Doors HYUNDAI I20 2023 Owner's Manual
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2023, Model line: I20, Model: HYUNDAI I20 2023Pages: 649, PDF Size: 12.35 MB
Page 193 of 649
5-52
Convenient features
INTERIOR LIGHTS
NOTICE
Do not use the interior lights for
extended periods when the engine is
turned off or the battery will discharge.
Interior light AUTO cut
The interior lights will automatically go
off approximately 20 minutes after the
engine is turned off and the doors are
closed. If a door is opened, the light will
go off 40 minutes after the engine is
turned off. If the doors are locked by the
remote key or smart key and the vehicle
enters the armed stage of the theft
alarm system, the lights will go off five
seconds later.
Front Room Lights
OBC3N050017
(1) Front Map Lamp
(2) Front Door Lamp
(3) Front Room Lamp ON
(4) Front Room Lamp OFF
) U R Q W P D S O D P S
Press either of these lens to turn the
map lamp on or off. This light produces a
spot beam for convenient use as a map
lamp at night or as a personal lamp for
the driver and the front passenger.
) U R Q W G R R U O D P S ):
The front or rear
room lamps come on when the front
or rear doors are opened if the engine
is running or not. When doors are
unlocked by the remote key or smart
key, the front and rear lamps come on
for approximately 30 seconds as long as
any door is not opened. The front and
rear room lamps go out gradually after
approximately 30 seconds if the door is
closed. However, if the ignition switch
is in the ON position or all doors are
locked, the front and rear lamps will turn
off. If a door is opened with the ignition
switch in the ACC position or the OFF
position, the front and rear lamps stay
on for about 20 minutes.
) U R Q W U R R P O D P S
() : Press the button to turn ON the
room lamp for the front/rear
seats.
(
) : Press the button to turn OFF the
room lamp for the front/rear
seats.
Page 228 of 649
5-87
05
USB charger (if equipped)
OBC3N051027AU
The USB charger is located inside the
F R Q V R O H E R [ E H W Z H H Q W K H G U L Y H UT V V H D W
D Q G W K H I U R Q W S D V V H Q J H UT V V H D W , Q V H U W
the USB charger into the USB port, and
re-charge a smart phone or a tablet PC.
[ $ F K D U J L Q J V W D W X V F K D U J L Q J F R P S O H W L R Q
message is displayed on a screen of a
smart phone or a tablet PC.
[ $ V P D U W S K R Q H R U D W D E O H W 3 & P D \
get warmer during the re-charging
process. It does not indicate any
malfunction with the charging system.
[ $ V P D U W S K R Q H R U D W D E O H W 3 & Z K L F K
adopts a different re-charging
method, may not be properly
re-charged. In this case, use an
exclusive charger of your device.
[ 7 K H F K D U J L Q J W H U P L Q D O L V R Q O \ W R
re-charge a device. Do not use the
charging terminal either to turn ON an
audio or to play media on the AVN.
Wireless mobile phone charging
system (if equipped)
OBC3N050028
[A] : Charging pad
There is a wireless mobile phone charger
inside the front console.
The system is available when all doors
are closed, and when the ignition switch
is in the ON position.
Page 230 of 649
5-89
05
NOTICE
[ 7 K H Z L U H O H V V P R E L O H S K R Q H F K D U J L Q J
system may not support certain
mobile phones, which are not verified
for the Qi specification (
).
[ : K H Q S O D F L Q J \ R X U P R E L O H S K R Q H R Q
the charging mat, position the phone
in the middle of the mat for optimal
charging performance. If your mobile
phone is off to the side, the charging
rate may be less and in some cases
the mobile phone may experience
higher heat conduction.
[ , Q V R P H F D V H V W K H Z L U H O H V V F K D U J L Q J
may stop temporarily when the
5 H P R W H . H \ R U 6 P D U W . H \ L V X V H G
either when starting the vehicle or
locking/unlocking the doors, etc.
[ : K H Q F K D U J L Q J F H U W D L Q P R E L O H
phones, the charging indicator may
not change to green when the mobile
phone is fully charged.
[ 7 K H Z L U H O H V V F K D U J L Q J S U R F H V V P D \
temporarily stop, when temperature
abnormally increases inside the
wireless mobile phone charging
system. The wireless charging
process restarts, when temperature
falls to a certain level.
[ 7 K H Z L U H O H V V F K D U J L Q J S U R F H V V P D \
temporarily stop when there is
any metallic item, such as a coin,
between the wireless mobile phone
charging system and a mobile phone. [ : K H Q F K D U J L Q J V R P H P R E L O H S K R Q H V
with a self-protection feature,
the wireless charging speed may
decrease and the wireless charging
may stop.
