child restraint Hyundai Accent 2009 Owner's Manual - RHD (UK. Australia)

FEATURES OF YOUR HYUNDAI
1
1
Fuel Recommendations ................................................ 1-2
Running in Your New Hyundai ..................................... 1-3
Immobiliser System ...................................................... 1-3
Door Locks ................................................................... 1-5
Theft-Alarm System ...................................................... 1-8Window Glass............................................................. 1-11
Seats ........................................................................... 1-13
Seat Belts .................................................................... 1-22
Child Restraint System ................................................ 1-28
Supplemental Restraint (AIRBAG) System .................1-37
Instrument Cluster and Indicator Lights .......................1-46
Warning and Indicator Lights....................................... 1-50
Trip Computer .............................................................. 1-58
Multi-Function Light Sw itch .......................................... 1-61
Windshield Wiper/Washer Switch ................................1-63
Sunroof ........................................................................ 1-70
Mirror ........................................................................... 1-75
Bonnet Release ........................................................... 1-79
Heating and Cooling Control .......... ..............................1-89
Stereo Sound System ................................................. 1-99
Antenna ..................................................................... 1-103
Audio System ............................................................ 1-104

1FEATURES OF YOUR HYUNDAI
28
!
CHILD RESTRAINT SYSTEM
!
B220C02A-DAT To Release the Seat Belt When you want to release the seat belt, press the button in the locking buckle.
WARNING:
When fastening the outboard seatbelts or the centre seat belt, make sure they are inserted into the cor-rect buckles to obtain maximum pro- tection from the seat belt system and assure proper operation.
B210A01NF
B220D05MC
o To disconnect the metal tab (A) from the buckle (B), insert a nar- row-ended tool into the groovelocated on the buckle (B).
o Lock the metal tab (A) and the
buckle (B) immediately after fold-ing rear seatbacks up. B230A03A-DAT If the child is old enough to sit alone and the car is not equipped with a proper child or infant seat, the child should be placed in the rear seat andrestained with a lap/sash belt. Child restraint systems are designed to be secured in vehicle seats by lap beltsor the lap belt portion of a lap/shoulder belt, or by a tether anchor and/or ISOFIX anchors (If Installed).
WARNING:
o Child restraint anchorages are designed to withstand only thoseloads imposed by correctly fittedchild restraints. Under no circum- stances are they to be used for adult seat belts harnesses or forattaching other items or equip- ment to the vehicle.
o Since a safety belt or child re- straint system can become veryhot if it is left in a closed vehicle, be sure and check the seat coverand buckles before placing a child there.

1
FEATURES OF YOUR HYUNDAI
29
B230B01E-DAT Using a Child Restraint System For small children and babies, the use of a child seat or infant seat is required. This child seat or infant seat should beof appropriate size for the child and should be installed in accordance with the manufacturer's instructions. It isfurther required that the seat be placed in the vehicle's rear seat since this can make an important contribution tosafety. Your vehicle is provided with three child restraint anchorage points for installing the child seat or infantseat. Child Restraint Hook Holder Spacer
B230B01NF
Attachment Bolt (5/16"-22 mm) Conical Spring Washer Child Restraint Hook Holder
o When the child restraint systemis not in use, store it in the boot or fasten it with a safety belt so that it will not be thrown forward in
the case of a sudden stop or acci-dent.
o A child restraint system should be
placed in the vehicle's rear seatsince this can make an important contribution to safety.
o Unrestrained children should not
be carried in the car. Holding achild in your arms is not a satis- factory substitute for a child re- straint system. A child held in this manner can be crushed be-tween your body and the interior of the car.
o Never allow a child to be held in
a person's arms while they are ina moving vehicle. This could result in serious in-jury or death to the child in the event of an accident or sudden stop. Holding a child in a movingvehicle does not offer protection during an accident, even if the person holding the child is wear-ing a seat belt. o Never use an infant carrier or child
safety seat that "hooks" over aseatback; it may not provide ad- equate security in an accident.
o Under all circumstances the at- taching bolt must be engaged atleast 5 full threads in the anchor- age. If you are in doubt with anyaspect of this installation please contact an authorised Hyundai dealer.
Retainer Washer

1FEATURES OF YOUR HYUNDAI
30
!
2. Route the child restraint seat strap
over the back of the seat. For vehicles with adjustable head- rests, route the tether strap underthe headrest and between the head- rest posts, otherwise route the tether strap over the top of the seatback. B230C02MC
B230C04A-DAT Installing a Child Restraint Seat (4 Door) Three Child Restraint Anchorage Fit- ting Packages are located on the rearseat package tray.
1. Open the tether anchor cover on the
rear seat package tray.
B230C01MC
WARNING:
Do not mount more than one child restraint to a single tether or to a child restraint lower anchorage point.The improper increased load may cause the anchorage points or tether anchor to break, causing seriousinjury or death.
B230C01A-D
3. Connect the attaching clip (2) to the Child Restraint Anchorage Fitting Package (1) and tighten to secure the seat. (1)
(2)

