display HYUNDAI ELANTRA N 2022 Service Manual

05
5-75
Welcome System (if equipped)
Welcome light
OCN7N051054NOCN7N051054N
Door handle lamp (if equipped)
When all the doors (and trunk) are closed
and lock
ed, the door handle lamp will
come on for about 15 seconds if any of
the below is performed.
• When the door unlock button is pressed on the smart key.
• When the button of the outside door handle is pressed.
• When the vehicle is approached with the smart key in possession.
Headlamp and parking lamp
When the headlamp (lamp switch in the
headlamp or A
UTO position) is on and all
doors (and trunk) are locked and closed,
the headlamp and parking lamp will
come on for 15 seconds if/or any of the
below is performed.
• When the door unlock button is pressed on the smart key.
At this time, if you press the door lock or
unlock button, the headlamp and parking
lamp will turn off immediately. You can activate or deactivate the
Welcome Light from the User Settings
Mode on the LCD display. For more
details, refer to “LCD Display” in
chapter 4. If your vehicle is equipped
with additional navigation, please refer
to the infotainment system manual
separately supplied.
Interior lamp
When the interior lamp switch is in the
DOOR position and all doors (and trunk)
are closed and locked, the room lamp
will come on for 30 seconds if any of the
below is performed.
• When the door unlock button is
pressed on the smart key.
• When the button of the outside door handle is pressed.
At this time, if you press the door lock or
unlock button, the room lamp will turn
off immediately.
CN7 N HMA 5.indd 5-75 2021-09-06  3:06:36

05
5-95
OCN7050117OCN7050117
Adjusting the driver and passenger side
temperature equally
• Press the “SYNC” button to adjust the driv
er and passenger side
temperature equally.
• The passenger side temperature will be set to the same temperature as the
driver side temperature.
• Turn the driver side temperature control knob. The driver and
passenger side temperature will be
adjusted equally.
• If you rotate the passenger’s temperature control knob, the SYNC
button is off and the passenger
side temperature can be operated
individually.
Adjusting the driver and passenger side
temperatur
e individually
Press the “SYNC” button again to
adjus
t the driver and passenger side
temperature individually. The button
indicator will turn off. Temperature conversion
If the battery has been discharged or
disconnect

ed, the temperature mode
display will reset to Centigrade.
To change the temperature unit from °C
to °F or °F to °C :

- Automatic climate control system
Press the AUTO button for 3 seconds
while pressing the OFF button.

- Instrument clusterAutomatic climate
control system
Go to User Settings → Other →
Temperature Unit.
The temperature unit on both the
cluster LCD display and the climate
control screen will change.
Air intake control
Recirculated air position
With the recirculated air
position selected, air from the
passenger compartment will
be drawn through the heating
system and heated or cooled
according to the function
selected.
Outside (fresh) air position
With the outside (fresh) air
position selected, air enters
the vehicle from outside and
is heated or cooled according
to the function selected.
CN7 N HMA 5.indd 5-95 2021-09-06  3:06:44

05
5-111
To charge a cellular phone
The wireless cellular phone charging
system charges only the Qi-enabled
cellular phones (
). Read the label on
the cellular phone accessory cover or
visit your cellular phone manufacturer’s
website to check whether your cellular
phone supports the Qi technology.
The wireless charging process starts
when you put a Qi-enabled cellular
phone on the wireless charging unit.
1. Remove other items, including the smart key, from the wireless charging
unit. If not, the wireless charging
process may be interrupted. Place the
cellular phone on the center of the
charging pad.
2. When charging starts, a charging icon is displayed on the infotainment
system screen. However, depending
on the infotainment system screen,
the wireless charging icon may not be
displayed. See the infotainment web
manual for details.
3. You can turn ON or OFF the wireless charging function in the user settings
mode on the instrument cluster. For
further information, refer to the “LCD
Display Modes” in this chapter.
The system warns you with a message
on the LCD display if the cellular phone
is still on the wireless charging unit after
the engine is turned OFF and the front
door is opened.
Information
For some manufacturers’ cellular phones,
the system may not warn you even though
the cellular phone is left on the wireless
charging unit. This is due to the particular
characteristic of the cellular phone and
not a malfunction of the wireless charging.
NOTICE
• The wireless cellular phone charging system may not support certain
cellular phones, which are not
verified for the Qi specification (
).
• When placing your cellular phone on the charging mat, position the
phone in the middle of the mat for
optimal charging performance. If
your cellular phone is off to the side,
the charging rate may be less and in
some cases the cellular phone may
experience higher heat conduction.
• In some cases, the wireless charging may stop temporarily when the
Smart Key is used, either when
starting the vehicle or locking/
unlocking the doors, etc.
• The wireless charging process may temporarily stop, when temperature
abnormally increases inside the
wireless cellular phone charging
system. Stop the charging cellular
phone and wait until temperature
falls to a certain level.
• The wireless charging process may temporarily stop when there is
any metallic item, such as a coin,
between the wireless cellular phone
charging system and the cellular
phone.
CN7 N HMA 5.indd 5-111 2021-09-06  3:06:50

