fog light HYUNDAI I20 2023 Owners Manual
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2023, Model line: I20, Model: HYUNDAI I20 2023Pages: 649, PDF Size: 12.35 MB
Page 15 of 649
2-4
Vehicle information
1. Hood .............................................................................................................................................. 5-36
2. Headlight ..................................................................................................................................... 9-60
3. Front fog light ............................................................................................................................. 9-64
4. Tires and wheels .......................................................................................................................... 9-33
5. Outside rearview mirror .............................................................................................................. 5-24
6. Front windshield wiper blades ................................................................................................... 9-27
7. Windows ....................................................................................................................................... 5-27
8. Front ultrasonic sensors .............................................................................................................7-138
The actual shape may differ from the illustration.
OBC3TN011001
„Front view [ 1 O L Q H
Page 16 of 649
2-5
02
1. Antenna .........................................................................................................................................5-94
2. Doors..............................................................................................................................................5-13
3. Fuel filler door .............................................................................................................................. 5-39
4. Rear ultrasonic sensors ..............................................................................................................7-138
5. High mounted stop light ............................................................................................................. 9-77
6. Rear view camera ........................................................................................................................7-112
7. Rear window wiper blade ............................................................................................................9-28
8. Tailgate ......................................................................................................................................... 5-37
9. Rear fog light................................................................................................................................ 9-73
The actual shape may differ from the illustration.
OBC3TN011002
„Rear view [ 1 O L Q H
Page 27 of 649
2-16
Vehicle information
BULB WATTAGE
Light bulb Bulb type Wattage
FrontType AHeadlight (Low/High) H19 60/55
Turn signal light PY21W 21
Position light (if equipped) W5W 5
Type BHeadlight (High/Low) LED LED
Turn signal light LED LED
Day running light &
Position light (DRL&PSTN)LED LED
Static bending lamp LED LED
Daytime running light (Bulb) P21W 21
Daytime running light (LED) LED LED
Side repeater lamp WY5W 5
Fog light (if equipped) HB4 51
RearType ATail light W5W 5
Tail/Stop light P21/5W 5/21
Turn signal light PY21W 21
Type BTail light LED LED
Stop light LED LED
Turn signal light PY21W 21
Back up light W16W 16
Back up light P21W 21
Fog light P21W 21
High mounted stop light W5W 5
License plate light W5W 5
InteriorRoom lamp W5W 5
Map light FESTOON 8
Luggage room light FESTOON 10
Type A : MFR (Multi Focus Reflector) Headlight
Page 114 of 649
4-19
04
High Beam Assist
indicator light (if
equipped)
7 K L V L Q G L F D W R U O L J K W L O O X P L Q D W H V
When the high-beam is on with the light
switch in the AUTO position.
If your vehicle detects oncoming or
preceding vehicles, High Beam Assist
will switch the high beam to low beam
automatically.
For more details, refer to “High Beam
Assist (HBA)” section in chapter 5.
Light ON indicator light
7 K L V L Q G L F D W R U O L J K W L O O X P L Q D W H V
When the tail lights is on.
Front fog indicator light
(if equipped)
7 K L V L Q G L F D W R U O L J K W L O O X P L Q D W H V
When the front fog lights are on.
Rear fog indicator light
(if equipped)
7 K L V L Q G L F D W R U O L J K W L O O X P L Q D W H V
When the rear fog lights are on.
Forward Safety warning
light (if equipped)
7 K L V L Q G L F D W R U O L J K W L O O X P L Q D W H V
[ When you set the ignition switch or
Engine Start/Stop button to the ON
position.
- The Forward Safety warning light
illuminates for approximately 3
seconds and then goes off.
[ Whenever there is a malfunction with
Forward Collision-Avoidance Assist.
If this occurs, we recommend that
you have the vehicle inspected by a
HYUNDAI authorised repairer.
For more details, refer to “Forward
Collision-Avoidance Assist (FCA)”
section in chapter 7.
Lane Safety indicator
light (if equipped)
7 K L V L Q G L F D W R U O L J K W L O O X P L Q D W H V
[ [Green] When the function operating
conditions are satisfied.
[ [White] The function operating
conditions are not satisfied.
[ [Yellow] Whenever there is a
malfunction with Lane Keeping Assist.
If this occurs, we recommend that
you have the vehicle inspected by a
HYUNDAI authorised repairer.
For more details, refer to “Lane Keeping
Assist (LKA)” section in chapter 7.
