weight HYUNDAI I20 2023 Owners Manual
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2023, Model line: I20, Model: HYUNDAI I20 2023Pages: 649, PDF Size: 12.35 MB
Page 10 of 649

01
Use of MTBE
HYUNDAI recommends avoiding fuels containing MTBE (Methyl Tertiary Butyl Ether)
over 15.0% vol. (Oxygen Content 2.7% weight) in your vehicle.
Fuel containing MTBE over 15.0% vol. (Oxygen Content 2.7% weight) may reduce
vehicle performance and produce vapour lock or hard starting.
CAUTION
Your New Vehicle Limited Warranty may not cover damage to the fuel system and
any performance problems that are caused by the use of fuels containing methanol
or fuels containing MTBE (Methyl Tertiary Butyl Ether) over 15.0% vol. (Oxygen
Content 2.7% weight.)
Do not use methanol
Fuels containing methanol (wood alcohol) should not be used in your vehicle. This
type of fuel can reduce vehicle performance and damage components of the fuel
system, engine control system and emission control system.
Fuel Additives
HYUNDAI recommends that you use unleaded petrol which has an octane rating of
RON (Research Octane Number) 95 / AKI (Anti Knock Index) 91 or higher (for Europe)
or Octane Rating of RON (Research Octane Number) 91 / AKI (Anti-Knock Index) 87 or
higher (except Europe).
For customers who do not use good quality petrols including fuel additives
regularly, and have problems starting or the engine does not run smoothly, one
bottle of additive added to the fuel tank according to the maintenance schedule is
recommended.
Additives are available from your HYUNDAI authorised repairer along with information
on how to use them. Do not mix other additives.
Operation in foreign countries
If you are going to drive your vehicle in another country, be sure to:
[ 2 E V H U Y H D O O U H J X O D W L R Q V U H J D U G L Q J U H J L V W U D W L R Q D Q G L Q V X U D Q F H
[ ' H W H U P L Q H W K D W D F F H S W D E O H I X H O L V D Y D L O D E O H
Page 12 of 649

Exterior overview (I) ....................................................................................... 2-2
Exterior overview (II) ...................................................................................... 2-3
Interior overview ............................................................................................ 2-8
Instrument panel overview ..........................................................................2-10
Engine compartment .................................................................................... 2-12
Dimensions .................................................................................................... 2-15
Engine specification ..................................................................................... 2-15
Bulb wattage ................................................................................................. 2-16
Tyres and wheels ........................................................................................... 2-17
Air conditioning system ................................................................................2-18
Tyre load and speed capacity ......................................................................2-18
Gross vehicle weight..................................................................................... 2-19
Luggage volume ........................................................................................... 2-19
Recommended lubricants and capacities ................................................. 2-20
Recommended SAE viscosity number ................................................................. 2-22
Vehicle Identification Number (VIN) .......................................................... 2-23
Vehicle certification label ............................................................................ 2-23
Tyre specification and pressure label ......................................................... 2-24
Engine number ............................................................................................. 2-24
Air conditioner compressor label ............................................................... 2-25
Fuel label ...................................................................................................... 2-25
Declaration of conformity ........................................................................... 2-26
2. Vehicle information
2
Page 29 of 649

2-18
Vehicle information
AIR CONDITIONING SYSTEM
TYRE LOAD AND SPEED CAPACITY
ItemWeight of volume Classification
Refrigerant
g (oz.)470 ± 25 g (15.17 ± 0.8) R-1234yf
500 ± 25 g (16.07 ± 0.8) R-134a
Compressor lubricant
g (oz.)100 (3.52) PAG
Contact a HYUNDAI authorised repairer for more details.
ItemTyre size Wheel sizeLoad capacity Speed capacity
LI *1kg SS *2mph
(km/h)
Full size tyre185/65R15
(5DR/CUV)6.0J X 15 88 560 H 130 (210)
195/55R16
(5DR/CUV)6.0J X 16 87 545 H 130 (210)
215/45R17
(5DR/N-line)7.0J X 17 91 615V 149 (240)
Y 186 (300)
205/55R17
(CUV)6.5Jx17 91 615 V 240
Temporary tyreT125/80D15 3.5J X 15 90 690 M 80 (130)
T125/80D16
(CUV)4.0T X 16 97 730 M 130
*1 LI : LOAD INDEX
*2 SS : SPEED SYMBOL
Page 30 of 649

2-19
02
LUGGAGE VOLUME GROSS VEHICLE WEIGHT
lbs. (kg)
Smartstream G 1.0
T-GDiSmartstream G 1.0
T-GDi (48V) MHEVSmartstream
G 1.2Petrol 1.4
6 M/T 7 DCT 6 M/T 7 DCT 5 M/T 6 M/T 6 A/T
3,527
(1,600)3,593
(1,630)3,571
(1,620)3,637
(1,650)3,417
(1,550)3,439
(1,560)3,505
(1,590)
- CUV
Smartstream G 1.0
T-GDiSmartstream G 1.0
T-GDi (48V)Smartstream
G 1.2 Gasoline 1.4
6 M/T 7 DCT 6 M/T 7 DCT 5 M/T 6 M/T 6 A/T
1630
(3,593)1660
(3,659)1660
(3,659)1680
(3,545)1580
(3,483)1590
(3,505)1620
(3,571)
M/T : Manual transmission
A/T : Automatic transmission
DCT : Dual clutch transmission
VDA
l (cu ft)MIN. 352 (12.4) /401(14.16)*
MAX. 1,165 (41.14) /1205(42.55)*
Min : Behind rear seat to upper edge of the seat back.
Max : Behind front seat to roof.
* : CUV
Page 65 of 649

