4. Buckle, position, and release the safety belt
as described inRear Seat Passengers on
page 39. Make sure that the shoulder
belt crosses the shoulder.
To remove and store the comfort guide, squeeze
the belt edges together so that you can take them
out of the guide. For the second row, slide the guide
onto its storage clip on the trim panel near the side
of the seatback. For the third row, slide the guide
onto its storage clip on the side of the seatback.
Make sure you remove the comfort guide from the
belt before you fold a rear seat down.
Safety Belt Extender
If the vehicle’s safety belt will fasten around you,
you should use it.
But if a safety belt is not long enough, your dealer
will order you an extender. When you go in to
order it, take the heaviest coat you will wear, so
the extender will be long enough for you. To
help avoid personal injury, do not let someone else
use it, and use it only for the seat it is made to
t. The extender has been designed for adults.
Never use it for securing child seats. To wear it,
just attach it to the regular safety belt. For
more information see the instruction sheet that
comes with the extender.
45
2. Pull the end cap
straight out from the
crossrail.
3. Peel back the rub strip from the crossrail.
4. Slide the accessory you are using into
the crossrail channel and secure it as
the accessory instructions direct.
5. Place the crossrail endcap back on and lock it
with the key.You will not be using the rub strip when using
crossrail accessories. When you remove any
crossrail accessory, be sure to reinstall the rub
strip. To do this, press the rub strip in place until it
seats into the channel of the crossrail.
Rear Seat Armrest
Your vehicle is equipped with a rear
armrest/cupholder.
To open it, pull up and then out on the tab,
located at the top center of the armrest, and pull
the armrest down.
164
