engine oil Hyundai Tucson 2020 - RHD (UK, Australia) Service Manual

8-7
8
Specifications & Consumer information
R RE
EC
CO
OM
MM
ME
EN
ND
DE
ED
D
L
LU
UB
BR
RI
IC
CA
AN
NT
TS
S
A
AN
ND
D
C
CA
AP
PA
AC
CI
IT
TI
IE
ES
S
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume Classification
Engine oil *
1*2
(drain and refill)
RecommendsGamma
1.6 T-GDI4.5l
ACEA C2/C3
Nu 2.0 GDI4.0l
SAE 5W-20 / API Latest (ILSAC Latest)
R 2.0 TCI7.6lwith DPF ACEA C3 or C2
without DPF ACEA A3/B4
Manual transmission fluidNu 2.0 GDI1.5~1.6lHK SYN MTF 70W (SK)
SPIRAX S6 GHME 70W (H.K.SHELL)
GS MTF HD 70W (GS CALTEX)
(API GL-4, SAE 70W) R 2.0 TCI1.8~1.9l
Dual clutch transmission fluid1.9~2.0lHK DCTF 70W (SK)
SPIRAX S6 GHME 70W DCTF (H.K.SHELL)
GS DCTF HD 70W (GS CALTEX)
(API GL-4, SAE 70W)
Automatic transmission
fluidNu 2.0 GDI7.3 lMICHANG ATF SP-IV,
SK ATF SP-IV,
NOCA ATF SP-IV,
HYUNDAI genuine ATF SP-IV
R 2.0 TCI7.0 l

8-8
Specifications & Consumer information
M/T : Manual transmission
A/T : Automatic transmission
*1: Refer to the recommended SAE viscosity numbers on the next page.
*
2: Engine oils labelled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel econ-
omy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure
in everyday driving, but in a year’s time, they can offer significant cost and energy savings.Lubricant Volume Classification
Engine Coolant
Gamma
1.6 T-GDI7.1l
Mixture of antifreeze and water
(Phosphate-based Ethylene glycol coolant
for aluminium radiator)Nu 2.0
GDIM/T7.0 l
A/T6.9 l
R 2.0 TCI8.6~8.8l
Brake/Clutch fluid0.7~0.8lFMVSS116 DOT-3 or DOT-4
Rear differential oil (4WD)0.53~0.63 l
HYPOID GEAR OIL API GL-5, SAE75W/85
(SK HCT-5 GEAR OIL 75W/85 or EQUIVALENT)
Transfer case oil (4WD)
Gamma
1.6 T-GDI
0.48~0.52 lNu 2.0 GDI
M/T
Nu 2.0 GDI
A/T
0.42~0.47l
Diesel
Fuel62lRefer to “Fuel requirements” in foreword section

8-9
8
Specifications & Consumer information
Recommended SAE viscosity
number
Engine oil viscosity (thickness) has
an effect on fuel economy and cold
weather operating (engine start and
engine oil flowability). Lower viscosi-
ty engine oils can provide better fuel
economy and cold weather perform-
ance, however, higher viscosity
engine oils are required for satisfac-
tory lubrication in hot weather. Using
oils of any viscosity other than those
recommended could result in engine
damage.a
Always be sure to clean the area
around any filler plug, drain
plug, or dipstick before check-
ing or draining any lubricant.
This is especially important in
dusty or sandy areas and when
the vehicle is used on unpaved
roads. Cleaning the plug and
dipstick areas will prevent dirt
and grit from entering the
engine and other mechanisms
that could be damaged.
CAUTION
When choosing an oil, consider the range of temperature your vehicle will be
operated in before the next oil change.
Proceed to select the recommended oil viscosity from the chart.
*1: For better fuel economy, it is recommended to use the engine oil of a viscosity grade
SAE 5W-30. However, if the engine oil is not available in your country, select the prop-
er engine oil using the engine oil viscosity chart.
*
2: For better fuel economy, it is recommended to use the engine oil of a viscosity grade
SAE 5W-20.
Temperature Range for SAE Viscosity Numbers
Temperature°C
(°F)-30 -20 -10 0 10 20 30 40 50
-10 0 20 40 60 80 100 120
2.0 GDI
20W-50
10W-30
15W-40
5W-20*2, 5W-30
20W-50
15W-40
10W-30
5W-30*1, 5W-40
1.6 T-GDI
■Petrol Engine Oil
■Diesel Engine Oil
Temperature Range for SAE Viscosity Numbers
Temperature°C
(°F)-30 -20 -10 0 10 20 30 40
-10 0 20 40 60 80 100
5W-30/40
10W-30/40
0W-30/40
2.0 TCI

8-12
Specifications & Consumer information
A compressor label informs you the
type of compressor your vehicle is
equipped with such as model, suppli-
er part number, production number,
refrigerant and refrigerant oil.The refrigerant label provides infor-
mation such as refrigerant type and
amount.
The label is located on the underside
of the bonnet.
Petrol engine
The fuel label is attached on the fuel
filler door.
A. Octane rating of unleaded petrol
1) RON/ROZ : Research Octane
Number
2) (R+M)/2, AKI : Anti Knock Index
B. Identifiers for Petrol-type fuels
❈This symbol means usable fuel.
Do not use any other fuel.
C. For further details, refer to the
"Fuel Requirement" in the intro-
duction chapter.
OTLE088009OTLE088010
R RE
EF
FR
RI
IG
GE
ER
RA
AN
NT
T
L
LA
AB
BE
EL
L

( (I
IF
F
E
EQ
QU
UI
IP
PP
PE
ED
D)
) A AI
IR
R
C
CO
ON
ND
DI
IT
TI
IO
ON
NE
ER
R

C CO
OM
MP
PR
RE
ES
SS
SO
OR
R
L
LA
AB
BE
EL
LF FU
UE
EL
L
L
LA
AB
BE
EL
L

( (I
IF
F
E
EQ
QU
UI
IP
PP
PE
ED
D)
)
OTM048455L