display Hyundai Sonata Hybrid 2016 Multimedia Manual

29
My Music
FeaturesDescription
Mode
Displays current operating mode
File IndexShows the current file/total files
Repeat/
Shuffle/Scan From Repeat/Shuffle/Scan, displays the current operating function
Play Time
Displays the current play time/total play time
Song InfoDisplays the information about the current track

!Ÿ
When a track in the file tab on the list screen is selected :
Displays file, artist, title, album info

!Ÿ
When a track in the other tab on the list screen is selected :
Displays artist, title, album info
List Moves to the list screen
Previous FileIf button is pressed
(less than 0.8 seconds): Moves to the previ-
ous file or pla

y the current file from the beginning (Depends on
the play time)
!Ÿ
If play time is less than 3 seconds, moves to previous file

!Ÿ
If play time is over than 3 seconds, play the current file from the
beginning
If button is pressed (over than 0.8 seconds) it rewinds the track
Play/Pause Plays/pauses the current file
Next File
!Ÿ
If button is pressed (less than 0.8 seconds): Moves to the next file

!Ÿ
If button is pressed (over than 0.8 seconds) it will fast-forward
the file
Repeat Repeats the current file

!Ÿ
If select the song in the file tab on the list screen : Press the Repeat button to switch between repeating one song and
turning repeat off.

!Ÿ
If select the song in the other tabs (Playlist, Artist, Song, Album,
Genre) on the list screen : Press the
Repeat button to switch
between repeating one song and turning repeat off
SoundHound Runs the SoundHound feature.
For more detailed feature, please refer to SoundHound section in
Info part.
)@-'&@(<64"@/>
23(JOEE



<64"@/>
23(JOEE


 


ß
1
 

30
FeaturesDescription
ShufflePlays files in random order

!Ÿ
If select the song in the file tab on the list screen : Press the
Shuffle
button to switch between shuffle and turning shuffle off

!Ÿ
If select the song in the other tabs (Playlist, Artist, Song, Album,
Genre) on the list screen : Press the
Shuffle button to switch
between shuffle and turning shuffle off
Scan Scans the beginning parts of files (approx. 10seconds per file)

!Ÿ
If select the song in the file tab on the list screen : Press the Scan button to switch between scan and turning scan off

!Ÿ
If select the song in the other tabs (Playlist, Artist, Song, Album,
Genre) on the list screen : Press the
Scan button to switch
between scan and turning scan off
Menu
!Ÿ
Add to Playlist: Adds the current song to the Playlist
Playlist is placed on the left tab in the list

!Ÿ
Delete Current File: Deletes the current track from My Music.
SEEK/
TRACK If button is pressed (less than 0.8 seconds) moves to previous/next
file or pla

y the current song from the beginning

!Ÿ
If play time is less than 3 seconds, moves to previous/next file

!Ÿ
If play time is over than 3 seconds, plays the current file from the
beginning
If button is pressed (over than 0.8 seconds) it will rewind/fast-forward
the tr

ack
TUNE Turn the


TUNE knob to search a desired track. If the desired track
is displayed, press the
TUNE knob to play the track. If the

TUNE knob is not pressed within 5 seconds of searching
tracks, the track info for the current track is restored.
My Music
)@-'&@(<64"@/>
23(JOEE


 <64"@/>
23(JOEE


 


ß
1
 

33
Using the Menu
During a Phone Call
When making a call, you can use
the following menu items.
Name Description
Use PrivateSwitches a voice
call from the car
Hands-free to the
mobile phone.
End
Ends a call.
Contacts Displays the
Contacts list.
Outgoing
Volume Displays the Mic
Volume settings.
You can adjust the
in-call volume that
the other party
hears (level 1 - 5).
Keypad
Moves to a screen
for entering ARS
numbers.
SwitchSwitches to a call
on hold, if any. You
can also switch
calls by selecting
the number in
the Information
Display. The Switch
function switches
the current call to
a waiting call in
order to answer a
new incoming call.
)@-'&@(<64"@/>
23(JOEE



<64"@/>
23(JOEE


 


ß
1
 

34
Call History
Select PHONE key in the head unit
▶ and then
Call History .
Bluetooth
Name Description
All Lists the all call
history.
DialedLists the calls that
you made.
Received Lists the calls that
you have received.
Missed
Lists the calls you
missed.
Call HistoryDisplays all of your
call history. Select
from the list to dial
the number.
Information
Displays the details
of your call history
information.
DownloadDownloads the call
history information
from your mobile
phone.
Call
Dials the selected
number in your Call
History Information.
Contacts
Info Goes to the Contact
Information screen
if the number has
been stored.
)@-'&@(<64"@/>
23(JOEE



<64"@/>
23(JOEE


 


ß
1
 

35
Favorites
Select PHONE key in the head unit
▶ and then
Favorites .
Contacts
Select PHONE key in the head unit
▶ and then
Contacts
Name Description
Contacts
List The list of Contacts.
Select from the list
to dial the number.
Information
Displays contact
information.
Download Downloads contacts
from your mobile
phone.
Search by
Name Searches Contacts
for the name that you
enter.
Search by
Number Searches Contacts
for the number that
you enter.
Add to
Favorites Adds a phone num-
ber to Favorites.
Name Description
FavoritesLists the phone
numbers saved as
Favorites. Select
from the list to dial
the number.
Add New
Adds a new number
to Favorites.
Delete
Items Deletes numbers
that you select from
Favorites.
Delete All
Deletes all of the
numbers from
Favorites.
)@-'&@(<64"@/>
23(JOEE