6
6. Driving Your Vehicle
Before Driving ........................................................................\
........................6-4Before Entering the Vehicle ........................................................................\
............. 6-4
Before Starting ........................................................................\
................................. 6-4
Engine Start/Stop Button ........................................................................\
..... 6-5
Vehicle Auto-Shut Off ........................................................................\
.......... 6-11
Operating Conditions ........................................................................\
..................... 6-11
Deactivating Conditions ........................................................................\
................ 6-11
System Operation ........................................................................\
............................ 6-11
Manual Transmission ........................................................................\
............6-12Manual Transmission Operation ........................................................................\
..... 6-12
Good Driving Practices ........................................................................\
...................6-14
Rev Matching ........................................................................\
................................... 6-15
Dual Clutch Transmission ........................................................................\
.... 6-18Dual Clutch Transmission Operation .....................................................................6-18
LCD Display for Transmission Temperature and Warning Message ................... 6-20
Parking .................................................................\
................................................... 6-26
Paddle Shifter (Manual Shift Mode) ..................................................................... 6-26
Good Driving Practices ........................................................................\
.................. 6-27
Brake System ........................................................................\
........................ 6-28Power Brakes ........................................................................\
.................................. 6-28
Disc Brakes Wear Indicator......................................................................\
.............. 6-28
High Performance Brake.......................................................................\
................. 6-29
Parking Brake ........................................................................\
.................................. 6-29
Anti-lock Brake System (ABS) ......................................................................6-31Electronic Stability Control (ESC) ........................................................................\
. 6-32
Vehicle Stability Management (VSM) ................................................................... 6-37
Hill-Start Assist Control (HAC) ........................................................................\
...... 6-38
Good Braking Practices ................................................................\
......................... 6-39
Electronic Control Suspension (ECS) ........................................................ 6-40
Electronic Limited Slip Differential ............................................................. 6-41
Warning messages ........................................................................\
......................... 6-42
N Button ........................................................................\
...............................6-43N1/N2 Button Settings ........................................................................\
................... 6-43
CN7 N HMA 6.indd 6-1 2021-09-14  9:42:13