[ , I W K H P R E L O H S K R Q H K D V D W K L F N F R Y H U
the wireless charging may not be
possible.
[ , I W K H P R E L O H S K R Q H L V Q R W F R P S O H W H O \
contacting the charging pad, wireless
charging may not operate properly.
[ 6 R P H P D J Q H W L F L W H P V F U H G L W F D U G V
phone cards, passbook and tickets)
may be damaged whilst using the
wireless charging process.
[ : K H Q D Q \ P R E L O H S K R Q H Z L W K R X W
a wireless charging function or a
metallic object is placed on the
charging pad, a small noise may
sound. This small sound is due to the
vehicle discerning compatibility of
the object placed on the charging
pad. It does not affect your vehicle or
the mobile phone in any way.
· Some mobile phones may not be
able to put on the charging pad due
to their size. In this case, wireless
charging may be limited.
i Information
, I W K H L J Q L W L R Q V Z L W F K L V L Q W K H / 2 & . 2 ) )
position, the charging also stops.
Page 277 of 649
6-4
Driving your vehicle
Before entering the vehicle
[ Be sure all windows, outside mirror(s),
and outside lights are clean and
unobstructed.
[ Remove frost, snow, or ice.
[ Visually check the tyres for uneven
wear and damage.
[ Check under the vehicle for any sign
of leaks.
[ Be sure there are no obstacles behind
you if you intend to back up.
Before starting
[ Make sure the bonnet, the tailgate,
and the doors are securely closed and
locked.
[ Adjust the position of the seat and
steering wheel.
[ Adjust the inside and outside rearview
mirrors.
[ Verify all the lights work.
[ Fasten your seat belt. Check that all
passengers have fastened their seat
belts.
[ Check the gauges and indicators in the
instrument panel and the messages
on the instrument display when the
ignition switch is in the ON position.
[ Check that any items you are carrying
are stored properly or fastened down
securely.
WARNING
To reduce the risk of SERIOUS
INJURY or DEATH, take the following
precautions:
[ ALWAYS wear your seat belt. All
passengers must be properly belted
whenever the vehicle is moving. For
more details, refer to “Seat Belts” in
chapter 3.
[ Always drive defensively. Assume
other drivers or pedestrians may be
careless and make mistakes.
[ Stay focused on the task of driving.
Driver distraction can cause
accidents.
[ Leave plenty of space between you
and the vehicle in front of you.
WARNING
NEVER drink or take drugs and drive.
Drinking or taking drugs and driving
is dangerous and may result in an
accident and SERIOUS INJURY or
DEATH.
Drunk driving is the number one
contributor to the highway death
toll each year. Even a small amount
of alcohol will affect your reflexes,
perceptions and judgment. Just
one drink can reduce your ability to
respond to changing conditions and
emergencies and your reaction time
gets worse with each additional drink.
Driving whilst under the influence
of drugs is as dangerous or more
dangerous than driving under the
influence of alcohol.
You are much more likely to have a
serious accident if you drink or take
drugs and drive. If you are drinking or
taking drugs, don’t drive. Do not ride
with a driver who has been drinking
or taking drugs. Choose a designated
driver or call a taxi.
BEFORE DRIVING
Page 409 of 649
07
7-63
Safe Exit Warning operation
Safe Exit Warning warning
OBC3070007
Collision warning when exiting vehi-
cle
[ When an approaching vehicle from the
rear is detected at the moment a door
L V R S H Q H G W K H S : D W F K R X W I R U W U D I I L FT
warning message will appear on the
cluster, and an audible warning will
sound.
[ Safe Exit Warning will warn the driver
when your vehicle speed is below 2
mph (3 km/h), and the speed of the
approaching vehicle from the rear is
above 3 mph (6 km/h).
WARNING
Take the following precautions when
using Safe Exit Warning:
[ For your safety, change the Settings
after parking the vehicle at a safe
location.
[ If any other function’s warning
message is displayed or audible
warning is generated, Safe Exit
Warning warning message may not
be displayed and audible warning
may not be generated.
[ You may not hear the warning
sound of Safe Exit Warning if the
surrounding is noisy. [ Safe Exit Warning does not operate
in all situations or cannot prevent all
collisions.
[ Safe Exit Warning may warn the
driver late or may not warn the driver
depending on the road and driving
conditions. Always check vehicle
surroundings.
[ The driver and passengers are
responsible for accidents that occurs
whilst exiting the vehicle. Always
check the surroundings before you
exit the vehicle.
