ECU HONDA S2000 2008 2.G Owner's Manual

Screw the sealant f iller hose onto
the tire valve. Make sure the
bottle remains upright to ensure
all of the sealant flows into the tire.Unscrew the bottle cap from the
bottle adapter.
Remove the air pump f rom the
repair kit, then screw the air pump
hose onto the bottle adapter.
Make sure the hose is secure.Route the power cord into the
vehicle, and insert the plug into
the accessory power socket.
Turn the ignition switch to the
ACCESSORY (I) position.
4. 5.
6.7.
8.
Repairing a Flat T ire
208
TIRE VALVE
BOTTLE HOSE BOTTLE CAP ADAPTER
AIR PUMP PLUG
ACCESSORY SOCKET
BOTTLE
CAP
AIR PUMP HOSE
\f—\f—y
\fy
(\fy\f
y
2008 S2000

Screw the towing hook into the
extension, and tighten it securely
using the wheel nut wrench.
4.
If Your Vehicle Gets Stuck
T aking Care of t he Unexpect ed
229
TIRE WHEEL WRENCH
To avoid damage to your vehicle, use
the towing hook f or straight, f lat
ground towing only. Do not tow at an
angle. The tow hook should not be used
to tow the vehicle onto a f lat bed. Do
not use it as a tie down.
\f—\f—y
y
(\fy\fy
2008 S2000