key Hyundai Sonata Hybrid 2016 Multimedia Manual
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2016, Model line: Sonata Hybrid, Model: Hyundai Sonata Hybrid 2016Pages: 308, PDF Size: 15.72 MB
Page 31 of 308
SiriusXM™ I 2-7
02
FeaturesDescription
Play Live
It will change to listening live broadcast mode.
Skip BackwardRepeats the previously broadcasted program.
!Ÿ
Holding for less than 0.8 seconds : Moves to
the previous segment
!Ÿ
Holding for longer than 0.8 seconds: Moves
to the previous 5 seconds
Play Pause Pauses/plays the current broadcasting program.
Skip ForwardMoves to the next segment.
ListDisplays SiriusXM™ Radio Categories/Channel
Lists
MenuWhat’s on My Preset?
The program schedule saved in my preset. (For
more details, see Section 2.5. Viewing Menu.)
!Ÿ
Featured Favorite
Theme channels recommended by SiriusXM™ .
(For more details, see Section 2.5. Viewing
Menu.)
!Ÿ
Preset Scan
Plays preset frequencies for 5 seconds each.
SoundHound Runs the SoundHound feature.
For more detailed feature, please refer to
SoundHound section in Info part.
SEEK/TRACKWhen key is pressed quickly.(under 0.8 seconds)
Plays the previous/next channel
When key is pressed and held.(over 0.8 seconds)
Continuously changes the channel until the key
is released and plays the current channel
TUNE
Changes the channel
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 32 of 308
2-8 I AV
Selecting through
Channel/Category List
Press the List Ü
Select the desired cat-
egory and channel.
Select the desired category and the chan-
nel. Once selected, the previous screen
will be restored and the selected channel
will begin playing.
If you select the Skip button, you can
scan channels using the
SEEK
TRACK key or
the
TUNE
knob by skipping the channels
that you chose to skip.
Direct Tune
Enter the number of the channel you want
to receive.
Viewing Menu
Using the Menu button on the right, you
can view the program schedule and infor-
mation about the Featured Favorites pro-
vided by SiriusXM™ .
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 34 of 308
2-10 I AV
Featured Favorites
Featured Favorites feature allows
SiriusXM™ to broadcast additional presets
!Ÿ
Example 1 : "Martha's Favorites" may
represent Martha Stuart's favorites pre-
sets on her radio
!Ÿ
Example 2 : During holidays, "Holiday
Music" may represent all the SiriusXM™
channels that are playing the holiday
music for easy access by users
Multiple sets Featured Favorites data
can be broadcast by SiriusXM™ and can
change from time to time
Media
Starting Mode
From All Menus, select an icon you want
from “Music, Image, AUX” to enter the last
mode you used.
You can enter the Media mode that you
recently used by pressing the
MEDIA
hard key while in another mode. (excluding
USB Image)
To go to a different mode after you enter
Media mode, press
MEDIA and choose
the one you want.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 54 of 308
2-30 I AV
iPod
Using iPod Devices
!Ÿ
iPod is a registered trademark of Apple Inc.
!Ÿ
iPod mode will not operate if the con-
nected iPod cannot be recognized due
to operation of unsupported versions
that do not support related protocols,
iPod abnormalities, or iPod device
defects. Some iPods with unsupported
communication protocols may not prop-
erly operate with the Multimedia system.
!Ÿ
For fifth generation iPod Nano devices,
the iPod may not be recognized when
the battery level is low. Please charge
the iPod for use.
!Ÿ
Search/play orders shown within the
iPod device may differ with the orders
shown within the Multimedia system.
!Ÿ
If the iPod malfunctions due to an iPod
device defect, reset the iPod and try
again. (To learn more, refer to your iPod
manual)
!Ÿ
If repeatedly connect and disconnect
iPod/iPhone to the Multimedia system
with USB cable in short time, it may
cause abnormal operation.
