assist HYUNDAI I20 2023 Owner's Manual
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2023, Model line: I20, Model: HYUNDAI I20 2023Pages: 649, PDF Size: 12.35 MB
Page 191 of 649
5-50
Convenient features
- If the light switch is pushed away
when High Beam Assist is operating,
High Beam Assist will turn off.
- If the light switch is pulled towards
you when the high beam is off, the
high beam will turn on. When you let
go of the light switch, the lever will
move to the middle and the high beam
will turn off.
- If the light switch is pulled towards
you when the high beam is on by High
Beam Assist, and High Beam Assist
will turn off.
- If the light switch is placed to the
headlight position (
), High Beam
Assist will turn off and the low beam
will be on continuously.
When High Beam Assist is operating, the
high beam switches to low beam in the
following conditions.
- When the headlight of an on-coming
vehicle is detected.
- When the tail light of a vehicle in front
is detected.
- When the headlight or tail light of a
motorcycle or a bicycle is detected.
- When the surrounding ambient light is
bright enough that high beams are not
required.
- When streetlights or other lights are
detected.
- When the light switch is not in the
AUTO position.
- When High Beam Assist is off.
- When the vehicle speed is below 19
mph (30 km/h).
System malfunction and
limitations
System malfunction
OTM050218L
When High Beam Assist is not working
properly, the warning message will come
on for a few seconds. After the message
disappears, the master warning light
(
) will illuminate.
We recommend that you take your
vehicle to a HYUNDAI authorised
repairer and have the system checked.
CAUTION
The system may not operate normally if
any of the following conditions should
occur:
1. When the illumination from an
on-coming vehicle or a vehicle in
front is dim. Such examples may
include:
[ When the headlights of an oncoming
vehicle or the tail lights of a vehicle
in front is covered with dust, snow,
or water
[ When the headlights on an
R Q F R P L Q J Y H K L F O H D U H 2 ) ) E X W W K H
fog lights are ON)
Page 192 of 649
5-51
05
2. When the front view camera is
adversely affected by an external
condition. Such examples may
include:
[ When the vehicle’s headlights have
been damaged or not repaired
properly
[ When the vehicle headlights are not
aimed properly
[ When the vehicle is driven on a
narrow curved road or rough road
[ When the vehicle is driven on an
uphill road or downhill road
[ When only part of the vehicle in front
is visible on a crossroad or curved
road
[ When there is a traffic light,
reflecting sign, flashing sign or mirror
[ When the road conditions are bad
such as being wet or covered with
snow
[ When a vehicle suddenly appears
from a curve
[ When the vehicle is tilted from a flat
tyre or being towed
[ : K H Q / D Q H . H H S L Q J $ V V L V W V \ V W H P
warning light illuminates
[ When the light from the oncoming or
front vehicle is not detected because
of exhaust fume, smoke, fog, snow,
etc.
[ When the front window is covered
with foreign matters such as ice,
dust, fog, or is damaged
3. When the forward visibility is poor.
Such examples may include:
[ When the headlights of an oncoming
vehicle or a vehicle in front is not
detected due to poor outside
visibility (smog, smoke, dust, fog,
heavy rain, snow, etc.)
[ When the windscreen visibility is
poor WARNING
[ 7 K H I X Q F W L R Q P D \ Q R W Z R U N D U R X Q G
seconds after starting the vehicle or
the initialization or rebooting of the
front view camera.
[ ' R Q R W D W W H P S W W R G L V D V V H P E O H
the front view camera without the
assistance of a HYUNDAI authorised
repairer technician.
If the front view camera is removed
for any reason, the system may need
to be re-calibrated. We recommend
that the system be inspected by a
HYUNDAI authorised repairer.
[ , I W K H Z L Q G V F U H H Q R I \ R X U Y H K L F O H
is replaced, most likely the front
view camera will need to be
re-calibrated. If this occurs, have
your vehicle inspected and have the
system re-calibrated by a HYUNDAI
authorised repairer.
[ % H F D U H I X O W K D W Z D W H U G R H V QT W J H W L Q W R
front view camera unit and do not
remove or damage related parts of
High Beam Assist system.
[ ' R Q R W S O D F H R E M H F W V R Q W K H F U D V K
pad that reflect light such as mirrors,
white paper, etc. The system may
malfunction if sunlight is reflected.