<64"@/>
23(JOEE


 


ß
1
 

36
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only
the commands that are displayed
on the screen and written in the
User’s Guide.
2. To ensure the correct recognition
and execution of your command,
say your command when you hear
the beep after a voice prompt.
3. Voice recognition automatically
ends if:
1) A call is incoming or outgoing
2) A media (USB or iPod, etc.) is
connected or disconnected
3) The front or rear view camera
is operated (optional)
4) The car engine starts or stops
5) A system key, such as
RADIO key or MEDIA key is
selected
6) An emergency occurs, for
example re-searching for the
route after the navigation
route has been lost 4.
The microphone that recognizes
your voice is located over the
head part in the driver’s seat.
To make your commands bet-
ter understood, keep your body
straight in the driver’s seat when
speaking the command.
5. Speaking naturally and clearly will
ensure better recognition of your
voice commands.
6. In the following cases voice rec-
ognition will be affected by ambi-
ent noise.
1) The sound of the wind if any
window or the sun roof is
open.
2) High speed blower from the
air v

ents. Set climate control
to blow lower than level 3.
3)


Vibrations from passing
through a tunnel.
4) Vibrations from driving on an
uneven road.
5) Storms and heavy rain.
Voice Recognition
)@-'&@(<64"@/>
23(JOEE


 <64"@/>
23(JOEE


 


ß
1
 

38
Skipping Prompt
Messages
When you hear the prompt mes-
sage, the voice recognition icon on
the steering wheel remote control
to skip the message and go directly
to listening mode to say your com-
mand.
This results in f

aster operation when
you feel the message is too long or
you already know the command to
use.
Quick Run of
Voice Recognition
(Manual Mode)
Usually, you are supposed to say
a command to execute the desired
operation after the voice guidance.
However, it takes a little time to wait
for the voice guidance. If you would
like to activate the desired operation
more quickly, you can just touch the
commands displayed on the screen.
This feature is useful when you feel
the voice guidance is too long or
voice commands do not work as you
desired.
Voice Recognition
)@-'&@(<64"@/>
23(JOEE


 <64"@/>
23(JOEE


 


ß
1
 

39
Voice Recognition Screen Overview
Start Screen
NameDescription
Most frequently
used commands Displays the six most frequently used commands.
Not available
command Displays commands that are not available due to a failure in
meeting the conditions for using them and thus need addi-
tional settings. The conditions required for using them will
be described briefly under each command.

Voice
recognition
status icons Standby Voice guidance Voice command process
User's speaking
volume being
recognized Displays the voice command volume in real time.
Recognized
results Displays the voice recognition result.
Help
Displays all available help commands in a tree format.
Exit
Ends the voice recognition.
)@-'&@(<64"@/>
23(JOEE


<64"@/>
23(JOEE


 


ß
1
 

40
Voice Commands
Types of Commands
Voice recognition commands are classified as “Global Commands” and “Local
Commands.”
1. Global Commands ("J
): Commands that can be used immediately after acti-
vating voice recognition.
2. Local Commands (
!¹): Commands that can be used when a multimedia,
navigation, or Bluetooth call is running, or displayed on the screen, after
activating voice recognition.
Call Commands
* Check the following before using call commands :
1. Voice commands related to phone calls can be used after connecting a
Bluetooth device.
2.

To call a person, for example “Call ” whose name is listed in Contacts, you must first download the Contacts list. For details on down-
loading contacts, see “Part 3. Using Bluetooth > Chapter 3. Bluetooth Phone
> 3.10 Contacts”.
3. After downloading the Bluetooth contacts, it will take some time to convert the Contacts into voice data during which time you cannot make a call by
name yet. The time it takes to convert voice data may vary depending on
the n

umber of Contacts downloaded on the phone.
Voice Recognition
)@-'&@(<64"@/>
23(JOEE


 <64"@/>
23(JOEE


 


ß
1
 

41
CommandOperation
"J Call Displays downloaded Contacts, after this you can make
a call by saying the name.
"J Call You can directly call a person by in the down-
loaded Contacts.
"J Call on
Mobile You can call a
person directly to the number
that is sa

ved as “Mobile” in the downloaded Contacts.
e.g.) Call “John Smith” on Mobile
"J Call in
Office You can call a
person directly to the number
that is sa

ved as “Office” in the downloaded Contacts.
e.g.) Call “John Smith” in Office
"J Call at
Home You can call a
person directly to the number
that is sa

ved as “Home” in the downloaded Contacts.
e.g.) Call “John Smith” at Home
"J Call on
Other You can call a
person directly to the number
that is sa

ved as “Other” than “Mobile, Home, or Office”
in the downloaded Contacts.
e.g.) Call “John Smith” on Other
"J Dial Number Displays a screen where you can say a phone number
to dial.
"J Dial You can directly say the number to call.
e.g.) Dial 111 555 1234
"J Redial Directly calls at the number that you last dialed.
"J Call History Displays your Call History, where you can say the list
number to make a call.
)@-'&@(<64"@/>
23(JOEE



<64"@/>
23(JOEE


 


ß
1