alternator belt HONDA PRELUDE 2000 Owner's Manual (in English)
[x] Cancel search | Manufacturer: HONDA, Model Year: 2000, Model line: PRELUDE, Model: HONDA PRELUDE 2000Pages: 293, PDF Size: 3.43 MB
Page 207 of 293
Driv
e Belts , Timin g Bel t
Driv e Belt s
Check the condition of the two drive
belts. Examine the edges of each belt for cracks or fraying.Check the tension of each belt by
pushing on it with your thumb
midway between the pulleys. The belts should have the following
"play" or deflection.
Alternator belt:
0.37 — 0.49 in (9.5 — 12.5 mm)
Power steering belt:
0.53 — 0.65 in (13.5 — 16.5 mm)
If you see signs o
f wear or looseness,
have your dealer adjust or replace the belts.
Timin
g Bel t
The timing belt and balancer belt should normally be replaced at the
intervals shown in the maintenance schedule.
Replace these belts at 60.000 miles (U.S.) or 100,000 km (Canada) if you
regularly drive your car in one or
more of these conditions: In very high temperatures
(over 110°F,43°C).
In very low temperatures
(under — 20°F, — 29°C).
Maintenanc e
POWE
R STEERIN G BEL T
ALTERNATO R BEL T