vehicle settings HYUNDAI I20 2023 Owner's Manual
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2023, Model line: I20, Model: HYUNDAI I20 2023Pages: 649, PDF Size: 12.35 MB
Page 261 of 649
5-120
Convenient features
8 V L Q J D % O X H W R R W K D X G L R G H Y L F H
You can listen to music stored in the
connected Bluetooth audio device via
your vehicle’s speakers.
1. On the control panel, press the
[AUDIO] button.
2. When the mode selection window
displays, turn the [ 7 8 1 (] knob to
select % O X H W R R W K D X G L R and then press
the knob.
(1) Information about the song currently
playing
1. Press the [ 0 ( 1 8 & / 2 & .] button
on the control panel to access the
following a menu option.
2. Turn the [ 7 8 1 (] knob to select option
and then press the knob.
[ 6 R X Q G V H W W L Q J V: You can change
the settings related to sounds, such
as location where sound will be
concentrated and the output level
for each range.
- % D O D Q F H: Select a location where
sound will be concentrated in the
vehicle. Select % D O D Q F H, turn the
[ 7 8 1 (] knob to select the desired
position, and then press the knob.
To set sound to be centred in the
vehicle, select & H Q W U H.
- ( T X D O L V H U: Adjust the output level
for each sound tone mode.
- 6 S H H G G H S H Q G H Q W Y R O : Set
the volume to be adjusted
automatically according to your
driving speed.
NOTICE
[ ' H S H Q G L Q J R Q Y H K L F O H P R G H O V R U
V S H F L I L F D W L R Q V D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ ' H S H Q G L Q J R Q W K H V \ V W H P R U
D P S O L I L H U V S H F L I L F D W L R Q V D S S O L H G W R
\ R X U Y H K L F O H D Y D L O D E O H R S W L R Q V P D \
Y D U \
[ 0 R G H S R S X S: Set to display mode
selection window when the [AUDIO]
button is pressed on the control
panel.
[ ' D W H 7 L P H: You can change the
date and time that are shown on the
system display.
- 6 H W G D W H: Set date to display on
the system display.
-Set time: Set time to display on
the system display.
- 7 L P H I R U P D W: Select to display
time in the 12 hour format or the
24 hour format.
- ' L V S O D \ 3 R Z H U 2 I I : Set to display
the clock when the system power
is off.
[ / D Q J X D J H: You can change the
display language.
Page 352 of 649
Driver assistance system
7-6
OBC3070003
Emergency braking
[ To warn the driver that emergency
braking will occur, the ‘Emergency
% U D N L Q JT Z D U Q L Q J P H V V D J H Z L O O D S S H D U
on the cluster and an audible warning
will sound and the steering wheel will
vibrate. (if equipped).
[ If a vehicle is detected in front,
the function will operate when
your vehicle speed is between
approximately 6~37 mph (10~60
km/h).
[ If a pedestrian or cyclist is detected
in front, the function will operate
when your vehicle speed is between
approximately 6~37 mph (10~60
km/h).
[ In emergency braking situation,
braking is assisted with strong braking
power by the function to help prevent
collision with the vehicle, pedestrian
or cyclist ahead.
OBC3070004
Stopping vehicle and ending brake
control
[ When the vehicle is stopped due
to emergency braking, the ‘Drive
F D U H I X O O \T Z D U Q L Q J P H V V D J H Z L O O D S S H D U
on the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
[ Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
WARNING
Take the following precautions when
using Forward Collision-Avoidance
Assist:
[ For your safety, change the Settings
after parking the vehicle at a safe
location.
[ With ‘Active Assist’ or ‘Warning Only’
selected, when ESC is turned off by
pressing and holding the ESC OFF
button for more than 3 seconds,
Forward Collision-Avoidance Assist
will turn off automatically. In this
case, the function cannot be set
from the Settings menu and the
warning light will illuminate on the
cluster which is normal. If ESC is
turned on by pressing the ESC OFF
button, Forward Collision-Avoidance
Assist will maintain the last setting.
Page 368 of 649
Driver assistance system
7-22
WARNING
Take the following precautions when
using Forward Collision-Avoidance
Assist:
[ For your safety, change the Settings
after parking the vehicle at a safe
location.
