child restraint HONDA PILOT 2012 2.G Owners Manual

Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.To install a LATCH-compatible child
seat in the center seating position on
the second row seat, use the center
lower anchors as shown above. Follow step 1 through 4 as
described previously to secure the
child seat.
Lower the head restraint f irst.
Route the tether strap over the
head restraint and seat-back, then
attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
Push and pull the child seat
f orward and f rom side-to-side to
verif y that it is secure.
Push and pull the child seat
f orward and f rom side-to-side to
verif y that it is secure. Unlatch the detachable seat belt
anchor latch and retract the seat
belt all the way into the ceiling.
Place the latch plate and anchor
latch in their holding slots (see
page ).
6. 7. 2. 3. 4.
1. 163
Using t he Cent er L A T CH
Installing a Child Seat
50
Table of ContentsMain Menu

Each second row seat has a tether
anchorage point behind the seat-
back.For the center seat, lower the head
restraint, then route the tether strap
over the head restraint and seat-back.
Af ter properly securing the child
seat (see page ), lif t the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
1.
52
Second Row Inst allat ion
Installing a Child Seat
54
TETHER ANCHORAGE P OINTTETHER STRAP
Outer seating position
Table of ContentsMain Menu