reset HYUNDAI I20 2017 User Guide

)')
#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3
IInformation
The average fuel economy is not dis-
played for more accurate calculation
if the vehicle does not drive more than
10 seconds or 300 meters (0.19 miles)
since the ignition switch or the Engine
Start/Stop button is turned to ON.Instant Fuel Economy (3)• This mode displays the instant fuel
economy during the last few sec-
onds when the vehicle speed is
more than 10 km/h (6.2 MPH).
- Fuel economy range:0 ~ 30 L/100km, km/L
Tripmeter A/B (km or mile, km/h or MPH)Tripmeter (1)• The tripmeter is the total driving
distance since the last tripmeter
reset.
- Distance range: 0.0 ~ 9999.9 km or mi.
• To reset the tripmeter, press the [OK] button (or RESET button) on
the steering wheel for more than 1
second when the tripmeter is dis-
played.
Average Vehicle Speed (2)• The average vehicle speed is cal-culated by the total driving dis-
tance and driving time since the
last average vehicle speed reset.
- Speed range:0~220 km/h or 0~140 mph
• To reset the average vehicle speed, press the [OK] button (or RESET
button) on the steering wheel for
more than 1 second when the aver-
age vehicle speed is displayed.
Information
The average vehicle speed is not dis-played if the driving distance is less
than 300 meters (0.19 miles) or the
driving time is less than 10 seconds
since the ignition switch or the Engine
Start/Stop button is turned to ON.
Even if the vehicle is not in motion, the average vehicle speed keeps cal-
culating while the engine is running.i
i
OIB044119

Elapsed Time (3)• The elapsed time is the total driv-ing time since the last elapsed time
reset.
- Time range (hh:mm): 00:00 ~ 99:59
• To reset the elapsed time, press the [OK] button (or RESET button)
on the steering wheel for more
than 1 second when the elapsed
time is displayed.
IInformation
Even if the vehicle is not in motion, the
elapsed time keeps calculating while
the engine is running.
Digital Speedometer This message shows the speed of
the vehicle (km/h, MPH).
Driving info display
(if equipped)This display shows trip distance (1),
average fuel economy (2) and the
vehicle can be driven with the
remaining fuel (3).
This information is displayed for a few
seconds when you turn off the engine
and then goes off automatically.
The information provided is calculat-
ed according to each trip.
If the estimated distance is below
1km (1 mi.), the distance to empty
(3) will display as "---" and a refuel
message will appear (4).
i)'#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3
OIB044125
OIB044162

CCluster Type C The trip computer is a microcomput-
er-controlled driver information sys-
tem that displays information related
to driving.
Information
Some driving information stored in the
trip computer (for example Average
Vehicle Speed) resets if the battery is
disconnected.
Trip modes
To change the trip mode, toggle the
“ , ” switch on the steering wheel.
i
)'
#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3
OIB044157
• Tripmeter
• Average F uel Economy
• Elapsed Time
Drive Info
• Tripmeter
• Average F uel Economy
• Elapsed Time
Accumulated Info
• Average Fuel Economy
• Instant Fuel Economy
Fuel Economy
Digital Speedometer

FFuel economy Distance To Empty (1)• The distance to empty is the esti-
mated distance the vehicle can be
driven with the remaining fuel.
- Distance range: 1 ~ 9999 km or 1 ~ 9999 mi.
• If the estimated distance is below 1 km (1 mi.), the trip computer will
display "----" as distance to empty.
Information
If the vehicle is not on level groundor the battery power has been inter-
rupted, the distance to empty func-
tion may not operate correctly.
The distance to empty may differ from the actual driving distance as
it is an estimate of the available
driving distance.
The trip computer may not register additional fuel if less than 6 liters
(1.6 gallon) of fuel are added to the
vehicle.
The fuel economy and distance to empty may vary significantly based
on driving conditions, driving habits,
and condition of the vehicle.
Average Fuel Economy (2)• The average fuel economy is calcu-lated by the total driving distance
and fuel consumption since the last
average fuel economy reset.
- Fuel economy range: 0.0 ~ 99.9 L/100km, km/L or MPG
• The average fuel economy can be reset both manually and automati-
cally.Manual resetTo clear the average fuel economy
manually, press the [OK] button on
the steering wheel for more than 1
second when the average fuel econo-
my is displayed.Automatic resetTo automatically reset the average fuel
economy after refueling, select the
"Auto Reset" mode in User Settings
menu on the LCD display.
- After Ignition: The average fuel econ-omy will reset automatically whenev-
er it has passed 4 hours after turning
OFF the engine.
i
)'#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3
OHCR046134