[ $ W W L P H V + L J K % H D P $ V V L V W P D \
not work properly. The system is
for your convenience only. It is the
responsibility of the driver for safe
driving practices and always check
the road conditions for your safety.
[ : K H Q W K H V \ V W H P G R H V Q R W R S H U D W H
normally, change the light position
manually between the high beam and
low beam.
Page 274 of 649
Before driving .................................................................................................. 6-4Before entering the vehicle ...................................................................................... 6-4
Before starting ........................................................................................................... 6-4
Ignition switch ................................................................................................. 6-5Key ignition switch .................................................................................................... 6-5
Engine Start/Stop button .......................................................................................... 6-8
Manual transmission .....................................................................................6-13Manual transmission operation ............................................................................... 6-13
Good driving practices ............................................................................................. 6-15
Intelligent Manual Transmission (iMT) .........................................................6-16Intelligent Manual Transmission (iMT) operation .................................................. 6-16
Automatic transmission ............................................................................... 6-20Automatic transmission operation ......................................................................... 6-20
Good driving practices ............................................................................................ 6-24
Dual clutch transmission .............................................................................. 6-26Dual clutch transmission operation ....................................................................... 6-26
Parking ..................................................................................................................... 6-33
Good driving practices ............................................................................................ 6-34
Braking system .............................................................................................. 6-35Power brakes ........................................................................................................... 6-35
Disc brakes wear indicator ..................................................................................... 6-35
Rear drum brakes .................................................................................................... 6-36
Parking brake ........................................................................................................... 6-36
Anti-lock Brake System (ABS) ..................................................................................6-37
Electronic Stability Control (ESC) .......................................................................... 6-39
Vehicle Stability Management (VSM) .....................................................................6-41
Hill-Start Assist Control (HAC) ................................................................................ 6-43
Emergency Stop Signal (ESS) ................................................................................. 6-43
Multi-Collision Brake (MCB) ................................................................................... 6-44
Good braking practices ........................................................................................... 6-45
Idle Stop and Go (ISG) system .....................................................................6-46Activating the ISG .................................................................................................... 6-46
Deactivating the ISG ............................................................................................... 6-46
Condition of ISG system operation ........................................................................ 6-50
ISG Indication ........................................................................................................... 6-51
ISG malfunction ....................................................................................................... 6-52
6. Driving your vehicle
6
Page 278 of 649
6-5
06
IGNITION SWITCH
WARNING
To reduce the risk of SERIOUS
INJURY or DEATH, take the following
precautions:
[ NEVER allow children or any person
who is unfamiliar with the vehicle to
touch the ignition switch or related
parts. Unexpected and sudden
vehicle movement can occur.
[ NEVER reach through the steering
wheel for the ignition switch, or any
other control, whilst the vehicle is in
motion. The presence of your hand
or arm in this area may cause a loss
of vehicle control resulting in an
accident.
Key ignition switch (if equipped)
OIB054010
WARNING
[ NEVER turn the ignition switch to
the LOCK or ACC position whilst
the vehicle is in motion except in
an emergency. This will result in
the engine turning off and loss of
power assist for the steering and
brake systems. This may lead to loss
of directional control and braking
function, which could cause an
accident.
[ Before leaving the driver’s seat,
always make sure the shift lever
is in the 1st gear when the vehicle
is parked on an uphill and in
R(Reverse) on a downhill (for manual
transmission vehicle), or P (Park, for
automatic transmission/dual clutch
transmission vehicle) position, apply
the parking brake, and turn the
ignition switch to the LOCK position.
Unexpected vehicle movement may
occur if these precautions are not
followed.
NOTICE
Never use aftermarket keyhole covers.
This may generate start-up failure due
to communication failure.
Page 281 of 649
6-8
Driving your vehicle
Engine Start/Stop button
(if equipped)
OBC3N061018AU
Whenever the front door is opened, the
Engine Start/Stop button will illuminate
and will go off 30 seconds after the door
is closed. (if equipped)
WARNING
To turn the engine off in an emergency:
Press and hold the Engine Start/ Stop
button for more than two seconds OR
rapidly press and release the Engine
Start/Stop button three times (within 3
seconds).
