ECU HONDA PILOT 2012 2.G Workshop Manual

HONDA PILOT 2012 2.G Workshop Manual PILOT 2012 2.G HONDA HONDA https://www.carmanualsonline.info/img/13/6013/w960_6013-0.png HONDA PILOT 2012 2.G Workshop Manual

Page 598 of 681

HONDA PILOT 2012 2.G Workshop Manual Place a cloth on the edge of the 
lens segment to prevent scratches. 
Remove each lens segment by 
caref ully prying on its edge with a
small f lat-tip screwdriver. 
Remove the screw under each lens.

Page 623 of 681

HONDA PILOT 2012 2.G Workshop Manual Turn the dial at the bottom of the 
jack clockwise until the top of the
jack contacts the jacking point.
Make sure the jacking point tab is
restinginthejacknotch.Attach the stay to the extension,
then

Page 625 of 681

HONDA PILOT 2012 2.G Workshop Manual Tighten the wheel nuts securely in 
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
f acility.
Tighten the wheel nuts to:Insert the hoist bracket into

Page 626 of 681

HONDA PILOT 2012 2.G Workshop Manual Slowly turn the extension with the 
wheel nut wrench clockwise to
take up the slack of the hoist cable.
Make sure the bracket is seated in
the center hole of the flat tire. 
Turn the extension with th

Page 674 of 681

HONDA PILOT 2012 2.G Workshop Manual CONT INUED
.....................................
Headlights . 125
........................................
Aiming . 586
..................
Automatic Lighting . 126
.........
Daytime Running Lights . 1

Page 677 of 681

HONDA PILOT 2012 2.G Workshop Manual Î
.................................
Rotation Tire . 602
..................................
Safety Belts . 9, 22
............
Safety Defects, Reporting . 660
.................................
Saf ety
Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60