttonuntilyousee
the setup you want to customize,
then press the SEL/RESET button
to enter your selection.
When you want to change the
vehicle control settings, press the
INFO ( / ) button to select CHG
SETTING, then press the SEL/
RESET button.
CONT INUED
Mult i-Inf ormation Display
Customize Settings
Inst rument s and Cont rols
99
Touring model is shown.
Main MenuTable of Contents

Mult i-Inf ormation Display
100
Select
‘‘DEFAULT ALL’’
Select ‘‘EXIT’’
Select ‘‘CANCEL’’
INFO button
SEL/RESET button
Touring model is shown. METER SETUP
(See page 101)
POSITION SETUP
(See page 106)
LIGHTING SETUP
(See page 108) DOOR/WINDOW SETUP
(See page 113)
Main MenuTable of Contents

Û
Ý
ÛÝ
Keyless Lock Acknowledgment
When you push the LOCK button on
the remote transmitter, some
exterior lights f lash, and a beeper
sounds when you push the LOCK
button again within 5 seconds to
verify that the doors and the tailgate
arelockedandthesecuritysystem
has set (see page ). You can
customize the exterior lights not to
f lash and the beeper not to sound.
You can choose this item to
customize f rom ‘‘DOOR/WINDOW
SETUP

Make sure the rear window is clear
and you have good visibility bef ore
starting to drive.
The rear window def ogger will clear
fog, frost, and thin ice from the
window. Push the def ogger button to
turn it on and off. The indicator in
the button lights to show the
def ogger is on. If you do not turn it
of f , the def ogger will shut itself of f
af ter about 15 minutes. It also shuts
of f when you turn of f the ignition.
You have to turn it on again when
you restart the vehicle. The def ogger wires on the inside of
the rear window can be accidentally
damaged. When cleaning the glass,
always wipe side-to-side.
Pushing this button also turns the
mirror heaters on or of f . For more
inf ormation, see page .
Pushthebuttontoturnonthe
hazard warning lights (f our-way
flashers). This causes all four
outside turn signals and both turn
indicators in the instrument panel to
f lash. Use the hazard warning lights
if you need to park in a dangerous
area near heavy traffic, or if your
vehicle is disabled. 173
If equipped
Rear Window Def ogger
Hazard Warning Button
Hazard Warning Button, Rear Window Def ogger
Inst rument s and Cont rols
129
Main MenuTable of Contents

The tailgate can be opened and
closed with the remote transmitter
(see page ) or the switch in the
driver

To open the glass hatch, press the
glass hatch release button on the
tailgate.
If you need to unlock the tailgate
manually, it means there is a
problem with the tailgate. Have the
vehicle checked by your dealer.
Push the release lever to the right as
shown.
Make sure the shif t lever is in the
Park (P) position.
If youcannotopenthetailgate,
remove the cover on the back of the
tailgate (see page ). Make sure
the shif t lever is in the Park (P)
position. Push the release lever to
the right as shown, then pull the
outer handle to open the tailgate.To close the glass hatch, lower it and
press on the handle until it latches.
147
On EX-L and Touring models Except EX-L and Touring models
Tailgate and Glass Hatch
Glass Hatch
148
GLASS HATCH RELEASE BUTTON
Main MenuTable of Contents

The rear wiper will not operate with
the glass hatch open. If you open the
glass hatch while the rear wiper is
operating, the wiper will return to its
parked position (see page ). The
wiper will resume operation af ter the
glass hatch is closed.Keepthetailgateandtheglasshatch
closed at all times while driving to
avoid damaging the tailgate and the
glass hatch, and to prevent exhaust
gas from getting into the interior.
See on
page .
You can also open the glass hatch by
pressing the glass hatch release
button on the driver