light HONDA RIDGELINE 2012 1.G Technology Reference Guide

Malfunction IndicatorsIf an indicator remains on, there may be a problem; see your dealer
On\bOff Indicators
Condition IndicatorsAction is needed by driver
PASSENGER AIRBAGOFF(located on center panel)
SIDE AIRBAGOFF
CRUISE CONTROL on
Bed lightson
Headlights on
Turn signals/hazards on
High beamson
Charging system
Low brake fluid
Low oil pressure
ABS(antilock brake system)
VTM4(variable torque management 4WD)
Malfunction lamp(check engine light)
VSA®(vehicle stability assist)SRS(supplemental restraint system)
DRL(daytime running lights)TPMS*(tire pressure monitoring system)
Parking brake on:
Release
Door/Tailgate open:
Close door(s)/tailgate
InBed Trunk open:
Close trunk
Maintenance Minder:
Make dealer appointment
Washer Level (if equipped):
Add fluidA/T Temperature:
Pull over and let engine idle
VTM4 (blinks):
Pull over and let engine idleMessage indicator*:
Press Info button
*models with navigation only
*models without navigation only
Low fuel:
Refill
Back window open:
Close back window
Low tire pressure:
Add air
INSTRUMENT PANEL INDICATORS
Immobilizer
Flashes: improperly coded key;
use correct key
Briefly appear with each engine start\b Red and amber indicators are most critical\b Blue
and green indicators are used for general information\b
4\b
CRUISE MAIN on
model with navigation shown
Seat belt reminder:
Fasten seat belt(s) VSA
OFF
12 Ridgeline TRG\fATG_NEW STYLE 9/15/2011 8\f45 AM Page 4

Press and release the HFL Talk button before you give a command\b
HFL Phonebook
1\b Say “Phonebook.”
Store up to 50 names and their phone numbers, which can be used
as speed dials\b
\f\b Say “Store.” 3\b Say
the name of the contact,
and then the phone number\b
4\b To call a contact once an entry is stored, say“Call Mike.”
Press and release the Navi Talk button before you give a command\b
Cellular Phonebook *
1\b Say “Display Information.”
Say “Cellular Phone.”
Import your entire cell phone’s address book to the navigation system\b
*not available on all phones
\f\b Say
“Import Cellular
Phonebook.” 3\b HFL begins to import your
contacts to the system\b4\b To call a contact, say“Search
Imported Phonebook” and select
the name and number\b
H O M E L I N K®( i f e q u i p p e d )
The HomeLink Universal Transceiver can be programmed to operate up to three
remotecontrolled devices around your home, such as garage doors, lighting, or home
security systems\b
Press and hold the button on the
remote and the HomeLink button at
the same t ime. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again. Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on.YES
NO YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate. Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink, see the owner’s manual included
with the device you are trying to program, call HomeLink at (800) 35535\315, or
visit www.homelink.com \b
2021
12 Ridgeline TRG\fATG_NEW STYLE 9/15/2011 8\f48 AM Page 12