- After Refueling: The average fueleconomy will reset automatically
when driving speed exceeds 1 km/h,
after adding 6 liters (1.6 gallons) of
fuel or more.
IInformation
The average fuel economy may be
inaccurate, when the vehicle drives
shorter than 300 meters (0.19 miles)
after turning ON the Engine Start/Stop
button.Instant Fuel Economy (3)• This mode displays the instanta-
neous fuel economy while driving
when the vehicle speed is greater
than 10 km/h (6.2 mph).
- Fuel economy range: 0~30 L/100km, km/L or 0~50 MPG
Accumulated Info display This display shows the accumulated
trip distance (1), the average fuel
economy (2), and the total driving
time (3).
The information is calculated starting
from the last reset.
To manually reset the information,
press and hold the OK button when
viewing the Accumulated driving info.
The trip distance, the average fuel
economy, and total driving time will
reset simultaneously. The accumulated driving information
will continue to be counted while the
engine is still running (for example,
when the vehicle is in traffic or
stopped at a stop light.)
Information
The vehicle must be driven for a min-
imum of 300 meters (0.19 miles) since
the last ignition key cycle before the
average fuel economy will be recalcu-
lated.i
i
)'
#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3
OHCR046135

DDriving Info displayThis display shows the trip distance
(1), the average fuel economy (2),
and the total driving time (3).
The information is calculated for each
ignition cycle. The driving information
data gets initialized, when it has
passed 4 hours after turning OFF the
engine. In other words, the last driv-
ing information is available 4 hours
after you have turned on the engine. To manually reset the information,
press and hold the OK button when
viewing the Driving info. The trip dis-
tance, the average fuel economy, and
total driving time will reset simultane-
ously.
The driving information will continue
to be counted while the engine is still
running (for example, when the vehi-
cle is in traffic or stopped at a stop
light.)
Information
The vehicle must be driven for a min-
imum of 300 meters (0.19 miles) since
the last ignition key cycle before the
average fuel economy will be recalcu-
lated.
Digital speedometer This message shows the speed of
the vehicle (km/h, MPH).
i
)'#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3
OHCR046137
OHCR046136

)' 
#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3
''#)+*'&*+$)"*+(Clock (if equipped)To set the time:
The ignition switch must be in the
ACC position or the ON position.
1. Press the SETUP CLOCK button.
2. Select "Clock" →"Clock Settings"
by using the TUNE knob.
3. Set the clock by using the TUNE knob.
Digital clock (if equipped)
Whenever the battery terminals or
related fuses are disconnected, you
must reset the time.
When the ignition switch is in the
ACC or ON position, the clock but-
tons operate as follows:Press the "H" button to advance the
time displayed by one hour.Press the "M" button to advance the
time displayed by one minute.To change the 12 hour format to the
24 hour format, press the "H" and
"M" button simultaneously for more
than 4 seconds.
For example, if the "H" and "M" but-
ton is pressed when the time is 10:15
p.m., the display will change to 22:15
Do not adjust the clock while driv-
ing. You may lose your steering
control and cause severe personal
injury or accidents.
WARNING
OIB044038
Do not adjust the clock while driv-
ing. You may lose your steering
control and cause severe personal
injury or accidents.
WARNING

