sunroof HYUNDAI I30 2016 User Guide

HYUNDAI I30 2016 User Guide I30 2016 HYUNDAI HYUNDAI https://www.carmanualsonline.info/img/35/56151/w960_56151-0.png HYUNDAI I30 2016 User Guide

Page 184 of 659

HYUNDAI I30 2016 User Guide 3-34
Convenient features of your vehicle
Tilting the sunroof 
When the sunshade is closed
If you push the sunroof control lever
upward, the sunshade will slide open
then the sunroof glass will tilt.
T

Page 185 of 659

HYUNDAI I30 2016 User Guide 3-35
Convenient features of your vehicle
3
 Periodically remove any dirt thatmay accumulate on the sunroof
guide rail or between the sun-
roof and roof panel, which can
make a noise.
 Do not try to op

Page 186 of 659

HYUNDAI I30 2016 User Guide 3-36
Convenient features of your vehicle
3. Push and hold the sunroof control lever forward (to close the sun-
shade) for about 10 seconds until
the sunroof moves slightly, then
release the control le

Page 217 of 659

HYUNDAI I30 2016 User Guide 3-67
Convenient features of your vehicle
3
Door, Hood, Tailgate open
This warning is displayed indicating
which door, or hood, or tailgate is
open.
Sunroof open (if equipped)
This warning is displayed

Page 564 of 659

HYUNDAI I30 2016 User Guide 7-51
7
Maintenance
By jump starting 
After a jump start from a good bat-
tery, drive the vehicle for 20-30 min-
utes before it is shutoff. The vehicle
may not restart if you shut it off
before the bat

Page 580 of 659

HYUNDAI I30 2016 User Guide 7-67
7
Maintenance
Driver's side fuse Panel
Fuse No.Fuse NameSymbolFuse RatingCircuit Protected
F1MODULE 5MODULE57.5A
Crash Pad Switch, Electro Chromic Mirror, MTS E-Call Module, Audio, 
A/V & Nav

Page 616 of 659

HYUNDAI I30 2016 User Guide 7-103
7
Maintenance
High mounted stop lamp
replacement
If the high mounted stop lamp does not
operate, we recommend that you con-
tact an authorized HYUNDAI dealer.
License plate light bulb
replacemen

Page 617 of 659

HYUNDAI I30 2016 User Guide 7-104
Maintenance1. Using a flat-head screwdriver,gently pry the lens from the interi-
or light housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align th
Page:   < prev 1-10 11-20