jump cable HONDA PRELUDE 1992 Owners Manual

Jump Starting

3. Connect one jumper cable to the positive (+) terminal on the
booster battery. Connect the
other end to the positive (+)
terminal on your Honda's battery. 4. Connect the second jumper cable
to the negative (—) terminal on
the booster battery. Connect the other end to the grounding strap
as shown. Do not connect this
jumper cable to any other part of
the engine.
5. If the booster battery is in another car, have an assistant
start that car and run it at a fast

idle.
6. Start your car. If the starter
motor still operates slowly, check
the jumper cable connections to
make sure they have good metal-
to-metal contact.
7. Once your car is running, disconnect the negative cable
from your car, then from the
booster battery. Disconnect the positive cable from your car,
then the booster battery.

Taking Care of the Unexpected
BOOSTER BATTERYProCarManuals.comMain Menu Table of Contents s t