belt HONDA S2000 2006 2.G User Guide

Your seat belt system includes lap/
shoulder belts in both seating
positions. The seat belts are also
equipped with automatic seat belt
tensioners.
This system monitors the seat belts.
If you turn the ignition switch to the
ON (II) position bef ore your seat
belt is f astened, the beeper will
sound and the indicator will f lash. If
your seat belt is not f astened bef ore
the beeper stops, the indicator will
stop f lashing but remain on.If a passenger does not f asten their
seat belt, the indicator will come on
about 6 seconds af ter the ignition
switch is turned to the ON (II)
position.
If eitherthedriverorpassengerdoes
not f asten their seat belt while
driving, the beeper will sound and
the indicator will f lash again at
regular intervals.
When no one is sitting in the
passenger’s seat, or a small child is
riding there, the indicator will not
come on and the beeper will not
sound.
The seat belts use the same
monitoring system as the airbags.
The system may not work properly
under these conditions:
Placing heavy items on the
passenger’s seat.
The passenger is not sitting
properly.
Have your vehicle checked by a
dealer if the indicator comes on or
the beeper sounds when there is no
passenger or objects on the seat.
The seat belt system
includes an indicator on the
instrument panel and a beeper to
remind you and your passenger to
f asten your seat belts.
Additional Inf ormation About Your Seat Belts
Seat Belt System Components
16
——y
y
(y
y

The lap and shoulder belt goes over
your shoulder, across your chest,
and across your hips.
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckle is
latched (see page f or how to
properly position the belt).
To unlock the belt, press the red
PRESSbuttononthebuckle.Guide
the belt across your body so that it
retracts completely. Af ter exiting the
vehicle, be sure the belt is out of the
way and will not get closed in the
door.Both seat belts have an emergency
retractor. In normal driving, the
retractor lets you move f reely in your
seat while it keeps some tension on
the belt. During a collision or sudden
stop, the retractor automatically
locks the belt to help restrain your
body.
The passenger’s seat belt has an
additional locking mechanism that
must be activated to secure a
f orward-f acing child seat (see page
).
If the shoulder part of the belt is
pulled all the way out, the locking
mechanism will activate. The belt
will retract, but it will not allow the
passenger to move f reely.
To deactivate the locking
mechanism, unlatch the buckle and
let the seat belt f ully retract. To
ref asten the seat belt, pull it out only
as f ar as needed.
12
34
Additional Inf ormation About Your Seat Belts
L ap/Shoulder Belt
Driver and Passenger Saf ety
17
——y
y
(yy

For saf ety, you should check the
condition of your seat belts regularly.
The tensioners are designed to
activate primarily in f rontal collisions,
andtheyshouldactivateinany
collision severe enough to cause
airbag inflation.
However, the tensioners can be
activated during a collision in which
the f ront airbags do not deploy. In
this case, the airbags would not be
needed, but the additional restraint
could be helpf ul.
When the tensioners are activated,
the seat belts will remain tight until
they are unbuckled in the normal
manner.
For added protection, the seat belts
are equipped with automatic seat
belt tensioners. When activated, the
tensioners immediately tighten the
beltstohelpholdthedriveranda
passenger in place.
If the seat belt tensioners ever
activate, they must be replaced,
because the belts would no longer
retract properly.Pull each belt out f ully and look f or
f rays, cuts, burns, and wear. Check
that the latches work smoothly and
the belts retract easily. If a belt does
not retract easily, cleaning it may
correct the problem (see page ).
Any belt that is not in good condition
or not working properly will not
provide good protection and should
be replaced as soon as possible.
If a seat belt is worn during a crash,
it must be replaced by your dealer. A
belt that has been worn during a
crash may not provide the same level
of protection in a subsequent crash. Honda provides a lif etime warranty
on seat belts f or U.S. models. See
your
booklet f or details.
157
Honda Warranty Inf ormation
Seat Belt Maintenance
A utomatic Seat Belt T ensioners
Additional Inf ormation About Your Seat Belts
18
——y

y
(y
y

The dealer should also inspect the
anchors f or damage and replace
them if needed. If the automatic seat
belt tensioners activate during a
crash, they must be replaced.
Additional Inf ormation About Your Seat Belts
Driver and Passenger Saf ety
19
Not checking or maintaining
seat belts can result in serious
injury or death if the seat belts
do not work properly when
needed.
Check your seat belts regularly
and have any problem
corrected as soon as possible.
——y

y
(yy

A irbag System Components
Additional Inf ormation About Your Airbags
20
(1)(2)
(3) (7)
(8)
(6)
(4)
(5) (4)
(6) (9)
(1) Driver’s Airbag
(2) Passenger’s Airbag
(3) Control Unit
(4) Front Seat Belt Tensioners
(5) Driver’s Seat Position Sensor
(6) Passenger’s Weight Sensors
(7) Passenger’s Weight Sensor Unit
(8) Front Impact Sensors
(9) Passenger Airbag Off Indicator
——y

y
(yy

Emergency backup power in case
your vehicle’s electrical system is
disconnected in a crash.
A driver’s seat position sensor that
monitors the distance of the seat
f rom the airbag. If the seat is too
far forward, the airbag will inflate
with less f orce (see page ). Sensors that can detect whether a
child is in the passenger’s airbag
path and signal the control unit to
turn the airbag off (see page ).
Your airbag system includes:
Two SRS (Supplemental Restraint
System) airbags. The driver’s
airbag is stored in the center of
the steering wheel; the passenger’s
airbag is stored in the dashboard.
Both are marked ‘‘SRS AIRBAG.’’
Sensors that can detect a
moderate to severe front impact. Automatic seat belt tensioners
(see page ). An indicator on the dashboard that
alerts you that the passenger’s
airbag has been turned of f (see
page ).
Weight sensors and unit that
monitor the weight on the
passenger’s seat. These
automatically turn off the
passenger’s airbag if they detect
an inf ant or small child may be in
theseat(seepage ).
An indicator on the instrument
panel that alerts you to a possible
problem with your airbags,
sensors, or seat belt tensioners
(see page ). A sophisticated electronic system
that continually monitors and
records inf ormation about the
sensors, the control unit, the
airbag activators, the seat belt
tensioners, and driver and
passenger seat belt use when the
ignition switch is in the ON (II)
position.
24
24
18
26
24
25
Additional Inf ormation About Your Airbags
Driver and Passenger Saf ety
21
——y
y
(yy