1
FEATURES OF YOUR HYUNDAI
31
!
2. Route the child restraint seat strap
over the back of the seat. For vehicles with adjustable head- rests, route the tether strap under theheadrest and between the headrest posts, otherwise route the tether strap over the top of the seatback.
B230E01MC-DAT Installing a Child Restraint Seat (3 Door) Three Child Restraint Anchorage Fit- ting Package are located on the rearfloor panel.
B230E01MC
1. Open the tether anchor cover on the rear floor panel.
B230C02MC
WARNING:
Do not mount more than one child restraint to a single tether or to a child restraint lower anchorage point.
The improper increased load may cause the anchorage points or tether anchor to break, causing seriousinjury or death.
3. Connect the attaching clip (2) to the
Child Restraint Anchorage Fitting Package (1) through the hole on the covering shelf and tighten to securethe seat.B230E01A-D (1)
(2)
Covering shelf

1FEATURES OF YOUR HYUNDAI
32
!
Some child seat manufacturers make safety seats that are labeled as ISOFIX or ISOFIX-compatible child seats. These seats include two rigid or web-bing mounted attachments that con- nect to two ISOFIX anchors at specific seating positions in your vehicle. Thistype of child seat eliminates the need to use seat belts to attach the child seat for forward-facing child seats. WARNING:
o Do not install a child safety seat at the centre of the rear seat us- ing the vehicle's ISOFIX anchors. The ISOFIX anchors are only pro-vided for the left and right out- board rear seating positions. Do not misuse the ISOFIX anchorsby attempting to attach a child restraint seat improperly in the middle of the reat seat position tothe ISOFIX anchors. In a crash,
the child seat ISOFIX attachments may not be strong enough to se- cure the child restraint seat prop- erly in the centre of the rear seat and may break, causing serious injury or death. o When using the vehicle’s "ISOFIX"
system to install a child restraint system in the rear seat, all unused vehicle rear seat belt metal latch plates or tabs must be latchedsecurely in their seat belt buckles and the seat belt webbing must be retracted behind the child restraintto prevent the child from reaching and taking hold of unretracted seat
belts. Unlatched metal latch platesor tabs may allow the child to reach the unretracted seat belts which may result in strangulationand a serious injury or death to the child in the child restraint.
o Do not mount more than one child restraint to a single tether or to a child restraint lower anchorage
point. The improper increased load may cause the anchorage points or tether anchor to break, causing serious injury or death.
o Attach the ISOFIX or ISOFIX-com-
patible child seat only to the ap- propriate locations shown.
o Always follow the installation and
use instructions provided by the manufacturer of the child re- straint.
B230D05E-DAT
Securing the Child Restraint Seat
with the "ISOFIX" System
B230D01MC
ISOFIX anchors have been provided in your vehicle. The ISOFIX anchors arelocated in the left and right outboard rear seating positions. Their locations are shown in the illustration. There is noISOFIX anchor provided for the centre rear seating position.

1
FEATURES OF YOUR HYUNDAI
33
!WARNING:
If the child restraint seat is not an- chored properly, the risk of a childbeing seriously injured or killed in a collision greatly increases. B230F02A-DAT Installation on the Centre of the Rear Seat
Use the seat belt to install the child restraint system as illustrated. After installation of the child restraint sys- tem, rock the child seat back and forth,and side to side to ensure that it is positively secured by the seat belt. If the child seat moves, readjust thelength of the seat belt. In Australia/NZ the child restraint manufacturer's in- structions must be followed when fit-ting the unit to the vehicle.
Follow the child seat manufacturer'sinstructions to properly install safetyseats with ISOFIX or ISOFIX-compat- ible attachments. Once you have installed the ISOFIXchild restraint seat, assure that the seat is properly attached to the ISOFIX and tether anchors. Also, test the safetyseat before you place the child in it. Tilt the seat from side to side. Also try to tug the seat forward. Check to see if theanchors hold the seat in place.
B230D02MC
The ISOFIX anchors are located be- tween the seatback and the seat cush-ion of the rear seat left and right out- board seating positions. ISOFIX Anchor
B230D03MC
B230F01MC
ISOFIX Anchor Position Indicator
CAUTION:
Do not allow the rear seat belt web- bing to get scratched or pinched by the ISOFIX-seat latch and ISOFIXanchor during the installation.!