[ Never deliberately operate Safe
Exit Warning. Doing so may lead to
serious injury or death.
[ Safe Exit Warning does not operate
if there is a problem with Blind-Spot
Safety system. The warning message
of Blind-Spot Safety system will
appear when:
- Blind-Spot Safety system sensor or
the sensor surrounding is polluted
or covered
- Blind-Spot Safety system fails to
warn passengers or falsely warn
passengers
Information
After the engine is turned off, Safe Exit
Warning operates approximately for 3
minutes, but turns off immediately if the
doors are locked.
Page 542 of 649
8-27
08
Notes on the safe use of the
Tyre Mobility Kit
[ Park your car at the side of the road
so that you can work with the Tyre
Mobility Kit away from moving traffic.
[ To be sure your vehicle does not
move, even when you're on fairly level
ground, always set your parking brake.
[ Only use the Tyre Mobility Kit for
sealing/inflation passenger car tyres.
Only punctured areas located within
the tread region of the tyre can be
sealed using the tyre mobility kit.
[ Do not use on motorcycles, bicycles or
any other type of tyres.
[ When the tyre and wheel are
damaged, do not use Tyre Mobility Kit
for your safety.
[ Use of the Tyre Mobility Kit may not be
effective for tyre damage larger than
approximately 0.24 in (6 mm).
We recommend that you contact a
HYUNDAI authorised repairer.[ Do not use the Tyre Mobility Kit
if a tyre is severely damaged by
driving run flat or with insufficient air
pressure.
[ Do not remove any foreign objects
such as nails or screws that have
penetrated the tyre.
[ Provided the car is outdoors, leave the
engine running. Otherwise operating
the compressor may eventually drain
the car battery.
[ Never leave the Tyre Mobility Kit
unattended whilst it is being used.
[ Do not leave the compressor running
for more than 10 min. at a time or it
may overheat.
[ Do not use the Tyre Mobility Kit if the
ambient temperature is below -22°F
(-30°C).
Page 566 of 649
9-7
09
WARNING
Performing maintenance work on a
vehicle can be dangerous. If you lack
sufficient knowledge and experience
or the proper tools and equipment
to do the work, we recommend that
the system be serviced by a HYUNDAI
authorised repairer. ALWAYS follow
these precautions for performing
maintenance work:
[ 3 D U N \ R X U Y H K L F O H R Q O H Y H O J U R X Q G
move the shift lever into the P (Park,
for automatic transmission/dual
clutch transmission vehicle) position,
apply the parking brake, and place
the ignition switch in the LOCK/OFF
position.
[ % O R F N W K H W \ U H V I U R Q W D Q G E D F N W R
prevent the vehicle from moving.
Remove loose clothing or jewellery
that can become entangled in
moving parts.
[ , I \ R X P X V W U X Q W K H H Q J L Q H G X U L Q J
maintenance, do so out doors or in an
area with plenty of ventilation.
[ . H H S I O D P H V V S D U N V R U V P R N L Q J
materials away from the battery and
fuel-related parts.The following lists are vehicle checks
and inspections that should be
performed by the owner or a HYUNDAI
authorised repairer at the frequencies
indicated to help ensure safe,
dependable operation of your vehicle.
Any adverse conditions should be
brought to the attention of your dealer
as soon as possible.
These Owner Maintenance vehicle
checks are generally not covered by
warranties and you may be charged for
labour, parts and lubricants used.
Owner maintenance schedule
When you stop for fuel:
[ Check the coolant level in the engine
coolant reservoir.
[ Check the windscreen washer fluid
level.
[ Check for low or under-inflated tyres.
[ Check the radiator and condenser.
Check if the front of the radiator and
condenser are clean and not blocked
with leaves, dirt or insects, etc.
If any of the above parts are extremely
dirty or you are not sure of their
condition, we recommend that
you contact a HYUNDAI authorised
repairer.
WARNING
% H F D U H I X O Z K H Q F K H F N L Q J \ R X U H Q J L Q H
coolant level when the engine is hot.
This may result in coolant being blown
out of the opening and cause serious
burns and other injuries.
OWNER MAINTENANCE
Page 639 of 649
9-80
Maintenance
NOTICE
If you park your vehicle near a stainless
steel sign or glass facade building, the
vehicle’s exterior plastic parts such
as a bumper, spoiler, garnish, lamp
or outside rearview mirror might be
damaged due to sunlight reflected
from the sign or building. To prevent
damage of the exterior plastic parts,
you should avoid parking in areas
where light may be reflected or use a
car cover. (The exterior plastic parts
applied to your vehicle may vary.)