If the vehicle is still moving, you
can restart the engine without
depressing the brake pedal (Automatic
transmission) /brake pedal and clutch
pedal (Manual transmission) by
pressing the Engine Start/Stop button
with the shift lever in the N (Neutral)
position.
WARNING
[ NEVER press the Engine Start/ Stop
button whilst the vehicle is in motion
except in an emergency. This will
result in the engine turning off and
loss of power assist for the steering
and brake systems. This may lead
to loss of directional control and
braking function, which could cause
an accident.
[ Before leaving the driver’s seat,
always set the parking brake, press
the Engine Start/Stop button to the
OFF position, and take the Smart
Key with you. Unexpected vehicle
movement may occur if these
precautions are not followed.
Page 308 of 649
6-35
06
Power brakes
Your vehicle has power-assisted brakes
that adjust automatically through normal
usage.
If the engine is not running or is turned
off whilst driving, the power assist for
the brakes will not work. You can still
stop your vehicle by applying greater
force to the brake pedal than typical.
The stopping distance, however, will be
longer than with power brakes.
When the engine is not running, the
reserve brake power is partially depleted
each time the brake pedal is applied.
Do not pump the brake pedal when the
power assist has been interrupted.
Pump the brake pedal only when
necessary to maintain steering control
on slippery surfaces.
WARNING
Take the following precautions:
[ Do not drive with your foot resting
on the brake pedal. This will create
abnormal high brake temperatures,
excessive brake lining and pad wear,
and increased stopping distances.
[ When descending down a long or
steep hill, downshift to a lower
gear in order to control your
speed without using the brake
pedal excessively. Applying the
brakes continuously will cause
the brakes to overheat and could
result in a temporary loss of braking
performance.
[ Wet brakes may impair the vehicle’s
ability to safely slow down; the
vehicle may also pull to one side
when the brakes are applied.
Applying the brakes lightly will
indicate whether they have been
affected in this way. Always test your
brakes in this fashion after driving
through deep water. To dry the
brakes, lightly tap the brake pedal to
heat up the brakes whilst maintaining
a safe forward speed until brake
performance returns to normal.
Avoid driving at high speeds until the
brakes function correctly.
Disc brakes wear indicator
When your brake pads are worn and new
pads are required, you will hear a high
pitched warning sound from your front
or rear brakes. You may hear this sound
come and go or it may occur whenever
you depress the brake pedal.
Note that some driving conditions or
climates may cause a brake squeal
when you first apply (or lightly apply)
the brakes. This is normal and does not
indicate a problem with your brakes.
NOTICE
To avoid costly brake repairs, do not
continue to drive with worn brake pads.
i Information
$ O Z D \ V U H S O D F H E U D N H S D G V D V F R P S O H W H
I U R Q W R U U H D U D [ O H V H W V
BRAKING SYSTEM
Page 312 of 649
6-39
06
Electronic Stability Control
(ESC)
OBC3N061006AU
The Electronic Stability Control (ESC)
system helps to stabilize the vehicle
during cornering manoeuvres.
ESC checks where you are steering and
where the vehicle is actually going.
ESC applies braking pressure to any one
of the vehicle’s brakes and intervenes in
the engine management system to assist
the driver with keeping the vehicle on
the intended path. It is not a substitute
for safe driving practices. Always adjust
your speed and driving to the road
conditions.
WARNING
Never drive too fast for the road
conditions or too quickly when
cornering. The ESC system will not
prevent accidents.
Excessive speed in turns, abrupt
manoeuvres, and hydroplaning on wet
surfaces can result in severe accidents.
ESC operation
( 6 & 2 1 F R Q G L W L R Q
When the ignition switch is in the
ON position, the ESC and the ESC
OFF indicator lights illuminate for
approximately three seconds. After both
lights go off, the ESC is enabled.
: K H Q R S H U D W L Q J
When the ESC is in
operation, the ESC indicator
light blinks:
[ : K H Q \ R X D S S O \ \ R X U E U D N H V X Q G H U
conditions which may lock the wheels,
you may hear sounds from the brakes,
or feel a corresponding sensation in
the brake pedal. This is normal and it
means your ESC is active.
[ : K H Q W K H ( 6 & D F W L Y D W H V W K H H Q J L Q H
may not respond to the accelerator as
it does under routine conditions.