!Ÿ
The time for recognition of iPod/iPhone
may vary depending on device type,
firmware version and iOS version.
!Ÿ
For some iPod Touch and iPhone
devices, connecting Bluetooth
® while the
iPod is operating may result in discon-
tinued iPod sound. When such devices
with Bluetooth
® support are connected,
this problem occurs as the sound source
is changed from the Dock Connector
(USB connector cable) to Bluetooth.
!Ÿ
To prevent this symptom, Bluetooth
Audio function in the Multimedia system
is limited if iPod/iPhone is connected
to the system through both cable and
Bluetooth. To listen to the iPod sound,
use either iPod menu with USB connec-
tion or Bluetooth Audio with Bluetooth
connection.
!Ÿ
To listen to the iPod sound, reconnect
the USB cable or change the audio out-
put settings in iPod/iPhone to Dock.
!Ÿ
In order to use the iPod while operating
the keys, you must use a dedicated iPod
cable. (the cable that is supplied when
purchasing iPod/ iPhone products)
œ During ACC ON state, connecting the
iPod through the iPod cable (The cable
that is supplied when purchasing iPod/
iPhone product.) will charge the iPod
through the head unit.
œ
The use of genuine iPod cables sup- The use of genuine iPod cables sup-
plied by Apple is recommended. (The plied by Apple is recommended. (The
use of other products may result in use of other products may result in
noise or abnormal operation.)noise or abnormal operation.)
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 61 of 308
AUX I 2-37
02
AUX
Connecting an External Device
If an external device connector is connected with the AUX termi-
nal, then AUX mode will automatically operate. Once the connec-
tor is disconnected, the previous mode will be restored.
!Ÿ
AUX mode can be used only when an external audio player has
been connected.
!Ÿ
The AUX volume can also be controlled separately through the
connected device.
Features Description
SoundHoundRuns the SoundHound feature.
For more detailed feature, please refer to
SoundHound section in Info part.
Back Button
Move to home/previous mode screen
i Information
SEEK
TRACK key, TUNE
is not supported.
NOTICE
If only a cable is connected to the AUX without an external device, the
mode will be changed to A
UX, but noise may occur. When an external
device is not being used, remove the connector jack.
When the external device power is connected to the power jack, playing
the e
xternal device may output noise. In such cases, disconnect the
power connection before use.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 63 of 308
Bluetooth Õ Audio I 2-39
02
Bluetooth Connections
Settings
Settings for pairing, connection and dis-
connection of a Bluetooth device
!Ÿ
In Bluetooth Audio play screen, Select
Connections
!Ÿ
Select SETUP key in the head unit. ▶
Select
Phone. ▶
Select Bluetooth connection
i Information
If the music in the mobile phone is not played
after changing to audio streaming mode
,
press the play button. Thus check if the
music is playing in the Bluetooth device after
changing to audio streaming mode. Audio
streaming may not be supported for some
mobile phones.
Please check the Bluetooth compatibility in
belo
w website : HYUNDAI Motor America
https://www.hyundaiusa.com/bluetooth
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 70 of 308
3-4 I Bluetooth
Bluetooth Connection
Pairing a New Device
Before you can use the Bluetooth feature,
you must first pair/connect your mobile
phone to your car.
Up to 5 Bluetooth devices can be paired.
Only one Bluetooth device can be con-
nected at a time.
Pairing a New Device by Selecting
Phone/Call
Select PHONE key in the head unit or
key in the steering wheel remote
control. ▶
Select
Yes . ▶
Pair your car
after your mobile phone detects the
Bluetooth device. ▶
Enter the passkey or
accept the authorization popup. ▶
Connect Bluetooth.
Pairing a New Device Through the
Phone Settings
Select SETUP key in the head unit. ▶
Select
Phone. ▶
Select Bluetooth Connection.