Page 183 of 649
5-42
Convenient features
Lighting control
OPDE046065
To operate the lights, turn the knob at
the end of the control lever to one of the
following positions:
(1) OFF (O) position
(2) AUTO light position (if equipped)
(3) Position light position
(4) Headlight position
OBC3050029
$ 8 7 2 O L J K W S R V L W L R Q L I H T X L S S H G
When the light switch is in the AUTO
position, the position light and headlight
will be turned ON or OFF automatically
depending on the amount of light
outside the vehicle.
Even with the AUTO light feature
in operation, it is recommended to
manually turn ON the lights when driving
at night or in a fog, or when you enter
dark areas, such as tunnels and parking
facilities.
NOTICE
[ ' R Q R W F R Y H U R U V S L O O D Q \ W K L Q J R Q W K H
sensor (1) located on the instrument
panel.
[ ' R Q R W F O H D Q W K H V H Q V R U X V L Q J
a window cleaner, the cleanser
may leave a light film which could
interfere with sensor operation.
[ , I \ R X U Y H K L F O H K D V Z L Q G R Z W L Q W R U
other types of metallic coating on
the front windscreen, the AUTO light
system may not work properly.
EXTERIOR LIGHTS
Page 186 of 649
5-45
05
Front fog light (if equipped)
OPDE046066
Fog lamps are used to provide improved
visibility when visibility is poor due to
fog, rain or snow, etc. Use the switch
next to the headlamp switch to turn the
fog lamps ON and OFF.
1. Turn on the position lamp.
2. Turn the light switch (1) to the front
fog lamp position.
3. To turn off the front fog lamp, turn
the light switch to the front fog lamp
position again or turn off the position
lamp.
NOTICE
When in operation, the fog lights
consume large amounts of vehicle
electrical power. Only use the fog lights
when visibility is poor.
Rear fog light
OPDE046064
To turn on the rear fog lamp:
Position the light switch in the position
lamp position, turn the light switch (1)
to the front fog lamp position, and then
turn the light switch (1) to the rear fog
lamp position.
To turn the rear fog lamps off, do one of
the following:
[ Turn off the position light switch.
[ Turn the light switch to the rear fog
lamp position again.
[ When the light switch is in the position
lamp position, if you turn off the front
fog lamp, the rear fog lamp will also
turn off.
Page 187 of 649
5-46
Convenient features
OAC3059027TU
Vehicle without front fog lamp
To turn on the rear fog lamp:
Position the light switch in the headlamp
position, and then turn the light switch
(1) to the rear fog lamp position.
To turn the rear fog lamps off, do one of
the following:
[ Turn off the headlamp switch.
[ Turn the light switch to the rear fog
lamp position again.
Battery saver function
The purpose of this feature is to prevent
the battery from being discharged.
The system automatically turns off the
position lamp when the driver turns the
engine off and opens the driver-side
door.
With this feature, the position lamps will
turn off automatically if the driver parks
on the side of road at night.
If necessary, to keep the lamps on when
the engine is turned off, perform the
following:
1) Open the driver-side door.
2) Turn the position lamps OFF and ON
again using the light switch on the
steering column.
Headlamps delay function
(if equipped)
If you place the ignition switch in the
ACC or OFF position with the headlamps
ON, the headlamps (and/or position
lamps) remain on for about 5 minutes.
However, with the engine off if the
G U L Y H UT V G R R U L V R S H Q H G D Q G F O R V H G W K H
headlamps (and/or position lamps) are
turned off after 15 seconds.
The headlamps (and/or position lamps)
can be turned off by pressing the lock
button on the remote key or smart
key twice or turning the light switch to
the OFF or AUTO position. However, if
you turn the light switch to the AUTO
position when it is dark outside, the
headlamps will not be turned off.
Page 191 of 649
5-50
Convenient features
- If the light switch is pushed away
when High Beam Assist is operating,
High Beam Assist will turn off.
- If the light switch is pulled towards
you when the high beam is off, the
high beam will turn on. When you let
go of the light switch, the lever will
move to the middle and the high beam
will turn off.
- If the light switch is pulled towards
you when the high beam is on by High
Beam Assist, and High Beam Assist
will turn off.
- If the light switch is placed to the
headlight position (
), High Beam
Assist will turn off and the low beam
will be on continuously.
When High Beam Assist is operating, the
high beam switches to low beam in the
following conditions.
- When the headlight of an on-coming
vehicle is detected.
- When the tail light of a vehicle in front
is detected.
- When the headlight or tail light of a
motorcycle or a bicycle is detected.
- When the surrounding ambient light is
bright enough that high beams are not
required.