SSteering wheel audio control
(if equipped)The steering wheel audio control but-
ton is installed to promote safe driving.
Do not operate audio remote control
buttons simultaneously.VOLUME (VOL +/-) (1)• Press the up button (+) to increase volume.
• Press the down button (-) to decrease volume.SEEK/PRESET ( / ) (2)If the SEEK/PRESET button is
pressed for 0.8 second or more, it
will work as follows in each mode.RADIO modeIt will function as the AUTO SEEK
select button. It will SEEK until next
channel is reached.MEDIA modeIt will function as the FF/REW button. If the SEEK/PRESET button is
pressed for less than 0.8 second, it
will work as follows in each mode.
RADIO modeIt will function as the PRESET STA-
TION select buttons.MEDIA modeIt will function as the TRACK
UP/DOWN button.MODE (3)Press the MODE button to toggle
between available Media sources
like Radio, USB, iPod, BT Audio,
AUX(Auxiliary).MUTE (4, if equipped)• Press the button to mute the
sound.
• Press the button again to activate the sound.
Detailed information for audio control
buttons is included in the following
pages in this chapter.
NOTICE
!'%$&%" '&$#
OIB047037OIB047168
■ Type A
■ Type B

#!'%$&%" '&$
(6) S
S
EEK/TRACK
• When pressed quickly
- Radio mode: Searches broadcastfrequencies saved to Presets.
- Media mode: Changes track, file or title. (except AUX)
• When pressed and held (more than 1.0 second)
- Radio mode: Frequency is con-trolled by 1 step quickly. When
the button is released after
pressing and holding, searches
broadcast frequencies.
- Media mode: Rewinds or fast-for- wards the song. (except BT
Audio*, AUX)
* if equipped
• Do not stare at the screen while driving. Staring at the screen for
prolonged periods of time could
lea d to traffic accidents.
• Do not disassemble, assemble, or modify the audio system.
Such acts could result in acci-
dents, fire, or electric shock.
• Using the phone while driving may lead to a lack of attentio n of
traffic conditions and increase
the likelihood of accidents. Use
the phone feature after parking
the vehicle.
• Heed caution not to spill water or introduce foreign objects into
the device. Such acts could lead
to smoke, fire, or product mal-
function.
(Continued)
WARNING
(Continued)
• Please refrain from use if the screen is blank or no sound can
be heard as these signs may
i ndicate product malfunction.
Continued use in such condi-
tions could lead to accidents
(fires, electric shock) or product
malfunctions.
• Do not touch the antenna during thunder or lightening as such
acts may lead to lightning
induced electric shock.
• Do not stop or park in parking- restricted areas to operate the
product. Such acts could lead to
traffic accidents.
• Use the system with the vehicle ignition turned o n. Prolonged
use with the ignition turned off
could result in battery discharge.

##!'%$&%" '&$
(( Continued)
• In case of product malfunction, please contact your place of pur-
chase or After Service ce nter.
• Placing the audio system within an electromagnetic environment may
result in noise interference.
• Prevent caustic solutions such as perfume and cosmetic oil from
contacting the dashboard because
they ma y cause damage or discol-
oration.
RadioRadio ModeChange Mode:
[RADIO
]button
• You can toggle between the radio modes using
[RADIO]
button.
• If
[SETUP/CLOCK]
 [Display] 
[Mode Popup] is turned [Off], then
each time you press the
[RADIO]
button, you can toggle between
radio modes (FM1 ➟ FM2 ➟AM ➟
DRM ➟FM1).
• The radio mode popup will not be displayed when
[SETUP/CLOCK]
button [Display] [Mode popup]
is turned [Off].
Search Frequency:
[SEEK/TRACK]
button• Searches the previous/next broad- cast frequencies.
- Short press of button: searchesthe previous/next available
broadcast frequency.
- Long press of button: Frequency is controlled by 1 step quickly.
When the button is released after
pressing and holding, searches
the previous/next available
broadcast frequency.Change Frequency:
TUNE
knob
Changes frequency by turning the
knob left/right. You can seek avail-
able frequencies manually.Saved Frequency:
[1] ~ [6]
(Preset)
buttons
• Pressing the button: Plays the fre-
quency saved in the corresponding
button.
• Pressing and holding the button (more than 1.0 second): Saves the
currently playing broadcast to the
selected button and sound a BEEP.