navigation system HONDA PILOT 2012 2.G Owner's Guide

If you see an error message on the
audio display while playing a USB
f lash memory device, f ind the
solution in the chart to the right. If
you cannot clear the error message,
take your vehicle to your dealer.Error Message Solution
There is a problem with the USB adapter unit.
Appears when the overcurrent protection f eature of the system stops
supplying power to USB because an incompatible device is connected.
Disconnect the device. Then, turn the audio system of f , and turn it on
again. Do not reconnect the device that caused the error.
Appears when the files in the USB flash memory device are DRM or
an unsupported format. This error message appears for a few seconds,
then plays the next song.
Appears when the USB f lash memory device is empty or there are no
MP3, WMA, or AAC files in the USB flash memory device. Save some
MP3, WMA, or AAC files in the USB flash memory device.
Appears when an unsupported device is connected. See page 275 for
specification information on USB flash memory devices. If it appears
when the supported device is connected, reconnect the device.
USB Flash Memory Device Error Messages (EX-L and Canadian EX models without navigation system)
Features
281
USB ERROR
BAD USB DEVICE
PLEASE CHECK OWNERSMANUAL
UNPLAYABLE FILE
NO SONG
UNSUPPORTED
Main MenuTable of Contents

BluetoothAudio System (EX, EX-L , and Canadian L X models without navigation system)
282
SELECTOR KNOBBluetooth Indicator
SETUP BUTTON
SKIP BAR
POWER/VOLUME KNOB
RETURN BUTTON CD/AUX BUTTON
U.S. EX and Canadian LX models
Main MenuTable of Contents

CONT INUED
BluetoothAudio System (EX, EX-L , and Canadian L X models without navigation system)
Features
283
EX-L models
Canadian EX models EX-L models with Rear
Entertainment System
Bluetooth Indicator
SELECTOR KNOB
RETURN BUTTON SETUP BUTTON
RETURN BUTTON SETUP BUTTON
SKIP BAR
RETURN BUTTON
USB/AUX BUTTON
SKIP BAR
SELECTOR KNOB POWER/VOLUME KNOB
POWER/VOLUMEKNOB
POWER/VOLUMEKNOB USB/AUX BUTTON
USB/AUX BUTTON
SKIP BAR
SELECTOR KNOBSETUP BUTTON
Main MenuTable of Contents

Ú
On vehicles with navigation system
The navigation system receives
signals f rom the global positioning
system (GPS), and the displayed
time is updated automatically by the
GPS. Ref er to the navigation system
manual f or how to adjust the time.
Turn the selector knob to change
the setting between 12H and 24H,
and count the numbers up or down.
To enter the clock setting, press
the selector knob repeatedly to
select ‘‘SET

The dial turns lef t and right. Use it to
make selections or adjustments to a
list or menu on the screen.
The selector can be pushed lef t,
right, up, down, and in. Use the
selector to scroll through lists, to
select menus, and to highlight menu
items. When you make a selection,
press ENTER to go to that selection.
Most audio system f unctions can still
be controlled by standard buttons,
dials, and knobs, but some f unctions
can only be accessed using the
interf ace dial. The interf ace dial has
twoparts,adialandaselector.
The audio system, including the
music search f eature Song By
Voice , can be operated by voice
control. See the navigation system
manual f or complete details.
Interf ace Dial
Voice Control System
Audio System (Models with navigation system)
298
SELECTORENTER
KNOB
TM
Main MenuTable of Contents