The total time for inflation and
def lation is one-tenth of a second, so
f ast that most occupants are not
aware that the airbags deployed until
they see them lying in their laps.
Although both airbags normally
inf late within a split second of each
other, it is possible f or only one
airbag to deploy.
This can happen if the severity of a
collision is at the margin, or
threshold, that determines whether
or not the airbags will deploy. In
such cases, the seat belt will provide
suf f icient protection, and the
supplemental protection of f ered by
the airbag would be minimal.
If you ever have a moderate to
severe f rontal collision, sensors will
detect the vehicle’s rapid
deceleration.
If the rate of deceleration is high
enough, the control unit will instantly
inflate the driver’s and passenger’s
airbags, at the time and with the
f orce needed. Only the driver’s airbag will deploy if
there is no passenger in the
passenger’s seat, or if the advanced
airbag system has turned the
passenger’s airbag of f (see page ). During a f rontal crash, your seat belt
restrains your lower body and torso,
and the airbag helps protect your
head and chest.
Af ter inf lating, the airbags will
immediately def late, so they won’t
interf ere with the driver’s visibility,
or the ability to steer or operate
other controls.
24
How Your Front Airbags Work
Additional Inf ormation About Your Airbags
22
——y
y
(yy

In acrash, both stages
will ignite simultaneously to provide
the quickest and greatest protection.
In a crash, one stage will
ignite first, then the second stage
will ignite a split second later. This
provides longer airbag inf lation time
with a little less force.
After a crash, you may see what
looks like smoke. This is actually
powder f rom the airbag’s surf ace.
Although the powder is not harmf ul,
people with respiratory problems
mayexperiencesometemporary
discomf ort. If this occurs, get out of
the vehicle as soon as it is saf e to do
so.
Your airbags are dual-stage airbags.
This means they have two inflation
stages that can be ignited
sequentially or simultaneously,
depending on crash severity.
Your airbags are also dual-threshold
airbags. Airbags with this feature
have two deployment thresholds that
depend on whether or not the
occupant is wearing a seat belt.
If the occupant’s belt is
,
the airbag will deploy at a slightly
lower threshold, because the
occupant would need extra
protection.
If the occupant’s belt is , the
airbag will inf late at a slightly higher
threshold, when the airbag would be
needed to supplement the protection
provided by the seat belt.
Dual-T hreshold A irbags
Dual-Stage A irbags
more severeless severe not lat ched
latched
Additional Inf ormation About Your Airbags
Driver and Passenger Saf ety
23
——y
y
(yy

If there is a problem with the sensor,
the SRS indicator will come on, and
the airbag will inf late in the normal
manner regardless of the driver’s
seating position. The driver’s advanced airbag system
includes a seat position sensor under
the seat. If the seat is too far forward,
the airbag will inf late with less f orce,
regardless of the severity of the
impact.The passenger’s advanced airbag
system has weight sensors and unit
under the seat. If the sensors detect
an inf ant or small child may be in the
seat, the system will automatically
turn the passenger’s airbag off.
Your airbags are also advanced
airbags. The main purpose of this
feature is to help prevent airbag-
caused injuries to short drivers and
children who ride in the passenger’s
seat.
For both advanced airbags to work
properly:
Occupants must sit upright and
wear their seat belts properly.
Do not spill any liquids on or
under the seats, cover the sensors,
or put any cargo or metal objects
under the seats.
Failure to f ollow these instructions
could damage the sensors or prevent
them f rom working properly.
Advanced Airbags
Additional Inf ormation About Your Airbags
24
DRIVER’S
SEAT
POSITION
SENSOR PASSENGER’S
SEAT WEIGHT
SENSOR
——y
y
(yy

CONT INUED
The SRS indicator alerts
you to a potential problem
with your airbags or seat belt
tensioners (see page ).
When you turn the ignition switch to
the ON (II) position, this indicator
comes on brief ly then goes of f . This
tells you the system is working
properly.
If the indicator comes on at any
other time, or does not come on at all,
you should have the system checked
by your dealer. For example:
If the SRS indicator does not come
on after you turn the ignition
switch to the ON (II) position.
When the airbag is turned of f , an
indicator in the center of the
dashboard will come on indicating
passenger airbag ‘‘OFF’’ (see page
).
If there is no passenger in the f ront
seat, the airbag will be off. However,
the passenger airbag of f indicator
will not come on.
To ensure that the passenger’s
advanced front airbag system will
work properly,
This includes: Moving the f ront seat f orcibly
back against cargo on the seat or
f loor behind it. If the indicator stays on after the
engine starts.
If the indicator comes on or
flashesonandoff whileyoudrive.
Hanging heavy items on the
passenger seat, or placing heavy
items in the seat-back pocket.
18
26
Additional Inf ormation About Your Airbags
How the SRS Indicator Works
do not do anyt hing
t hat would increase or decrease t he weight on the f ront passenger’s seat.
Driver and Passenger Saf ety
25
——y
y
(yy