3-28
Safety system
Seat belt use and children
Infant and small children
Most countries have Child Restraint
Systems laws which require children
to travel in approved Child Restraint
Systems devices, including booster
seats. The age at which seat belts can be
used instead of Child Restraint Systems
differs among countries, so you should
be aware of the specific requirements
in your country, and where you are
travelling. Infant and Child Restraint
Systems must be properly placed and
installed in a rear seat. For more details,
refer to the “Child Restraint Systems” in
this chapter.
WARNING
ALWAYS properly restrain infants and
small children in a Child Restraint System
appropriate for the child’s height and
weight.
To reduce the risk of serious injury or
death to a child and other passengers,
NEVER hold a child in your lap or arms
when the vehicle is moving. The violent
forces created during an accident will
tear off the child from your arms and
throw the child against the interior of the
vehicle.
Small children are best protected from
injury in an accident when properly
restrained in the rear seat by a Child
Restraint System that meets the
requirements of the Safety Standards of
your country. Before buying any Child
Restraint System, make sure that it has
a label certifying that it meets Safety
Standard of your country. The restraint
must be appropriate for your child’s
height and weight. Check the label
on the Child Restraint System for this
information. Refer to “Child Restraint
Systems” in this chapter.
Larger children
Children under age 13 and who are too
large for a booster seat must always
occupy the rear seat and use the
available lap/shoulder belts. A seat belt
should lie across the upper thighs and
be snug across the shoulder and chest
to restrain the child safely. Check belt fit
periodically. A child’s squirming could
put the belt out of position. Children are
afforded the most safety in the event of
an accident when they are restrained by
a proper restraint system and/or seat
belts in the rear seat.
If a larger child over age 13 must be
seated in the front seat, the child must
be securely restrained by the available
lap/shoulder belt and the seat should be
placed in the rearmost position.
If the shoulder belt portion slightly
touches the child’s neck or face, try
placing the child closer to the centre
of the vehicle. If the shoulder belt still
touches their face or neck, they need to
be returned to an appropriate booster
seat in the rear seat.
WARNING
[ Always make sure larger children’s
seat belts are worn and properly
adjusted.
[ NEVER allow the shoulder belt to
contact the child’s neck or face.
[ Do not allow more than one child to
use a single seat belt.
Page 68 of 649

3-31
03
Child Restraint System (CRS) always
in the rear
Infants and younger children must be
restrained in an appropriate rearward-
facing or forward-facing CRS that has
first been properly secured to the rear
seat of the vehicle. Read and comply
with the instructions for installation and
use provided by the manufacturer of the
Child Restraint System.
WARNING
[ Always follow the Child Restraint
System manufacturer’s instructions
for installation and use.
[ Always properly restrain your child in
the Child Restraint System.
[ Do not use an infant carrier or a
child safety seat that “hooks” over
a seatback, it may not provide
adequate protection in an accident.
[ After an accident, we recommend
a HYUNDAI dealer check the Child
Restraint System, seat belts,
ISOFIX anchorages and top-tether
anchorages.
Selecting a Child Restraint
System (CRS)
When selecting a CRS for your child,
always:
[ Make sure a CRS has a label certifying
that it meets applicable Safety
Standards of your country.
[ Select a CRS based on your child’s
height and weight. The required label
or the instructions for use typically
provide this information.
[ Select a CRS that fits the vehicle
seating position where it will be used.
[ Read and comply with the warnings
and instructions for installation and
use provided with a CRS.
Child Restraint System types
There are three main types of Child
Restraint Systems: rearward-facing
seats, forward-facing seats, and booster
seats. They are classified according to
the child’s age, height and weight.
Page 69 of 649

3-32
Safety system
CRS09
Rearward-facing Child Restraint
System
A rearward-facing Child Restraint
System provides restraint with the
seating surface against the back of the
child. The harness system holds the
child in place, and in an accident, acts
to keep the child positioned in the Child
Restraint Systems and reduce the stress
to the fragile neck and spinal cord.
All children under the age of one
year must always ride in a rearward-
facing Child Restraint System. There
are different types of rearward-facing
Child Restraint Systems: infant-only
Child Restraint Systems can only be
used rearward-facing. Convertible
and 3-in-1 Child Restraint Systems
typically have higher height and weight
limits for the rearward-facing position
system, allowing you to keep your child
rearward-facing for a longer period of
time.
Keep using Child Restraint Systems in
the rearward-facing position as long as
children fit within the height and weight
limits allowed by the Child Restraint
System’s manufacturer.
OIB034017
Forward-facing Child Restraint
System
A forward-facing Child Restraint System
provides restraint for the child’s body
with a harness. Keep children in a
forward-facing Child Restraint System
with a harness until they reach the top
height or weight limit allowed by your
Child Restraint System’s manufacturer.
Once your child outgrows the forward-
facing Child Restraint System, your child
is ready for a booster seat.
Booster seats
A booster seat is Child Restraint System
designed to improve the fit of the
vehicle’s seat belt system. A booster
seat positions the seat belt so that it fits
properly over your child’s stronger body
parts. Keep your children in booster
seats until they are big enough to fit in a
seat belt properly.
For a seat belt to fit properly, the lap belt
must lie comfortable across the upper
thighs, not the stomach. The shoulder
belt should lie comfortable across the
shoulder and chest and not across the
neck or face. Children under age 13
must always be properly restrained to
minimise the risk of injury in an accident,
sudden stop or sudden manoeuvre.