light HONDA PILOT 2019 Navigation Manual (in English)
[x] Cancel search | Manufacturer: HONDA, Model Year: 2019, Model line: PILOT, Model: HONDA PILOT 2019Pages: 127, PDF Size: 4.92 MB
Page 6 of 127

4
Quick Reference GuideTouchscreen Operation
You can operate the system using your finger on the touchscreen.
The touchscreen can be operated if you are wearing thin gloves, but it may be more difficult for the system to respond.
Tap
Touch the screen lightly with your finger to select an option on the 
screen.
Swipe
Lightly sweep your finger side to si de or up and down to scroll a list 
or map.
You can change the touchscreen sensitivity setting. 2 Refer to the Owners Manual.
Slide
Move your finger slowly across the screen to scroll the map.
Pinch In/Out
Open or close your fingers on the screen in a pinching motion to 
zoom in or out of the map.
19 PILOT NAVI-31TG78300.book  4 ページ  2018年5月24日 木曜日 午前10時52分 
Page 13 of 127

11
Quick Reference GuideVoice Control Operation
Voice Portal Screen
aPress and release the   (Talk) 
button.
 The system beeps when ready for a 
command. Press the   (Hang-Up) 
button to cancel.
b Say  “ Navigation .”
The Voice Command screen is 
displayed.
After that follow the voice prompt 
and say a voice command.
 The audio system is muted during voice 
control mode.
 You can use other voice commands on 
the Voice Portal screen.
 Carefully read the usage note for the 
voice control.
Voice Control System  (P17)
 The system recognizes only certain 
commands.
Available navigation commands 
(P118)Voice Command Screen
a After saying   “ Navigation” from 
the Voice Portal screen, the below 
screen appears.
b Listen for the voice prompt, then say a 
voice command.
 You do not need to press the   (Talk) 
button again in the Voice Command 
screen.
 Available voice commands are 
highlighted on the screen.
19 PILOT NAVI-31TG78300.book  11 ページ  2018年5月24日 木曜日 午前10時52分 
Page 14 of 127

12
Quick Reference GuideTroubleshootingFor more Information (P99)
Why does the vehicle position icon on the map appear 
slightly off my actual position, especially at intersections?
This is normal. The navigation system is unaware of the 
width of intersections. Large di fferences in vehicle position 
can indicate a temporary loss of the GPS signal.
Why does the “Arrival time” display sometimes increase 
even though I am getting closer to my destination?
The “Arrival time” is based on the speed limit on each 
road. Depending on the traffic conditions, the “Arrival 
time” may be calculated  to be earlier or later.
Why does my clock frequently change the time forward 
and backward by one hour?
The clock setting is automatically updated based on your 
GPS location. If you are driving near a time zone border, 
the automatic update is the likely reason.
How do I turn on the navigation system voice guidance?
●Press the   (Home) icon.
Select Navigation  >   > Guidance Volume .
Turn up the volume if it is low.
●Adjust the volume using the volume knob during the 
voice guidance.
How do I specify a destination when an entered city or 
street could not be found?
Try selecting the destinat ion directly from the map.
19 PILOT NAVI-31TG78300.book  12 ページ  2018年5月24日 木曜日 午前10時52分 
Page 19 of 127

17
System Setup
Voice Control System
Your vehicle has a voice control system that allows hands-free operation of the 
navigation system functions.
The voice control system uses the    (Talk) and   (Hang-Up) buttons on the 
steering wheel and a microphone near the map lights on the ceiling.
For details of the   (Talk) button,   (Hang-Up) button and microphone position, 
see the Owner's Manual.
Voice Recognition
To achieve optimum voice re cognition when using the navigation voice control 
system:
• Make sure the correct screen is displa yed for the voice command that you are 
using.
The system recognizes  only certain commands.
Available navigation commands:
2 Voice Commands P. 118
• Close the windows, moonroof*, or panoramic roof*.
• Adjust the dashboard and side vents so air does not blow onto the microphone  on the ceiling.
• Speak in a clear, natural speaking voice without paus ing between words.
• Reduce any background noise if possibl e. The system may misinterpret your 
command if more than one person  is speaking at the same time.
1Voice Control System
When you press the   (Talk) button, the system 
prompts you to say a voice command. Press and 
release the   (Talk) butt on again to bypass this 
prompt and give a command.
1 Voice Recognition
The voice control system can only be used from the 
driver’s seat because  the microphone unit removes 
noises from the front  passenger’s side.
* Not available on all models
19 PILOT NAVI-31TG78300.book  17 ページ  2018年5月24日 木曜日 午前10時52分 
Page 33 of 127

31
uuDisplay Mode Settings uSwitching Display Mode Manually
System SetupIllumination 
control Operation
 (Display 
Mode) iconSelects Day or Night display mode when the user 
wants to change the brightness of the display 
temporarily.
Remember:  This icon overrides all other display 
brightness adjustments either set automatically by 
the sunlight sensor or manually from the System 
settings screen.
Sunlight sensor 
(see your Owner’s 
Manual for 
location) If the sunlight sensor detects daylight and the 
headlights are turned on, the system automatically 
overrides the Nigh
t display and displays the Day 
display mode.
Remember:  If desired, use the   (Display Mode) 
icon to override th is automatic choice.
Dash illumination 
adjustment knob 
(see your Owner’s 
Manual for 
location)When the headlights are turn ed on, and you wish to 
have the Day display mode, adjust the illumination 
to the full brightness (beeps).
Remember:  Adjust the dash brightness back to 
midrange to allow auto switching by sensing the 
headlights are on or off.
Headlights (Auto/
On/Off) When turned on, the di
splay changes to Night 
display mode. 
The previous three controls listed above can 
“cancel” this function.
Remember:  Use the   (Display Mode) icon to 
adjust the brightness of the display.
19 PILOT NAVI-31TG78300.book  31 ページ  2018年5月24日 木曜日 午前10時52分