mirror HYUNDAI PALISADE 2023 Service Manual

09
9-49
Instrument panel fuse panel
Fuse NameFuse
Rating Protected Component
MODULE 4 7.5A P
assenger Abag Indicator
Seat Belt Indicator
Data Link Connector
Stop Lamp Switch
Driver Door Module
AIR BAG1 15A SRS Control Module
Passenger Occupant Detection Sensor
BRAKE
SWITCH 7.5AIBU
Stop Lamp Switch
MODULE 9 15A Low DC-DC Converter (Audio)
A/V & Navigation Head Unit
Front A/C Control Module
MOOD LAMP
CLUSTER
Rear A/C Control Module
HEAD UP DISPLAY
MODULE 10 10A Front Console Switch
Front Wireless Charger
Blind-Spot Collision Warning Unit LH/RH
FRT-Spot Collision Warning Unit LH/RH
AIR BAG IND 10A Instrument Cluster
MODULE 2 7.5A 3RD Seat Folding Control Module
AC Inverter Outlet
Inverter Unit
MODULE 8 7.5A Center Fascia Keyboard (Hazard Switch)
Key Solenoid
RAIN SENSOR
REAR OCCUPANT ALERT (ROA)
Driver IMS Control Module
Driver Door Module
Driver/Passenger Power Side view Mirror
Driver/Passenger Side view Mirror
Power Tail Gate Unit
S/HEATER FRT 20A1ST Air Ventilation Control Module
1ST Seat Warmer Control Module
AIR BAG 2 10A SRS Control Module
E-SHIFTER 2 10A Electronic ATM Shift Button Switch (SBW)

09
9-51
Fuse NameFuse
Rating Protected Component
MODULE 6 7.5A A/V & Na
vigation Head Unit
Electro Chromic Mirror
Low DC-DC Converter (Audio/AMP)
Front Wireless Charger
Front/Rear A/C Control Module
Center Facia Keyboard
1ST Air Ventilation Seat Control Module
1ST Seat Warmer Control Module
2ND Air Ventilation Seat LH/RH Control Module
2ND Seat LH/RH Warmer Control Module
WASHER 15A Multifunction Switch
RR SEAT RH 25A 2ND Air Ventilation Seat Control Module
2ND Seat RH Warmer Control Module
2ND Seat RH Reclining Folding Actuator
RR WIPER 15A Rear Wiper Relay
Rear Wiper Motor
AMP 25A AMP
Low DC-DC Converter (AMP)
ACC 7.5A A/V & Navigation Head Unit
AMP
Front Wireless Charger
Center Fascia Keyboard
ADAS-PARKING UNIT
IBU
P/SEAT PASS 30A Passenger Seat Manual Switch P/SEAT DRV 30A Driver IMS Control Module
Driver Seat Manual Switch
MODULE 12 7.5A ADAS-PARKING UNIT
HEAD UP DISPLAY
MODULE 13 7.5A MOOD LAMP MODULE 11 10A 2ND CONSOLE SWITCH
MODULE 7 10A Head Lamp RH
Head Lamp LH
DCU DCU UNIT

Maintenance9-54
Fuse Name Fuse
Rating Protected Component
FUSE PT
C HEATER 2 30A PTC Heater Relay
PTC HEATER 3 30A PTC Heater Relay TRAILER 5 30A Trailer Lamp
FUEL PUMP 20A Fuel Pump Relay AWD 20A AWD ECM
HEATED NOZZLE 10A Heated Nozzle Unit B/ALARM HORN 15A Burglar Alarm Horn Relay
ACC 3 15A 2ND USB Charger
TCU 1 15A TCM
TRAILER 2 15A Trailer Lamp
TRAILER 3 15A Trailer Lamp ECU 6 15A ECM
AMS 10A Battery Sensor
A/C 2 10A Front A/C Control Module (Auto)
HEATED
MIRROR 10ADriver/Passenger Power Side view Mirror,
Front A/C Control Module
BLOWER (RR 2) 10A Rear A/C Control Module
E-SHIFTER 2 10A Electronic Transmission
WIPER (FRT) 2 10A IBU, ECM - 10A Not Used
PCB ACC 1
40A PCB Block (ACC1 Relay)
ACC 2 40A PCB Block (ACC2 Relay) ECU 5 30A ECM (Main Relay)
DCU 4 40A Doosing Control Unit (DCU Relay)
IG1 40A PCB Block (IG1 Relay)
WIPER 1 (FRT) 30A PCB Block (Wiper Main Relay) HORN 15A PCB Block (Horn Relay)
A/C 1 10A PCB Block (A/CON Relay)
ACC 4 10A USB Charger_luggage_LH/RH

09
9-63
Exterior CareNOTICE
If you park your vehicle near a stainless
steel sign or glass facade building, the
vehicle’s exterior plastic parts such
as a bumper, spoiler, garnish, lamp or
side view mirror might be damaged
due to sunlight reflected from the
sign or building. To prevent damage of
the exterior plastic parts, you should
avoid parking in areas where light may
be reflected or use a car cover. (The
exterior plastic parts applied to your
vehicle may vary.)
Exterior general caution
It is very important to follow the label
directions when using any chemical
cleaner or polish. Read all warning and
caution statements that appear on the
label.
Finish maintenance
Washing
To help protect your vehicle’s finish from
rus
t and deterioration, wash it thoroughly
and frequently at least once a month
with lukewarm or cold water.
If you use your vehicle for off-road
driving, you should wash it after each
off-road trip. Pay special attention to the
removal of any accumulation of salt, dirt,
mud, and other foreign materials. Make
sure the drain holes in the lower edges
of the doors and rocker panels are kept
clear and clean. Insects, tar, tree sap, bird droppings,
industrial pollution and similar deposits
can damage your vehicle’s finish if not
removed immediately.
Even prompt washing with plain water
may not completely remove all these
deposits. A mild soap, safe for use on
painted surfaces, should be used.
After washing, rinse the vehicle
thoroughly with lukewarm or cold water.
Do not allow soap to dry on the finish.
High-pressure washing

[ When using high-pr
essure washers,
make sure to maintain sufficient
distance from the vehicle.
Insufficient clearance or excessive
pressure can lead to component
damage or water penetration.

[ Do not spray the camera, sensors or
its surrounding area directly with a
high pressure washer. Shock applied
from high pressure water may cause
the device to not operate normally.

[ Do not bring the nozzle tip close to
boots (rubber or plastic covers) or
connectors as they may be damaged
if they come into contact with high
pressure water.
WARNING
After washing the vehicle, test the
brakes while driving slowly to see
if they have been affected by water
before getting on the road. If braking
performance is impaired, dry the
brakes by applying them lightly while
maintaining a slow forward speed.
APPEARANCE CARE