1FEATURES OF YOUR HYUNDAI
34
!
B230G02JM-DAT Installation on the Outboard of the Rear Seat To install a child restraint system on the outboard, extend the shoulder/lap belt from its retractor. Install the child re- straint system, buckle the seat beltand allow the seat belt to take up any slack. Make sure that the lap portion of the belt is tight around the child re-straint system and the shoulder por- tion of the belt is positioned so that it cannot interfere with the child's head orneck. After installation of the child re- straint system, try to move it in all directions to be sure the child restraintsystem is securely installed.
OMC039304 If you need to tighten the belt, pull more webbing toward the retractor. NOTE:
o Before installing the child re-
straint system, read the instruc- tions supplied by the child re-straint system manufacturer.
o If the seat belt does not operate
as described, have the systemchecked immediately by your authorised Hyundai dealer. WARNING:
o Do not install any child restraint system in the front passenger seat. Should an accident occur andcause the passenger's airbag to deploy, it could severely injure or kill an infant or child seated in aninfant or child seat. Therefore, only use a child restraint system in the rear seat of your vehicle.
o Before installing Child Restraint System to vehicles fitted with Cur-tain Airbags, always refer to safetynotices for Curtain Airbag sys- tems on this manual. Whenever installing child restraints, use onlyapproved devices and refer to "Child Restraint System" to en- sure correct installation and occu-pant protection is maximised.

1
FEATURES OF YOUR HYUNDAI
43
!
o Do not install any accessories or
children’s toys in the Curtain Airbag deployment zones, as this may impair the operation of the system or throw parts of them intothe vehicle cabin causing injury to occupants if the system is de- ployed.
o To maintain the integrity of the Curtain Airbag system, any work,removal or installation of theairbag and associated compo- nents (such as roof lining and side trims) should always be performedby a qualified vehicle repairer.
WARNING:
o Before installing child restraints, always refer to "Child RestraintSystem" to ensure correct instal- lation and occupant protection is maximised.
o Make sure that the occupant does
not have any body parts (head,arms & legs) protruding outside the restraining system. If an inflat- ing airbag was to strike an infantchild on the head, it may cause serious injury.
o Ensure the opening for the Cur- tain Airbag System remains unob-structed at all times, so that the airbags can inflate properly ifneeded.
Important Safety Notes for Cur- tain Airbag Systems Following is a number of safety points concerning this system which shouldalways be observed to ensure risk of injury is reduced in an accident.
o The built in coat hooks should
only be used for light weight cloth- ing, ensure that pockets are free of any heavy or sharp objects. When using coat hooks, do not hangclothes on coat hangers.
o The space between the occupant
and the curtain airbag must neverbe occupied by children, passen- gers or pets. Occupants should never lean out or have any parts oftheir body protruding from the window whilst the engine is run- ning.
o Do not move the sun visor out to cover the side window if there isan item attached to it such asgarage door remote control, pens, air fresheners or the like. These objects may cause injury if theCurtain Airbag is deployed.
o Where sun blinds are fitted to the
rear doors, these must not ob-struct or impair the airbag in any way.

1FEATURES OF YOUR HYUNDAI
44
o Modification to SRS components
or wiring, including the addition of any kind of badges to the pad covers or modifications to the body structure, can adversely affect SRSperformance and lead to possible injury.
o For cleaning the airbag pad cov- ers, use only a soft, dry cloth orone which has been moistened with plain water. Solvents or clean-ers could adversely affect the airbag covers and proper deploy- ment of the system.
o No objects should be placed over or near the airbag modules on thesteering wheel, instrument panel,and the front passenger's panel above the glove box, because any such object could cause harm ifthe vehicle is in a crash severe enough to cause the airbags to inflate.
o If the airbags inflate, they must be replaced by an authorised Hyundaidealer.
!
B240C01HP
WARNING:
o Extreme Hazard! Do not use a rear- ward facing child restraint on a seat protected by an airbag in front of it!
o Do not install a child restraint sys- tem in the front passenger seatposition. A child restraint system mustnever be placed in the front seat. The infant or baby could be se- verely injured by an airbag de-ployment in case of an accident.
B240C02NF-DAT SRS Care The SRS is virtually maintenance-free and so there are no parts you can safelyservice by yourself. If the SRS SRI (Service Reminder Indicator) does not come on, or continuously remains on,have your vehicle immediately in- spected by your authorised Hyundai dealer. Any work on the SRS system, such as removing, installing, repairing, or anywork on the steering wheel must be performed by a qualified Hyundai tech- nician. Improper handling of the SRSsystem may result in serious personal injury.