µUse the TUNE knob to
tune the radio to a desired frequency.
Turn the knob right to tune to a
higher f requency, or lef t to tune to a
lower f requency. To tune with the
interf ace dial, push the selector
down, and turn the knob to TUNE.
Then press ENTER on the selector,
andturntheknobtothedesired
f requency. To exit the TUNE mode,
press ENTER on the selector.
The ignition switch must be in the
ACCESSORY (I) or the ON (II)
position. Press the AUDIO button to
view the audio control display. Turn
the system on by pressing the
power/volume knob, the AM, or FM
button. Adjust the volume by turning
the power/volume knob.
On the AM band, AM noise
reduction turns on automatically.
You can use any of f ive methods to
f ind radio stations on the selected
band: tune, skip (seek), scan, the
preset buttons, and auto select.
The band and f requency that the
radio was last tuned to are shown on
the display. To change bands, press
the AM/FM button. You can also
change bands by pushing the
interf ace selector up. Each time you
push it up, the band will change to
FM1, FM2 or AM. On the FM bands,
STEREO will be shown on the
navigation screen and ST on the
center display, if the station is
broadcasting in stereo. Stereo
reproduction on AM is not available.
TUNE
To Play the FM/AM Radio
To Select a Station
Playing the FM/A M Radio (Models with navigation syst em)
300
STEREO INDICATOR TUNE
BAND
Main MenuTable of Contents

µ
µ
The scan f unction samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
The skip (seek)
f unction searches up and down f rom
the current f requency to f ind a
station with a strong signal. To
activate it, press either side ( or ) of the SKIP bar, then release
it. To scan with the interf ace dial, push
the interf ace selector down, and turn
the interf ace dial to select Scan, then
press ENTER on the interf ace
selector.
The system will scan f or a station
with a strong signal. When it f inds a
strong signal, it will stop and play
that station for about 10 seconds. If
you do nothing, the system will then
scan f or the next strong station and
play it f or 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
CONT INUED
SCAN
SK IP (SEEK )
Playing the FM/A M Radio (Models with navigation syst em)
Features
301
Main MenuTable of Contents

To activate RDS category scan with
the interf ace dial, push the AUDIO
button to display the FM radio
inf ormation on the screen. Push the
interf ace selector down, and turn the
interf ace dial to select RDS search
on the audio menu. Press ENTER on
the interf ace selector. The screen
shows you the RDS category list.
Turn the interface dial to the desired
RDS category.While the RDS category is selected,
move the interface selector to the
lef t or the right to select SCAN.
Then press ENTER to activate the
RDS SCAN.
This f unction displays the radio text
inf ormation of the selected RDS
station.
If the selected RDS station has the
radio text inf ormation, you will see
the text indicator on the screen.
CONT INUED
Radio T ext Display
Playing the FM/A M Radio (Models with navigation system)
Features
307
RDS CATEGORY LIST
SEEK/SCAN ICON (RDS Search mode)
SCAN is selected.
Main MenuTable of Contents

Playing t he XMRadio (Models with navigation system)
Wit hout rear ent ert ainment syst em Wit h rear ent ert ainment syst em
312
POWER/
VOLUME KNOB
AUDIO
BUTTON PRESET
BUTTONS
XM
BUTTON
TITLE
BUTTON
CATEGORY
BAR
AUDIO SCREEN
SCAN
BUTTON INTERFACE DIAL TUNE/SOUND KNOB
POWER/
VOLUMEKNOB PRESET
BUTTONS
XM
BUTTON
TITLE
BUTTON
SCAN
BUTTON TUNE KNOB
AUDIO
BUTTON INTERFACE DIAL CATEGORY
BAR
Main MenuTable of Contents

Your vehicle is capable of receiving XM
Radio anywhere in the United
States and Canada, except Hawaii,
Alaska,andPuertoRico.XMisa
registered trademark of Sirius XM
Radio
,Inc.andXMCANADAis a
registered business name of
Canadian Satellite Radio Inc.
XM Radio receives signals f rom two
satellites to produce clear, high-
quality digital reception. It of f ers
many channels in several categories.
Along with a large selection of
dif f erent types of music, XM Radio
also allows you to view channel and
category selections in the audio
display. To listen to XM Radio, turn the
ignition switch to the ACCESSORY
(I) or ON (II) position. Push the
power/volume knob to turn on the
audio system, and press the
button. The last channel you
listened to will show in the display.
Adjust the volume by turning the
power/volume knob. Each time you push the interface
selector up, the band will change to
XM1 or XM2. Push the AUDIO
button to display XM inf ormation on
the screen. You can operate the XM
radio system with the interf ace dial.
CONT INUED
Operating the XM Radio
Playing t he XMRadio (Models with navigation system)
Features
313
Main MenuTable of Contents