ECO mode HYUNDAI I20 2017 Owner's Manual

#
!'%$&%" '&$
(Continued)
• Charging through the USB may notwork for some mobile devices.
• The device may not support normal operation when using an atypical
USB memory device (miniature,
keychain, etc.). For best results, use
a typical USB device that has a
metal case.
• The device may not support normal operation when using formats such
as HDD Type, CF, or SD Memory.
• The device will not support files locked by DRM (Digital Rights
Management.).
• USB memory sticks used by con- necting an Adaptor (SD Type or CF
Type) may not be properly recog-
nized.
• The device may not operate proper- ly when using USB HDDs or USBs
subject to connection failures
caused by vehicle vibrations. (e.g. i-
stick type)
(Continued)(Continued)
• Avoid use of USB
memory products that
can also be used as key
chains or mobile phone
accessories. Use of such
products may cause damage to the
USB jack.
• Connecting an MP3 device or phone through various channels, such as
AUX/BT or Audio/USB mode may
result in pop noises or abnormal
operation.
• Use USB 2.0 devices for better com- patibility. Maximum device size
supported is 32 GB.
II nformation- Using the iPod
®
• iPod
®
is a registered trademark of
Apple Inc.
• In order to use the iPod
®
with your
vehicle’s audio system, you must use
a dedicated iPod
®
cable. (the cable
that is supplied when purchasing
iPod
®/iPhone
®
products)
• If the iPod
®is connected to the vehi-
cle while it is playing, a high pitch
sound could occur for approximate-
ly 1-2 seconds immediately after
connecting. If possible, connect the
iPod
®
to the vehicle with the iPod
®
stopped/paused.
• When the vehicle ignition is set to ACC or ON, connecting the iPod
®
through the iPod
®
cable will charge
the iPod
®through the car audio sys-
tem.
• When connecting with the iPod
®
cable, make sure to fully insert the
jack to prevent communication
interference. (Continued)i

#!'%$&%" '&$
(Continued)
• When the Equalizer features of an
external device, such as the iPod
®,
and the audio system are both
active, Equalizer effects could over-
lap and cause sound deterioration
and distortion. Whenever possible,
turn off the Equalizer feature with-
in the external device when it is con-
nected to the audio system.
• Noise may occur when an iPod
®
or
AUX device is connected. When
such devices are not being used, dis-
connect the device for storage.
• When the iPod
®
or AUX device
power is connected to the power
jack, playing the external device
may result in noise. In such cases,
disconnect the power connection before use.
• Skipping or improper operation may occur depending on the charac-
teristics of your iPod
®/iPhone
®
device.
(Continued)(Continued)
• If your iPhone
®is connected to both
the Bluetooth
®
and USB, the sound
may not be properly played. In your
iPhone
®, select the Dock connector
or Bluetooth
®
to change the sound
output (source).
• iPod
®
mode cannot be operated
when the iPod
®
cannot be recog-
nized due to the playing of versions
that do not support communication
protocols, cases of iPod
®abnormali-
ties and defects.
• For fifth generation iPod
®
Nano
devices, the iPod
®may not be recog-
nized when the battery level is low.
Please charge the iPod
®
for use.
• The search/play orders shown with- in the iPod
®
device may differ from
the orders shown within the audio
system.
• If the iPod
®
malfunctions due to an
iPod
®
device defect, reset the iPod
®
and try again. (To learn more, refer
to your iPod
®
manual)
(Continued) (Continued)
• Some iPod
®s may not sync with the
System depending on the version. If
the Media is removed before the
Media is recognized, then the sys-
tem may not properly restore the
previously operated mode. (iPad
®
charging is not supported.)
• Use an iPod
®
cable shorter than 1
meter in length such as the one orig-
inally supplied with a new iPod
®,
longer cables may lead to the audio
system not recognizing the iPod
®.

