lumbar support Hyundai Elantra 2017 Owner's Manual - RHD (UK. Australia)

2-4
SSEEAATTSS
Safety system of your vehicle
OAD035068R
Front seat
(1) Forward and rearward
(2) Seatback angle
(3) Seat cushion height (Front seat)*
(4) Lumbar support (Driver’s seat)*
(5) Seat warmer or Air ventilation seat *
(6) Headrest
Rear seat
(7) Armrest
(8) Seatback angle and folding*
(9) Headrest
* : if equipped
Power seat
Manual seat

2-11
Safety system of your vehicle
2
Seat belts must be snug against your
hips and chest to work properly.
When the seatback is reclined, the
shoulder belt cannot do its job
because it will not be snug against
your chest. Instead, it will be in front
of you. During an accident, you could
be thrown into the seat belt, causing
neck or other injuries.
The more the seatback is reclined,
the greater chance the passenger’s
hips will slide under the lap belt or
the passenger’s neck will strike the
shoulder belt.Seat cushion height
To c h a n g e t h e h e i g h t o f t h e s e a t
cushion:
1. Pull the front portion of the control
switch up to raise or push down to
lower the front part of the seat
cushion.
Pull the rear portion of the control
switch up to raise or push down to
lower the height of the seat cush-
ion.
2. Release the switch once the seat
reaches the desired position.
Lumbar support
•The lumbar support can be adjust-
ed by pressing the lumbar support
switch.
•Press the front portion of the
switch (1) to increase suppor t or
the rear portion of the switch (2) to
decrease support.
The lumbar support does not operate
up or down when the lumbar support
is in the rearmost position.
In this case, to use the system, slight-
ly increase support by pushing the
front portion of the switch (1).
OAD035007/HOAD035008R