[ With ‘Active assist’ or ‘Warning only’
selected, when ESC is turned off by
pressing and holding the ESC OFF
button, Forward Collision-Avoidance
Assist will turn off automatically.
In this case, the function cannot be
set from the Settings menu and the
warning light will illuminate on
the cluster which is normal. If ESC is
turned on by pressing the ESC OFF
button, Forward Collision-Avoidance
Assist will maintain the last setting.
[ Forward Collision-Avoidance Assist
does not operate in all situations or
cannot avoid all collisions.
[ The driver should hold the
responsibility to control the vehicle.
Do not solely depend on Forward
Collision-Avoidance Assist. Rather,
maintain a safe braking distance, and
if necessary, depress the brake pedal
to reduce driving speed or to stop the
vehicle.
[ Never deliberately operate Forward
Collision-Avoidance Assist on people,
animal, objects, etc. It may cause
serious injury or death.
[ Forward Collision-Avoidance
Assist may not operate if the driver
depresses the brake pedal to avoid
collision.[ Depending on the road and driving
conditions, Forward Collision-
Avoidance Assist may warn the driver
late or may not warn the driver.
[ During Forward Collision-Avoidance
Assist operation, the vehicle may
stop suddenly injuring passengers
and shifting loose objects. Always
have the seat belt on and keep loose
objects secured.
[ If any other function’s warning
message is displayed or audible
warning is generated, Forward
Collision-Avoidance Assist warning
message may not be displayed
and audible warning may not be
generated.
[ You may not hear the warning sound
of Forward Collision-Avoidance Assist
if the surrounding is noisy.
[ Forward Collision-Avoidance
Assist may turn off or may not
operate properly or may operate
unnecessarily depending on the road
conditions and the surroundings.
WARNING
[ Even if there is a problem with
Forward Collision-Avoidance
Assist, the vehicle’s basic braking
performance will operate normally.
[ During emergency braking,
braking control by the function will
automatically cancel when the driver
excessively depresses the accelerator
pedal or sharply steers the vehicle.
Page 384 of 649
![HYUNDAI I20 2023 Owners Manual Driver assistance system
7-38
Detecting sensor
OBC3070018
[1] : Rear corner radar
Refer to the picture above for the
detailed location of the detecting sensor.
CAUTION
Take the following precaution](/img/35/56129/w960_56129-383.png "HYUNDAI I20 2023 Owners Manual Driver assistance system
7-38
Detecting sensor
OBC3070018
[1] : Rear corner radar
Refer to the picture above for the
detailed location of the detecting sensor.
CAUTION
Take the following precaution")
Driver assistance system
7-38
Detecting sensor
OBC3070018
[1] : Rear corner radar
Refer to the picture above for the
detailed location of the detecting sensor.
CAUTION
Take the following precautions to
maintain optimal performance of the
detecting sensor:
[ Never disassemble the rear corner
radar or radar assembly, or apply any
impact on it.
[ If the rear corner radars have been
replaced or repaired, we recommend
that the vehicle be inspected by a
HYUNDAI authorised repairer.
[ If there is impact on the rear corner
radar or near the radar, even though
the warning message does not
appear on the cluster, Blind-Spot
Safety system may not operate
properly. We recommend that the
function be inspected by a HYUNDAI
authorised repairer.
[ Use only genuine parts to repair the
rear bumper where the rear corner
radar is located.
[ Do not apply license plate frame or
objects, such as a bumper sticker,
film or a bumper guard near the rear
corner radar.[ The function may not work properly if
the bumper has been replaced, or the
surroundings of the rear corner radar
has been damaged or paint has been
applied.
[ If a trailer, carrier, etc. is installed,
it may adversely affect the
performance of the rear corner radar
or the function may not operate.
Blind-Spot Collision Warning
settings
Setting features
OTM070202L
Blind-spot safety
With the engine on, select or deselect
S ' U L Y H U D V V L V W D Q F H
Page 388 of 649
Driver assistance system
7-42
WARNING
Take the following precautions when
using Blind-Spot Safety system:
[ For your safety, change the Settings
after parking the vehicle at a safe
location.
[ If any other function’s warning
message is displayed or audible
warning is generated, Blind-Spot
Safety system’s warning message
may not be displayed and audible
warning may not be generated.
[ You may not hear the warning sound
of Blind-Spot Safety system if the
surrounding is noisy.