[ , I W K H & U X L V H & R Q W U R O Z D V L Q X V H Z K H Q
the ESC activates, the Cruise Control
automatically disengages. The Cruise
Control can be reengaged when the
road conditions allow. See “Cruise
Control System” later in this chapter
7 (if equipped).
[ : K H Q P R Y L Q J R X W R I W K H P X G R U
driving on a slippery road, the engine
RPM (revolutions per minute) may
not increase even if you press the
accelerator pedal deeply. This is to
maintain the stability and traction of
the vehicle and does not indicate a
problem.
Page 316 of 649
6-43
06
Hill-Start Assist Control (HAC)
(if equipped)
The Hill-Start Assist Control (HAC)
helps prevent the vehicle from rolling
backwards when starting a vehicle from
a stop on a hill. The system operates the
brakes automatically for approximately
2 seconds and releases the brake after 2
seconds or when the accelerator pedal is
depressed.
WARNING
Always be ready to depress the
accelerator pedal when starting off on
an incline. The HAC activates only for
approximately 2 seconds.
i Information
Page 318 of 649
6-45
06
Good braking practices
WARNING
Whenever leaving the vehicle or
parking, always come to a complete
stop and continue to depress the brake
pedal. Move the shift lever into the 1st
gear (for Manual transmission vehicle)
or N (Neutral) position (for Automatic
transmission/Dual clutch transmission
vehicle), then apply the parking brake,
and place the ignition switch in the
LOCK/OFF position.
Vehicles parked with the parking brake
not applied or not fully engaged may
roll inadvertently and may cause injury
to the driver and others. ALWAYS apply
the parking brake before exiting the
vehicle.Wet brakes can be dangerous! The
brakes may get wet if the vehicle is
driven through standing water or if it is
washed.
Your vehicle will not stop as quickly if
the brakes are wet. Wet brakes may
cause the vehicle to pull to one side.
To dry the brakes, apply the brakes
lightly until the braking action returns to
normal. If the braking action does not
return to normal, stop as soon as it is
safe to do so and we recommend that
you call a HYUNDAI authorised repairer
for assistance.
DO NOT drive with your foot resting on
the brake pedal. Even light, but constant
pedal pressure can result in the brakes
overheating, brake wear, and possibly
even brake failure.
If a tyre goes flat whilst you are driving,
apply the brakes gently and keep the
vehicle pointed straight ahead whilst you
slow down. When you are moving slowly
enough for it to be safe to do so, pull off
the road and stop in a safe location.
Keep your foot firmly on the brake pedal
when the vehicle is stopped to prevent
the vehicle from rolling forward.
Page 347 of 649
7
Driving SafetyForward Collision–Avoidance Assist (FCA) (front view camera only) ..................... 7-2
Forward Collision–Avoidance Assist (FCA) (Sensor fusion) ................................... 7-15
Lane Keeping Assist (LKA) .......................................................................................7-30
Blind-Spot Collision Warning (BCW)....................................................................... 7-37
Blind-Spot Collision-Avoidance Assist (BCA) ......................................................... 7-47
Safe Exit Warning (SEW) ......................................................................................... 7-60
Manual Speed Limit Assist (MSLA) ........................................................................ 7-66
Intelligent Speed Limit Assist (ISLA) ....................................................................... 7-70
Driver Attention Warning (DAW) ............................................................................. 7-75
Driving ConvenienceCruise Control (CC) .................................................................................................. 7-81
Smart Cruise Control (SCC) .................................................................................... 7-85
Navigation-Based Smart Cruise Control (NSCC) .................................................. 7-101
Lane Following Assist (LFA) ................................................................................... 7-108
Parking SafetyRear View Monitor (RVM) ....................................................................................... 7-112
Rear Cross-Traffic Collision Warning (RCCW) ....................................................... 7-116
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)......................................... 7-124
Reverse Parking Distance Warning (PDW) ........................................................... 7-135
Forward/Reverse Parking Distance Warning (PDW) ............................................ 7-138
Reverse Parking Collision-Avoidance Assist (PCA) .............................................. 7-143
Parking Assist (PA) ................................................................................................... 7-151
Declaration of conformity ........................................................................... 7-168
7. Driver assistance system