▶ Select
Add New. ▶
Pair your car after
your mobile phone detects the Bluetooth
device. ▶
Enter the passkey or accept the
authorization popup. ▶
Connect Bluetooth.
The default passkey is 0000.
The device name above is an example.
Check the actual information on the product.
Connecting Bluetooth Devices
Connects the Bluetooth devices that you
add.
Connecting Devices by Selecting
Phone/Call
Select PHONE key in the head unit or
key in the steering wheel remote
control. ▶
Select the name of the device
to connect. ▶
Connect Bluetooth.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 71 of 308
Bluetooth Connection I 3-5
03
Connecting Devices Through the
Phone Settings
Select SETUP key in the head unit. ▶
Select
Phone. ▶
Select Bluetooth Connection.
▶ Select the name of the device to connect.
▶ Connect Bluetooth.
Disconnecting
Bluetooth Devices
Disconnects Bluetooth devices that are
connected.
Select
SETUP key in the head unit. ▶
Select
Phone. ▶
Select Bluetooth Connection.
▶ Select the name of the device to discon-
nect.
Deleting Bluetooth Devices
Deletes the Bluetooth devices that you
added. Note that deleting a Bluetooth
device will delete all Call History and
Contact Info downloaded along with it.
Select
SETUP key in the head unit. ▶
Select
Phone. ▶
Select Bluetooth Connection. ▶
Select
Delete Devices. ▶
Select the device
name to delete. ▶
Select
Delete.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 73 of 308
Bluetooth Phone I 3-7
03
Dial
Dials a call after the Bluetooth devices are
connected.
!Ÿ
Select
PHONE key in the head unit or
key in the steering wheel
remote control.
!Ÿ
You can also select
All Menus from the
full screen display ▶
Phone.
Name Description
KeypadUse the keypad to
enter the phone num-
ber that you want to
call. Press and hold
the last number of
a speed dial to dial
a number that you
added to the Speed
Dial list in the phone
Delete
Delete the numbers
that you entered.
SettingsMoves to a screen of
Phone Settings.
CallMakes a call after
you dial a number
and select CALL. If
the number is listed
in Dialed Calls, you
can select the number
and press CALL to
automatically dial that
number again.
Information
Some types of mobile phones may not
suppor
t the Speed Dial function.
Accept/Reject Call
If there is an incoming call after you made
a Bluetooth connection, a popup message
will appear.
Information
In some mobile phones, the caller's number
ma
y not be displayed, and the Ignore feature
may not be supported.
Name Description
Accept
Answers the call.
Reject Ignores the call.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E
Page 74 of 308
3-8 I Bluetooth
Using the Menu During
a Phone Call
When making a call, you can use the fol-
lowing menu items.
NameDescription
Use PrivateSwitches a voice call
from the car Hands-free
to the mobile phone.
End
Ends a call.
Contacts Displays the Contacts
list.
Outgoing
Volume Displays the Mic Volume
settings. You can adjust
the in-call volume that
the other party hears
(level 1 - 5).
Keypad
Moves to a screen for
entering ARS numbers.
SwitchSwitches to a call on
hold, if any. You can also
switch calls by select-
ing the number in the
Information Display. The
Switch function switches
the current call to a
waiting call in order to
answer a new incoming
call.
i Information
If the caller's number is listed in Contacts, the
caller's name will be displa
yed. Otherwise,
only the number will be displayed. In some
mobile phones, the phone number may not
be displayed.
In some Bluetooth devices, the Use Private
f
eature may not be supported.
In some Bluetooth devices, the Switch feature
ma
y not be supported.
During a phone call on a Bluetooth Hands-
free
, you cannot access other modes, such as
Audio Video and Settings. You can switch to
in-call volume control and navigation modes
only.
Depending on handset types, the in-call
v
olume the other party hears may differ. If the
other party hears your voice too low or too
loud, adjust the mic volume.
) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' & @ ( < 6 4 " @ / > 1 B S U J O E E