[ Blind-Spot Safety system may warn
the driver late or may not warn the
driver depending on the road and
driving conditions.
[ Driver should maintain control of the
vehicle at all times. Do not depend on
Blind-Spot Safety system.
[ Never operate Blind-Spot Safety
system on people, animal, objects,
etc. It may cause serious injury or
death.
Blind-Spot Collision Warning
malfunction and limitations
Blind-Spot Collision Warning
malfunction
OTM070099L
When Blind-Spot Safety system is not
working properly, the ‘Check Blind-
6 S R W 6 D I H W \ V \ V W H PT Z D U Q L Q J P H V V D J H
will appear on the cluster for several
seconds, and the master (
) warning
light will illuminate on the cluster.
We recommend that the system be
inspected by a HYUNDAI authorised
repairer.
OTM070100L
When the outside rearview mirror
warning light is not working properly,
the ‘Check side view mirror warning
O L J K WT R U S & K H F N R X W V L G H P L U U R U Z D U Q L Q J
L F R QT Z D U Q L Q J P H V V D J H Z L O O D S S H D U R Q
the cluster for several seconds, and the
master (
) warning light will illuminate
on the cluster. We recommend that the
function be inspected by a HYUNDAI
authorised repairer.
Page 395 of 649
07
7-49 [ If the rear corner radars have been
replaced or repaired, we recommend
that the vehicle be inspected by a
HYUNDAI authorised repairer.
[ Use only genuine parts to repair the
rear bumper where the rear corner
radar is located.
[ Do not apply license plate frame or
objects, such as a bumper sticker,
film or a bumper guard near the rear
corner radar.
[ The function may not work properly if
the bumper has been replaced, or the
surroundings of the rear corner radar
has been damaged or paint has been
applied.
[ If a trailer, carrier, etc. is installed,
it may adversely affect the
performance of the rear corner radar
or the function may not operate.
For more details on the precautions
of the front view camera, refer to
“Forward Collision-Avoidance Assist
(FCA)” section in chapter 7.
Blind-Spot Collision-Avoidance
Assist settings
Setting features
OTM070096L
Blind-spot safety
With the engine on, select or deselect
S ' U L Y H U D V V L V W D Q F H
Page 398 of 649
Driver assistance system
7-52
Blind-Spot Collision-Avoidance
Assist operation
Warning and control
ORG3070025
Vehicle detection
[ To warn the driver a vehicle is
detected, the warning light on the
outside rearview mirror will illuminate.
[ The function will operate when your
vehicle speed is above 12 mph (20
km/h) and the speed of the vehicle in
the blind spot area is above 7 mph (10
km/h).
Collision Warning
[ Collision warning will operate when
the turn signal is turned on in the
direction of the detected vehicle.
[ , I S : D U Q L Q J R Q O \T L V V H O H F W H G I U R P W K H
Settings menu, the collision warning
will operate when your vehicle
approaches the lane the blind spot
vehicle is detected.
[ To warn the driver of a collision, the
warning light on the outside rearview
mirror will blink. At the same time,
an audible warning will sound and
the steering wheel will vibrate (if
equipped).
[ When the turn signal is turned off or
you move away from the lane, the
collision warning will be canceled
and the function will return to vehicle
detection state.
WARNING
[ The detecting range of the rear
corner radar is determined by a
standard road width, therefore, on a
narrow road, the function may detect
other vehicles in the next next lane
and warn you. In contrast, on a wide
road, the function may not be able to
detect a vehicle driving in the next
lane and may not warn you.
[ When the hazard warning flasher is
on, the collision warning by the turn
signal will not operate.
Information
If the driver's seat is on the left side, the
collision warning may occur when you
turn left. Maintain a proper distance with
the vehicles in the left lane. If the driver's
seat is on the right side, the collision
warning may occur when you turn right.
Maintain a proper distance with the
vehicles in the right lane.
Page 401 of 649
07
7-55
WARNING
Take the following precautions when
using Blind-Spot Safety system:
[ For your safety, change the Settings
after parking the vehicle at a safe
location.
[ If any other function’s warning
message is displayed or audible
warning is generated, Blind-Spot
Safety system’s warning message
may not be displayed and audible
warning may not be generated.
[ You may not hear the warning sound
of Blind-Spot Safety system if the
surrounding is noisy.