Driving Your Vehicle6-4
Before Entering the Vehicle
• Be sure all windows, outside mirror(s), and outside lights are clean and
unobstructed.
• Remove frost, snow, or ice.
• Visually check the tires for uneven wear and damage.
• Check under the vehicle for any sign of leaks.
• Be sure there are no obstacles behind you if you intend to back up.
Before Starting
• Make sure the hood, the trunk, and the doors are securely closed and
locked.
• Adjust the position of the seat and steering wheel.
• Adjust the inside and side view mirrors.
• Verify all the lights work.
• Fasten your seatbelt. Check that all passengers have fastened their
seatbelts.
• Check the gauges and indicators in the instrument panel and the
messages on the instrument display
when the Engine Start/Stop button is
in the ON position.
• Check that any items you are carrying are stored properly or fastened down
securely.
WARNING
To reduce the risk of SERIOUS INJURY or
DEATH, take the following precautions:
• ALWAYS wear your seat belt. All
passengers must be properly belted
whenever the vehicle is moving.
For more information, refer to "Seat
Belts" in chapter 3.
• Always drive defensively. Assume
other drivers or pedestrians may be
careless and make mistakes.
• Stay focused on the task of driving.
Driver distraction can cause
accidents.
• Leave plenty of space between you
and the vehicle in front of you.
WARNING
NEVER drink alcohol or take drugs and
drive.
Drinking alcohol or taking drugs and
driving is dangerous and may result in
an accident and SERIOUS INJURY or
DEATH.
Drunk driving is the number one
contributor to the highway death
toll each year. Even a small amount
of alcohol will affect your reflexes,
perceptions and judgment. Just
one drink can reduce your ability to
respond to changing conditions and
emergencies and your reaction time
gets worse with each additional drink.
Driving while under the influence
of drugs is as dangerous or more
dangerous than driving under the
influence of alcohol.
You are much more likely to have a
serious accident if you drink or take
drugs and drive. If you are drinking or
taking drugs, don't drive. Do not ride
with a driver who has been drinking
or taking drugs. Choose a designated
driver or call a taxi.
BEFORE DRIVING
CN7 N HMA 6.indd 6-4 2021-09-14  9:42:19

06
6-15
Rev Matching
The Rev Matching system automatically
helps synchronize engine rpm with the
optimal speed of the gearabout to be
engaged which reduces the impact of
clutch connection and improves gear
shift response.
Information
• Fully depress the clutch pedal. Without
the clutch pedal fully depressed, the
system may not respond correctly.
• The system does not operate when
backing up.
• Rev Matching controls the engine speed
up to the rev limit, but the function
cannot prevent over-revving caused by
shifting mistake.
Rev Matching activation
OCN7N071148LOCN7N071148L
1. Press REV button (ON/OFF)
• Press the REV button to turn on the
system. A message appears "Rev
Matching On" with a REV indicator on
the cluster LCD display.
• Press the REV button again to turn off the system. A message appears "Rev
Matching Off" and the REV indicator
disappears.
2. Select Drive Mode.
REV indicatorREV indicator
OCN7N061257NOCN7N061257N
DRIVE MODE buttonDRIVE MODE button
OCN7N061218OCN7N061218
CN7 N HMA 6.indd 6-15 2021-09-14  9:42:21

Driving Your Vehicle6-20
• For smooth launch uphill, press down the accelerator pedal smoothly
depending on the current conditions.
• If you release your foot from the accelerator pedal at low vehicle
speed, you may feel strong engine
brake, which is similar to manual
transmission.
• When driving downhill, you may use Manual Mode to downshift to a
lower gear in order to control your
speed without using the brake pedal
excessively.
• When you turn the engine on and off, you may hear clicking sounds as the
system goes through a self test. This
is a normal sound for the Dual clutch
transmission.
WARNING
Due to transmission failure, you may
not continue to drive and the position
indicator (D, R) on the cluster will blink.
We recommend you to contact an
authorized HYUNDAI dealer and have
the system checked.
LCD Display for Transmission
Temperature and Warning
Message
Transmission temperature gauge
OCN7N061225LOCN7N061225L
• Select trip computer mode on the LCD display and move to the
transmission temperature screen to
see the temperature of the dual clutch
transmission.
• Try to drive so that the temperature gauge do not show high/overheat.
When the transmission is overheated,
the warning message will display
on the LCD. Follow the displayed
message.
• The transmission temperature is displayed in three colors (white,
orange and red) as it increases. (if
equipped with the cluster type B)
• Orange temperature gauge is displayed right before the warning
message appears on the LCD display.
(if equipped)
CAUTION
• Increase (high temperature) of the
transmission temperature gauge
usually appears on an incline when
the vehicle is stopped for a long time
using accelerator pedal, without
depressing the brake pedal.
• To maintain the optimal transmission
performance, drive so that the white
gauge is not exceeded. (if equipped)
CN7 N HMA 6.indd 6-20 2021-09-14  9:42:23

