seat memory HONDA PRELUDE 1992 Owners Manual

Seat Adjustments

Additional Driver's Seat
Adjustments

The driver's seat in the Si and
Si 4WS models in the U. S., and the SR and SR 4WS models in Canada
has additional features.
They are: lumbar support adjust-
ment, fine adjustment of seat-back
angle, and seat-back angle memory. Lumbar Support
Vary the lumbar support by moving the lever on the right side
of the seat-back. Fine Adjustment of Seat-back
Angle
Adjust the seat-back angle to the desired position with the adjust-
ment lever on the outside of the
seat bottom. Then use the fine
adjustment lever at the base of the
seat-back to change the angle a
small amount to suit your prefer-
ence. Move the lever forward and
backward.

Instruments and Controls
CONTINUEDProCarManuals.comMain Menu Table of Contents s t

Seat Adjustments, Seat Heaters

Seat-back Angle Memory
After you have adjusted the seat-
back angle, press the MEMORY
button. This retains the setting so the seat-back will return to thatposition after you tilt it forward for
rear seat access. If you do not press
the MEMORY button, the seat-
back will return to about the midpoint of its adjustment range.
You will then have to readjust the
angle to your preference.
Seat Heaters
Available only on SR 4WS model in

Canada

Both fron
t
seats are equipped with
seat heaters. The ignition must be
ON (II) to use them. Push the
heater switch to turn the power on
or off. The pilot lamp lights and
remains on while the heaters are on. Do not use the seat heaters when
the engine is off or when idling for
a long period of time. They can
drain the battery, making your car
hard to start.

Instruments and Controls
INDICATORSProCarManuals.comMain Menu Table of Contents s t