[ Blind-Spot Safety system may not
operate if the driver applies the brake
pedal to avoid collision.
[ When Blind-Spot Safety system
is operating, braking control by
the function will automatically
cancel when the driver excessively
depresses the accelerator pedal or
sharply steers the vehicle.
[ During Blind-Spot Safety system
operation, the vehicle may stop
suddenly injuring passengers and
shifting loose objects. Always have
the seat belt on and keep loose
objects secured.
[ Even if there is a problem with Blind-
Spot Safety system, the vehicle’s
basic braking performance will
operate normally.
[ Blind-Spot Safety system does not
operate in all situations or cannot
avoid all collisions. [ Blind-Spot Safety system may warn
the driver late or may not warn the
driver depending on the road and
driving conditions.
[ Driver should maintain control of the
vehicle at all times. Do not depend on
Blind-Spot Safety system. Maintain
a safe braking distance, and if
necessary, depress the brake pedal
to reduce driving speed or to stop the
vehicle.
[ Never operate Blind-Spot Safety
system on people, animal, objects,
etc. It may cause serious injury or
death.
WARNING
The brake control may not operate
properly depending on the status of
ESC (Electronic Stability Control).
There will only be a warning when:
- The ESC (Electronic Stability Control)
warning light is on
- ESC (Electronic Stability Control) is
engaged in a different function
Page 409 of 649
07
7-63
Safe Exit Warning operation
Safe Exit Warning warning
OBC3070007
Collision warning when exiting vehi-
cle
[ When an approaching vehicle from the
rear is detected at the moment a door
L V R S H Q H G W K H S : D W F K R X W I R U W U D I I L FT
warning message will appear on the
cluster, and an audible warning will
sound.
[ Safe Exit Warning will warn the driver
when your vehicle speed is below 2
mph (3 km/h), and the speed of the
approaching vehicle from the rear is
above 3 mph (6 km/h).
WARNING
Take the following precautions when
using Safe Exit Warning:
[ For your safety, change the Settings
after parking the vehicle at a safe
location.
[ If any other function’s warning
message is displayed or audible
warning is generated, Safe Exit
Warning warning message may not
be displayed and audible warning
may not be generated.
[ You may not hear the warning
sound of Safe Exit Warning if the
surrounding is noisy. [ Safe Exit Warning does not operate
in all situations or cannot prevent all
collisions.
[ Safe Exit Warning may warn the
driver late or may not warn the driver
depending on the road and driving
conditions. Always check vehicle
surroundings.
[ The driver and passengers are
responsible for accidents that occurs
whilst exiting the vehicle. Always
check the surroundings before you
exit the vehicle.
[ Never deliberately operate Safe
Exit Warning. Doing so may lead to
serious injury or death.
[ Safe Exit Warning does not operate
if there is a problem with Blind-Spot
Safety system. The warning message
of Blind-Spot Safety system will
appear when:
- Blind-Spot Safety system sensor or
the sensor surrounding is polluted
or covered
- Blind-Spot Safety system fails to
warn passengers or falsely warn
passengers
Information
After the engine is turned off, Safe Exit
Warning operates approximately for 3
minutes, but turns off immediately if the
doors are locked.
Page 421 of 649
07
7-75 Basic function
Driver Attention Warning will help
determine the driver's attention level by
analyzing driving pattern, driving time,
etc. whilst vehicle is being driven. The
function will recommend a break when
W K H G U L Y H UT V D W W H Q W L R Q O H Y H O I D O O V E H O R Z D
certain level.
Leading Vehicle Departure Alert
function
Leading Vehicle Departure Alert function
will inform the driver when the front
vehicle departs from a stop.
Detecting sensor
OBC3070001
[1] : Front view camera
The front view camera is used to detect
driving patterns and front vehicle
departure whilst vehicle is being driven.
Refer to the picture above for the
detailed location of the detecting sensor.
CAUTION
Always keep the front view camera in
good condition to maintain optimal
performance of Driver Attention
Warning.
For more details on the precautions
of the front view camera, refer to
“Forward Collision-Avoidance Assist
(FCA)” section in chapter 7.
Driver Attention Warning
settings
Setting features
OTM070188L
DAW (Driver Attention Warning)
With the engine on, select or deselect
S ' U L Y H U $ V V L V W D Q F H