bulb HONDA S2000 2004 2.G Owners Manual

HONDA S2000 2004 2.G Owners Manual S2000 2004 2.G HONDA HONDA https://www.carmanualsonline.info/img/13/6054/w960_6054-0.png HONDA S2000 2004 2.G Owners Manual

Page 45 of 208

HONDA S2000 2004 2.G Owners Manual The lef t or right turn signal indicator
blinks when you signal a lane change
or turn. If the indicators do not blink
or blink rapidly, it usually means one
of the turn signal bulbs is burned out
(see

Page 71 of 208

HONDA S2000 2004 2.G Owners Manual The interior light has a three-
position switch. In the OFF position,
the light does not come on. In the
center position, the interior light
comes on when you open either door.
In the ON position, the

Page 140 of 208

HONDA S2000 2004 2.G Owners Manual CONT INUED
Theheadlightswereproperlyaimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk, readjustment may be required.
Adjustments should be perf ormed by
a Honda dealer o

Page 141 of 208

HONDA S2000 2004 2.G Owners Manual Open the hood.
If you need to change the high
beam headlight bulb on the lef t
side, remove the coolant reserve
tank f rom its holder by pulling it
straight up.
Remove the electrical connector
f rom t

Page 142 of 208

HONDA S2000 2004 2.G Owners Manual If you are changing the bulb on
the driver’s side, start the engine,
turn the steering wheel all the way
to the right, then turn off the
engine. If you are changing the
bulb on the passenger’s sid

Page 143 of 208

HONDA S2000 2004 2.G Owners Manual Use a small flat-tipped screwdriver
to pry caref ully on the back edge
of the side turn signal assembly
until it pops out of the body.
Turn the bulb holder one-quarter
turn counterclockwise to remove

Page 144 of 208

HONDA S2000 2004 2.G Owners Manual Open the trunk.
Remove the fasteners from the
trunk lining. To remove a f astener,
push on the center of the head
until it pops in, then pull the
f astener out.
Pull the lining back.Remove the socket

Page 145 of 208

HONDA S2000 2004 2.G Owners Manual Install the new bulb into the
socket.
Push the socket into the light
assembly, and turn it clockwise
until it locks.
Testthelightstomakesurethe
new bulb is working.Install the trunk lining, and secure

Page 200 of 208

HONDA S2000 2004 2.G Owners Manual CONT INUED
Accessories.................................
Installation .105
...............
Accessory Power Socket . 70
ACCESSORY (Ignition Key .......................................
Position) .53
....

Page 202 of 208

HONDA S2000 2004 2.G Owners Manual CONT INUED
.............
Halogen Headlight Bulbs . 137
..............
Hazard Warning Flashers . 49
Headlights ............
Daytime Running Lights . 48
..................
High Beam Indicator . 42
.....
Page:   1-10 11-20 next >