#!'%$&%" '&$Change Song/File: [
[
SEEK/TRACK]
button[∨ SEEK/TRACK]
button
• Pressing the button: Plays the cur- rent song from the beginning. If the
[∨ SEEK/TRACK]
button is pressed
again within 1 second, the previous
song is played.
• Pressing and holding the button (more than 1.0 second): Rewinds
the song.
[SEEK/TRACK ∧]
button
• Pressing the button: Plays the next song.
• Pressing and holding the button (more than 1.0 second): Fast-for-
wards the song.
Information
• BT Audio*, AUX don’t support Rewind/Fast-forward feature.
• Changing the previous/next song may not be supported in some
Bluetooth
®
devices.
* if equipped
Search Song:
TUNE
knob
(USB/iPod
®
only)
• Turning
TUNE
knob: Searches for
songs(files).
• Pressing
TUNE
knob: Plays selected
song(file).
Information
• BT Audio* and AUX don’t support playlist feature.
• In iPod
®
Mode, song (file) lists are
not supported if music is played
using the Music application after
connecting the iPod
®.
• While BT Audio* is playing, press- ing the
TUNE
knob plays and paus-
es the current song.
* if equipped
Search Folder:
[FOLDER]
button
Searches the previous/next folder.
(USB)
Information
If a folder is selected by pressing theTUNE
knob, the first file within the
selected folder will be played.
USBDisplays Menu Popup when pressing
the
[MENU]
button.
ListMoves to the list screen.InformationDisplays information of the current
song.Sound SettingsMoves to Sound Settings.
i
ii

#
!'%$&%" '&$
•• If the Bluetooth
®
device is not con-
nected, it is not possible to enter
Phone mode. After connecting
your Bluetooth
®
device to your car,
use the Bluetooth®
features.
• You will not be able to use the handsfree feature when your
phone is outside of the cellular
s ervice area (e.g. in a tunnel, in a
underground, in a mountainous
area, etc.).
• If the cellular phone si gnal is poor
or the vehicles interior noise is too
loud, it may be difficult to hear the
other person’s voice during a call.
• Do not place the Bluetooth
®
device
near or inside metallic objects, oth-
erwise communications with
Bluetooth
®
system or cellular serv-
ice stations can be disturbed.
• Placing the audio system within an electromagne tic environment may
result in noise interference.
(Continued)(Continued)
• Some Bluetooth
®
devices may
cause interference noise or mal-
function to audio system. In this
case, store the device in a different
location may resolve the condition.
• While a device is connected through Bluetooth
®, your device
may discharge quicker than usual
for additional Bluetooth
®-related
operations.
• The handsfree call volume and quality may differ depending on the
Bluetooth
®
device.
• If Connection Priority is set upon vehicle ignition (IGN/ACC ON), the
Bluetooth
®
device will be automat-
ically connected. Even if you are
outside, the Bluetooth
®
device will
be automatically connected once
you are in the vicinity of the vehi-
cle. If you do not want to automati-
cally connect your Bluetooth
®
device, turn off the Bluetooth
®
fea-
ture in your Bluetooth
®
device.
(Continued) (Continued)
• In some Bluetooth
®
devices, start-
ing the ignition while talking
through Bluetooth®
enabled
handsfree call will result in the call
becoming disconnected due to car
handsfree call transfer. If you use
your phone outside the vehicle,
turn off the Bluetooth
®
feature in
your phone.
NOTICE

#
!'%$&%" '&$
SSteering wheel remote control❈The actual features in the car may
differ from the illustration. (1)
MUTE
• Press Button to mutes the audio (It
will be pause in BT music mode).
• Mutes the microphone during a call.
(2)
VOLUME
• Press to adjust the volume.
(3)
CALL
• Pressing the button. - If not in Bluetooth
®
Handsfree
mode or receiving a phone call.
First press: Display Dial Number
screen.
Second press: Automatically dis-
play the most recently Dialed
Call number.
Third press: Dial the phone num-
ber entered.
- Press in the Incoming Call notifi- cation screen to accept the
phone call.
• In 3-way call, press in Bluetooth hands-free mode to switch to wait-
ing call.
• Single press, puts call on hold to un hold press once again. • Pressing and holding the button.
(more than 1.0 second)
- If not in Bluetooth
®
Handsfree
mode or receiving a phone call,
the most recently Dialed Call
number is dialed.
- Press in Bluetooth
®
Handsfree
mode to transfer the call to your
cell phone.
- Press in cell phone mode to switch to Bluetooth
®
Handsfree
mode.
(4)
END
• Press in Bluetooth
®
Handsfree
mode to end the phone call.
• Press in the incoming call screen to reject the call.