Exterior care
Exterior general caution
It is very important to follow the label
directions when using any chemical
cleaner or polish. Read all warning and
caution statements that appear on the
label.
Finish maintenance
: D V K L Q J
To help protect your vehicle’s finish
from rust and deterioration, wash it
thoroughly and frequently at least once
a month with lukewarm or cold water.
If you use your vehicle for off-road driving,
you should wash it after each off-road trip.
Pay special attention to the removal of any
accumulation of salt, dirt, mud, and other
foreign materials. Make sure the drain
holes in the lower edges of the doors and
rocker panels are kept clear and clean.
Insects, tar, tree sap, bird droppings,
industrial pollution and similar deposits
can damage your vehicle’s finish if not
removed immediately.
Even prompt washing with plain water
may not completely remove all these
deposits.
A mild soap, safe for use on painted
surfaces, may be used.
After washing, rinse the vehicle
thoroughly with lukewarm or cold water.
Do not allow soap to dry on the finish.
NOTICE
[ ' R Q R W X V H V W U R Q J V R D S F K H P L F D O
detergents or hot water, and do not
wash the vehicle in direct sunlight
or when the body of the vehicle is
warm.
[ % H F D U H I X O Z K H Q Z D V K L Q J W K H V L G H
windows of your vehicle.
Especially, with high-pressure water,
water may leak through the windows
and wet the interior.
[ 7 R S U H Y H Q W G D P D J H W R W K H S O D V W L F
parts and lamps, do not clean
with chemical solvents or strong
detergents.
WARNING
Wet brakes
After washing the vehicle, test the
brakes whilst driving slowly to see if
they have been affected by water. If
braking performance is impaired, dry
the brakes by applying them lightly
whilst maintaining a slow forward
speed.
+ L J K S U H V V X U H Z D V K L Q J
[ : K H Q X V L Q J K L J K S U H V V X U H Z D V K H U V
make sure to maintain sufficient
distance from the vehicle.
Insufficient clearance or excessive
pressure can lead to component
damage or water penetration.
[ ' R Q R W V S U D \ W K H F D P H U D V H Q V R U V R U
its surrounding area directly with a
high pressure washer. Shock applied
from high pressure water may cause
the device to not operate normally.
[ ' R Q R W E U L Q J W K H Q R ] ] O H W L S F O R V H W R
boots (rubber or plastic covers) or
connectors as they may be damaged
if they come into contact with high
pressure water.
APPEARANCE CARE
Page 641 of 649
9-82
Maintenance
Finish damage repair
Deep scratches or stone chips in the
painted surface must be repaired
promptly. Exposed metal will quickly
rust and may develop into a major repair
expense.
NOTICE
If your vehicle is damaged and requires
any metal repair or replacement,
be sure the body shop applies anti-
corrosion materials to the parts
repaired or replaced.
NOTICE
Matte paint finish vehicle
(if equipped)
In case of matte paint finish vehicles,
it is impossible to modify only the
damaged area and repair of the whole
part is necessary. If the vehicle is
damaged and painting is required, we
recommend that you have your vehicle
maintained and repaired by a HYUNDAI
authorised repairer. Take extreme care,
as it is difficult to restore the quality
after the repair.
Bright-metal maintenance
[ 7 R U H P R Y H U R D G W D U D Q G L Q V H F W V X V H
a tar remover, not a scraper or other
sharp object.
[ 7 R S U R W H F W W K H V X U I D F H V R I E U L J K W P H W D O
parts from corrosion, apply a coating
of wax or chrome preservative and rub
to a high luster.
[ ' X U L Q J Z L Q W H U Z H D W K H U R U L Q F R D V W D O
areas, cover the bright metal parts
with a heavier coating of wax or
preservative. If necessary, coat the
parts with non-corrosive petroleum
jelly or other protective compound.
Underbody maintenance
Corrosive materials used for ice and
snow removal and dust control may
collect on the underbody. If these
materials are not removed, accelerated
rusting can occur on underbody parts
such as the fuel lines, frame, floor pan
and exhaust system, even though they
have been treated with rust protection.
Thoroughly flush the vehicle underbody
and wheel openings with lukewarm or
cold water once a month, after off-road
driving and at the end of each winter.
Pay special attention to these areas
because it is difficult to see all the mud
and dirt. It will do more harm than good
to wet down the road grime without
removing it. The lower edges of doors,
rocker panels, and frame members have
drain holes that should not be allowed
to clog with dirt; trapped water in these
areas can cause rusting.