- When streetlights or other lights are
detected.
- When the light switch is not in the
AUTO position.
- When High Beam Assist is off.
- When the vehicle speed is below 19
mph (30 km/h).
System malfunction and
limitations
System malfunction
OTM050218L
When High Beam Assist is not working
properly, the warning message will come
on for a few seconds. After the message
disappears, the master warning light
(
) will illuminate.
We recommend that you take your
vehicle to a HYUNDAI authorised
repairer and have the system checked.
CAUTION
The system may not operate normally if
any of the following conditions should
occur:
1. When the illumination from an
on-coming vehicle or a vehicle in
front is dim. Such examples may
include:
[ When the headlights of an oncoming
vehicle or the tail lights of a vehicle
in front is covered with dust, snow,
or water
[ When the headlights on an
R Q F R P L Q J Y H K L F O H D U H 2 ) ) E X W W K H
fog lights are ON)
Page 192 of 649
5-51
05
2. When the front view camera is
adversely affected by an external
condition. Such examples may
include:
[ When the vehicle’s headlights have
been damaged or not repaired
properly
[ When the vehicle headlights are not
aimed properly
[ When the vehicle is driven on a
narrow curved road or rough road
[ When the vehicle is driven on an
uphill road or downhill road
[ When only part of the vehicle in front
is visible on a crossroad or curved
road
[ When there is a traffic light,
reflecting sign, flashing sign or mirror
[ When the road conditions are bad
such as being wet or covered with
snow
[ When a vehicle suddenly appears
from a curve
[ When the vehicle is tilted from a flat
tyre or being towed
[ : K H Q / D Q H . H H S L Q J $ V V L V W V \ V W H P
warning light illuminates
[ When the light from the oncoming or
front vehicle is not detected because
of exhaust fume, smoke, fog, snow,
etc.
[ When the front window is covered
with foreign matters such as ice,
dust, fog, or is damaged
3. When the forward visibility is poor.
Such examples may include:
[ When the headlights of an oncoming
vehicle or a vehicle in front is not
detected due to poor outside
visibility (smog, smoke, dust, fog,
heavy rain, snow, etc.)
[ When the windscreen visibility is
poor WARNING
[ 7 K H I X Q F W L R Q P D \ Q R W Z R U N D U R X Q G
seconds after starting the vehicle or
the initialization or rebooting of the
front view camera.
[ ' R Q R W D W W H P S W W R G L V D V V H P E O H
the front view camera without the
assistance of a HYUNDAI authorised
repairer technician.
If the front view camera is removed
for any reason, the system may need
to be re-calibrated. We recommend
that the system be inspected by a
HYUNDAI authorised repairer.
[ , I W K H Z L Q G V F U H H Q R I \ R X U Y H K L F O H
is replaced, most likely the front
view camera will need to be
re-calibrated. If this occurs, have
your vehicle inspected and have the
system re-calibrated by a HYUNDAI
authorised repairer.
[ % H F D U H I X O W K D W Z D W H U G R H V QT W J H W L Q W R
front view camera unit and do not
remove or damage related parts of
High Beam Assist system.
[ ' R Q R W S O D F H R E M H F W V R Q W K H F U D V K
pad that reflect light such as mirrors,
white paper, etc. The system may
malfunction if sunlight is reflected.
[ $ W W L P H V + L J K % H D P $ V V L V W P D \
not work properly. The system is
for your convenience only. It is the
responsibility of the driver for safe
driving practices and always check
the road conditions for your safety.
[ : K H Q W K H V \ V W H P G R H V Q R W R S H U D W H
normally, change the light position
manually between the high beam and
low beam.
Page 213 of 649
5-72
Convenient features
Air conditioning
OBC3050116R
Push the A/C button to manually turn
the air conditioning system on (indicator
light will illuminate).
Push the button again to turn the air
conditioning system off.
OFF mode
OBC3050117R
Push the OFF button of the front to turn
off the climate control system.
You can still operate the air intake
buttons as long as the ignition switch is
in the ON position.
However, the air climate control system
turns on when you push the mode
selection buttons.
System operation
Ventilation
1. Select the Face Level mode.
2. Set the air intake control to fresh
mode.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
Heating
1. Select the Floor Level mode.
2. Set the air intake control to fresh
mode.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
5. If desired, turn the air conditioning ON
with the temperature control knob set
to heat in order to dehumidify the air
before it enters into the cabin.
If the windscreen fogs up, select the
Floor & Defrost
mode or press the
Front Defrost mode.