#
!'%$&%" '&$
RRadio FM/AM Mode(1) BandSwitch between FM, AM and DRM.(2) PresetsView all presets.(3) ListView all available stations.(4) MenuNavigate to the menu screen.
Switching between FM, AM and DRM• Press the
[RADIO]
button on the
audio system to switch between
FM, AM and DRM.
• Select [Band] on the screen to switch between FM, AM and DRM.
Searching stationsPress the
[SEEK/TRACK]
button to
search stations.
ListA list of all available stations in the
vehicle’s current location is dis-
played. Select the desired station.
Favorite stations can be saved to
[Presets] by selecting [save].
Select the refresh icon in order
to update the list of available stations
at the vehicle’s current location while
in FM/AM Mode.
PresetsSave up to 40 frequently used stations.
To listen to a preset, select the
desired station list.
Press and hold the desired slot from
1 through 40. This saves the current
station in the selected slot.
If the slot is empty, simply selecting
saves the station to the slot.MenuSelect [Menu], and select the desired
function.
• Scan: All available stations are played for five seconds each.
• Sound Settings: Audio sound set- tings can be changed.

#
!'%$&%" '&$
IInformation
• DRM (Digital Radio Mondiale) is a
digital replacement of AM, an initia-
tive by All India Radio (AIR).
• DRM is available in only few cities in India as of now & AIR is expand-
ing this technology to other regions
of the country also.
• The DRM transmission range & the timings depends on the AIR trans-
mission schedule.
• After you tuned to a receivable DRM station, it may take a few sec-
onds to decode the audio. This is not
a issue but the nature of the digital
signal.
• The text information/Weather/ News Report completely depends on
the DRM broadcaster.
• You may experience a mute while receiving a DRM station, if there is a
loss of signal or any obstructions
around the car location like high
tension power lines, tunnels, metal
bridges and multi-storied buildings.
• Emergency Warning is the sole responsibility of All India Radio, as
they transmit this warning in case of
emergency.
MenuSelect [Menu], and select the desired
function.
• Weather/News Report: Enable or disable Weather/News Report.
• Scan: All available stations are played for five seconds each.
• Sound Settings: Audio sound set- tings can be changed.
Emergency WarningYou can receive a emergency warn-
ing on your screen if Indian govern-
ment or All India Radio (AIR) raises
an alarm of emergency across the
country through DRM transmission.
Information
• The system may switch to DRMmode even though you are in other
modes/turned off the system while
running the car.
• This is a initiation by Indian gov- ernment in the interest of public
safety.i
i

#
!'%$&%" '&$
(Continued)
• Use of aftermarket USB hubs and
extension cables can result in the
vehicle’s audio system failing to rec-
ognize your USB device. Connect
the USB device directly to the multi-
media port of your vehicle.
• When using high-capacity USB devices with logical drive divisions,
only files saved on the highest level
logical drive can be played.
If applications are loaded on a USB
drive, file playback may fail.
• Some MP3 players, cell phones, dig- ital cameras, etc. (USB devices that
are not recognized as mobile stor-
age) may not operate normally
when connected.
• USB charging may not be supported by some mobile devices.
• Operation is guaranteed only for standard (Metal Cover Type) USB
Memory drives.
• Operation of HDD, CF, SD and memory stick devices is not guaran-
teed.
(Continued)(Continued)
• DRM (Digital Rights Management)
files cannot be played.
• SD-type USB memory, CF-type USB memory, and other USB mem-
ory devices that require adapters
for connection are not supported.
• Proper operation of USB HDDs or USB drives with connectors that
loosen due to vehicle vibrations is
not guaranteed. (iStick, etc.)
• USB products that are used as key chains or
cell phone accessories
may damage the USB
jack and affect proper
file playback. Please refrain from
use. Use only products with plug
connectors, as shown in the follow-
ing illustration.
• When MP3 devices or cell phones are connected simultaneously
through AUX, BT Audio and USB
modes, a popping noise or malfunc-
tion may occur.
• Use USB 2.0 devices for better com- patibility. Maximum device size
supported is 32 GB.
UU SB(1) RepeatEnable/disable repeat mode.(2) ShuffleEnable/disable shuffle mode.(3) ListView a list of all categories. (4) MenuNavigate to the menu screen.