06
6-21
DCT warning messages
OCN7N061226LOCN7N061226L
This warning message is displayed when
vehicle is driven slowly on a grade and
the vehicle detects that the brake pedal
is not applied.
Steep grade
Driving up hills or on steep grades:
•
To hold the vehicle on an incline use
the foot brake or the parking brake.
• When in stop-and-go traffic on an incline, keep some distance ahead
before moving the vehicle forward.
Then hold the vehicle on the incline
with the foot brake.
• If the vehicle is held on a hill by applying the accelerator pedal
or by creeping with brake pedal
disengaged, the clutch and
transmission may overheat which
can result in damage. At this time, a
warning message will appear on the
LCD display.
• If the LCD warning is active, the foot brake must be applied.
• Ignoring the warnings can lead to damage to the transmission.
OCN7N061227NOCN7N061227N
Transmission high temperature
• Under certain conditions, such as r
epeated stop-and-go launches
on steep grades, sudden take off
or acceleration, or other harsh
driving conditions, the transmission
clutch temperatures will increase
excessively. Finally the clutch in
transmission could be overheated.
• When the clutch is overheated, the safe protection mode engages and
the gear position indicator on the
cluster blinks with a chime. At this
time, “Transmission temperature is
high! Stop safely” warning message
will appear on the LCD display and
driving may not be smooth.
CN7 N HMA 6.indd 6-21 2021-09-14  9:42:23

Driving Your Vehicle6-22
• If this occurs, pull over to a safe location, stop the vehicle with the
engine running, apply the brakes and
shift the vehicle to P (Park), and allow
the transmission to cool.
• If you ignore this warning, the driving condition may become worse.
You may experience abrupt shifts,
frequent shifts, or jerkiness. To return
to the normal driving condition, stop
the vehicle and apply the foot brake
or shift into P (Park). Then allow the
transmission to cool for a few minutes
with engine on, before driving off.
• When possible, drive the vehicle smoothly.
OCN7N061225LOCN7N061225LOCN7N061228LOCN7N061228L
OCN7N061229L OCN7N061229L
Transmission overheated
• If the vehicle continues to be driven and the clut
ch temperatures reach
the maximum temperature limit, the
"Transmission hot! Park with engine
On" warning will be displayed. When
this occurs the clutch is disabled
until the clutch cools to normal
temperatures.
• The warning will display a time to wait for the transmission to cool.
• If this occurs, pull over to a safe location, stop the vehicle with the
engine running, apply the brakes and
shift the vehicle to P (Park), and allow
the transmission to cool.
• When the message "Transmission cooled down. Resume driving"
appears you can continue to drive
your vehicle.
• When possible, drive the vehicle smoothly.
If any of the warning messages in the
LCD display continue to blink, for your
safety, contact an authorized HYUNDAI
dealer and have the system checked.
CN7 N HMA 6.indd 6-22 2021-09-14  9:42:24

06
6-23
Transmission ranges
The indicator in the instrument cluster
displays the shift lever position when the
Engine Start/Stop button is in the ON
position.
P (Park)
Always come to a complete stop before
shifting in
to P (Park).
To shift from P (Park), you must depress
firmly on the brake pedal and make sure
your foot is off the accelerator pedal.
If you have done all of the above and
still cannot shift the lever out of P
(Park), see "Shift-Lock Release" in this
chapter.
The shift lever must be in P (Park) before
turning the engine off.
WARNING
• Shifting into P (Park) while the
vehicle is in motion may cause you to
lose control of the vehicle.
• After the vehicle has stopped, always
make sure the shift lever is in P
(Park), apply the parking brake, and
turn the engine off.
• Do not use the P (Park) position in
place of the parking brake.
R (Reverse)
Use this position to drive the vehicle
backw

ard.
NOTICE
Always come to a complete stop before
shifting into or out of R (Reverse); you
may damage the transaxle if you shift
into R (Reverse) while the vehicle is in
motion.
N (Neutral)
The wheels and transaxle are not
engaged.
U

se N (Neutral) if you need to restart a
stalled engine, or if it is necessary to stop
with the engine ON. Shift into P (Park)
if you need to leave your vehicle for any
reason.
Always depress the brake pedal when
you are shifting from N (Neutral) to
another gear.
CN7 N HMA 6.indd 6-23 2021-09-14  9:42:24