seats Hyundai Equus 2016 Digital Navigation System
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2016, Model line: Equus, Model: Hyundai Equus 2016Pages: 261, PDF Size: 7.39 MB
Page 131 of 261
AUX
AUX l 2-93
Starting Mode
Press the HOME key Ü Select the AUX
icon.
i Information
!Ÿ If an external device connector is con-
nected with the AUX terminal, then AUX
mode will automatically operate. Once the
connector is disconnected, the previous
mode will be restored.
!Ÿ AUX mode can be used only when an
external audio/video player (camcorder,
car VCR, etc.) has been connected.
!Ÿ The AUX volume can be controlled sepa-
rately from other AV modes.
NOTICE
!Ÿ Connecting a connector jack to the AUX
terminal without an external device will
convert the system to AUX mode, but only
output noise. When an external device is
not being used, also remove the connec-
tor jack.
!Ÿ When the external device power is con-
nected to the power jack, playing the
external device may output noise. In such
cases, disconnect the power connection
before use.
External AUDIO and VIDEO players
(Camcorders, car VCR, etc.) can be played
through a dedicated cable. The position of
the AUX jack is at the top of the gear box
located between the driver and passenger
seats.
NOTICE
!Ÿ This device supports the NTSC color
system. Other color systems are not sup-
ported.
AUX
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E
Page 220 of 261
INFO/Setup
6-14
i Information
!Ÿ This product requires regular updates for
software corrections, new functions and
map updates. Updating may require up to
1 hour depending on the data size.
!Ÿ Update files can be downloaded from the
designated website(www.hyundaiusa.com)
and updated through the USB memory.
CAUTION
!Ÿ Turning off the power or ejecting the USB
memory dur
ing the update process may
result in data loss. Make sure to keep the
ignition on and wait until updating is com-
plete.
Sound Settings
In the INFO/Setup Home screen Ü
Select the Sound Settings icon.
Fader/Balance
Select the Fader/Balance button.
Turn the controller left/right to move the
cursor on the control screen to the desired
position.
Press the controller to select Fader or
Balance adjustment mode.
Press and hold the controller for approx
3 seconds to restore sound to the center
position.
i Information
!Ÿ The Fader/Balance settings allow the
position of the sound to be set. For exam-
ple, the sound can be set towards the
driver seat so that the volume is relatively
lower in the passenger seat or back seats.
Tr e b l e / M i d d l e / B a s s
Select the Treble/Middle/Bass button.
Turn the controller left/right to adjust the
bass/middle/treble settings.
Press and hold the controller for approx 3
seconds to restore all the settings back to 0.
) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E ) @ 7 * @ŠÙ < 6 4 " @ / > 1 B S U J O E E