#!'%$&%" '&$
IInformation- Using the iPod
®
Devices
• To use the audio system’s iPod
®con-
trol function, use the dedicated
cable provided with your iPod®.
• Connecting the iPod
®
to the vehicle
during play may result in a loud
noise that lasts about one to two sec-
onds. Connect the iPod®to the vehi-
cle after stopping or pausing play.
• Connect the iPod
®with the vehicle in
the ACC ON state to begin charging.
• When connecting the iPod
®
cable,
be sure to fully push the cable into
the port.
• When Equalizer effects are enabled simultaneously on external devices,
such as iPod
®s and the audio sys-
tem, the Equalizer effects may over-
lap, causing sound quality deterio-
ration or distortion. Deactivate the
Equalizer function for all external
devices, if possible.
• Noise may occur when your iPod
®
or the AUX port is connected.
Disconnect and store separately
when not in use.
(Continued)(Continued)
• There may be noise if the audio sys-
tem is used with an iPod
®
or AUX
external device connected to the
power jack. In these cases, discon-
nect the iPod
®
or external device
from the power jack.
• Play may be interrupted, or device malfunctions may occur depending
on the characteristics of your
iPod
®/iPhone
®/iPad
®.
• Play may fail if your iPhone
®is con-
nected through both Bluetooth®and
USB. In this case, select Dock con- nector or Bluetooth
®
on your
iPhone
®
to change the sound output
settings.
• If your software version does not support the communication proto-
col or your iPod
®
is not recognized
due to device failure, anomalies or
defects, iPod
®
mode cannot be used.
•iPod
®
nano (5th generation) devices
may not be recognized if the battery
is low. Charge sufficiently before use.
(Continued)(Continued)
• The search and song play order in
the iPod
®
device may be different
from the search order in the audio
system.
• If the iPod®
has failed due to an
internal defect, please reset the
iPod
®
(consult your iPod
®
manual).
• Depending on the software version, the iPod
®
may fail to sync with the
system. If the media is removed or
disconnected before recognition, the
previous mode may not be restored
(iPad
®
cannot be charged).
• Cables other than the 1-meter cable provided with iPod
®/iPhone
®/iPad
®
products may not be recognized.
• When other music apps are used on your iPod
®, the system sync func-
tion may fail due to malfunction of
the iPod
®
application.
i

#
!'%$&%" '&$
IInformation
The 6-digit passkey in the image
above is an example. Refer to your
vehicle for the actual passkey.Pairing a second Bluetooth
®
device
Press the
[SETUP]
button on the
audio system ➟ Select [Bluetooth] ➟
Select [Connections] ➟ Select [Add
New].
- The pairing procedure from this point is identical to [Pairing the first
Bluetooth device].
Information
• Bluetooth
®
standby mode lasts for
three minutes. If a device is not
paired within three minutes, pairing
is canceled. Start over from the
beginning.
• For most Bluetooth
®
devices, a con-
nection is established automatically
after pairing. Some devices, howev-
er, require separate confirmation
when connecting after pairing. Be
sure to chec k your Bluetooth
®
device
after pairing to confirm that it has
connected.
Connecting Bluetooth
®
devices
If there are no connected devicesPress the
[PHONE]
button on the
audio system or the [CALL]
button in
the steering wheel remote control ➟
List of paired Bluetooth
®
devices ➟
Select the desired Bluetooth
®
device
from the list ➟ Connect Bluetooth
®.
i
i