cruise control HYUNDAI VELOSTER 2022 Owners Manual

3-46
Convenient features of your vehicle
High Beam Assist
(HBA) indicator light
(if equipped)
This indicator light illuminates :
• When the high-beam is on with the
light switch in the AUTO light posi-
tion.
• If your vehicle detects oncoming or
preceding vehicles, High Beam
Assist will switch the high beam to
low beam automatically.
For more details, refer to "High
Beam Assist (HBA)" in this chap-
ter.
Icy Road Warning Light
(if equipped)
This warning light is to warn the driver
the road may be icy.
When the outside temperature
gauge reads below 40°F (4°C), the
Icy Road Warning Light and Outside
Temperature Gauge blinks and then
illuminates. Also, the warning chime
sounds 1 time.
Information
If the icy road warning light illumi-
nates while driving, it means that the
outside temperature has reduced and
that the road conditions may be icy.
As a precaution you should reduce
your speed and drive more carefully
and with greater attention to the road
conditions.
Cruise Indicator Light
(if equipped)
This indicator light illuminates:
• When Cruise Control is enabled.
For more details, refer to "Cruise
Control (CC)" in chapter 5.
SPORT Mode Indicator
Light
This indicator light illuminates:
• When you select "SPORT" mode
as drive mode.
For more details, refer to "Drive
Mode Integrated Control System"
in chapter 5.
i

5
Blind-Spot Collision Warning (BCW) ...............5-84
System settings ...............................................................5-85
System operation ............................................................5-87
System malfunction and limitations ...........................5-89
Driver Attention Warning (DAW) .......................5-94
System settings ..............................................................5-95
System operation ............................................................5-96
System malfunction and limitations ...........................5-98
CRUISE CONTROL (CC) ......................................5-102
System operation ..........................................................5-102
Increase setting speed.................................................5-103
Temporary speed increase ........................................5-103
Lane Following Assist (LFA) ...........................5-107
System settings .............................................................5-107
System operation ..........................................................5-108
System malfunction and limitations .........................5-111
Rear Cross-Traffic Collision
Warning (RCCW) ................................................5-112
System settings .............................................................5-113
System operation ..........................................................5-114
System malfunction and limitations .........................5-116
Special driving conditions .................................5-120
Hazardous Driving Conditions....................................5-120
Rocking the Vehicle ......................................................5-120
Smooth Cornering .........................................................5-121
Driving at Night .............................................................5-121
Driving in the Rain ........................................................5-121
Driving in Flooded Areas.............................................5-122
Highway Driving ............................................................5-122
Winter driving .....................................................5-123
Snow or Icy Conditions................................................5-123
Winter Precautions .......................................................5-126
Vehicle load limit ................................................5-128
Tire Loading Information Label .................................5-129
Trailer Towing .....................................................5-133

5-37
Driving your vehicle
5
ESC operation
ESC ON condition
When the ignition switch is
in the ON position, the ESC
and the ESC OFF indicator
lights illuminate for approxi-
mately three seconds and goes off,
then the ESC is turned on. (After a
new ignition cycle, the ESC ON
mode is always activated (default
setting).)
You may select between the follow-
ing state of ESC:
• ESC NORMAL activated (ESC
ON)
• ESC SPORT activated (ESC
SPORT indicator illuminates)
• ESC deactivated (ESC OFF indi-
cator illuminates)
When operating
When the ESC is in operation, the
ESC indicator light blinks:
• When you apply your brakes under
conditions which may lock the
wheels, you may hear sounds from
the brakes, or feel a corresponding
sensation in the brake pedal. This
is normal and it means your ESC is
active.
• When the ESC operates, the
engine may not respond to the
accelerator as it does under rou-
tine conditions.
• If the Cruise Control was in use
when the ESC activates, the
Cruise Control automatically disen-
gages. The Cruise Control can be
reengaged when the road condi-
tions allow.See "Cruise Control
System" later in this chapter.(if
equipped)• When moving out of the mud or
driving on a slippery road, the
engine rpm (revolutions per
minute) may not increase even if
you press the accelerator pedal
deeply. This is to maintain the sta-
bility and traction of the vehicle and
does not indicate a problem.

5-58
Driving your vehicle
7. While depressing the clutch pedal
with your left foot, quickly and fully
depress the accelerator pedal with
your right foot. Launch control will
be in the ready state. The mes-
sage 'Launch Control Ready' will
appear on the cluster. If neces-
sary, adjust engine rpm with the
cruise control switch (+/-).
8. A smooth, quick release of the
clutch pedal within 8 seconds,
while maintaining full depression
of the accelerator pedal will initiate
launching of the vehicle. The mes-
sage 'Launch Control Active' will
appear on the cluster.
9. Control will deactivate when the
accelerator pedal is released.
Launch control on and off
(For Dual Clutch Transmission)
1. Select N mode with 'N' button (N
mode indicator will illuminate on
the cluster) or select SPORT+ for
the engine mode in CUSTOM
mode.
2. Check that the ESC mode is ESC
SPORT or ESC OFF. If not, press
ESC OFF button to set the ESC
mode to ESC SPORT or ESC OFF
(Indicator illuminates on the clus-
ter). (Electronic Stability Control
(ESC) does not operate when
ESC OFF.)
3. Shift the gear to D (Drive) or M
(Manual shift mode). (When
Manual shift mode is selected,
driver must shift manually.)
4. Select 'Performance Options →
Launch Control' to set engine
RPM from the Infotainment sys-
tem screen. After setting RPM,
press 'Activate’.
5. Align the steering wheel straight
6. Depress the brake pedal to the
maximum with your left foot.7. While depressing the brake pedal
with your left foot, quickly and fully
depress the accelerator pedal with
your right foot. Launch control will
be in the ready state. The mes-
sage 'Launch Control Ready' will
appear on the cluster. If neces-
sary, adjust engine rpm with the
cruise control switch (+/-).
8. A smooth, quick release of the
brake pedal within 8 seconds,
while maintaining full depression
of the accelerator pedal will initiate
launching of the vehicle. The mes-
sage 'Launch Control Active' will
appear on the cluster.
9. Launch Control will deactivate
when the accelerator pedal is
released.

5-62
Driving your vehicle
Operating condition
• N Track Sense Shift is enabled in the
Performance Options settings
• Shift lever in D (Drive) position
• Transmission mode is SPORT or
SPORT+ (Including SPORT or N
Riding Mode)
• Vehicle speed is above 21 mph
(35km/h)
• Cornering-oriented dynamic driving
detection
❈When N Track Sense Shift is oper-
ating, a message is displayed in
the instrument cluster LCD screen
as shown below.
Non-operating conditions
• N Track Sense Shift is disabled in
Performance Options settings
• Shift lever position is in P/R/N
• Changing Transmission mode dur-
ing operation (Transmission mode
does not work in ECO, NORMAL
or manual shift mode.)
• Cruise Control is operating
• Engine warning light is on
• Vehicle speed is below 21 mph (35
km/h)
❈When N Track Sense Shift is deac-
tivated, the displayed message will
disappear from the instrument
LCD screen.
N Power Shift (For Dual Clutch
Transmission)
When the driver depresses the
accelerator pedal fully (100%) in N
mode for faster acceleration, it con-
trols by (up-) shifting with minimal
energy loss.
N Power Shift can be deactivated by
pressing 'Activate' on the screen.
When N Power Shift is deactivated,
vehicle shifting is similar to normal
shifting. However, it is activated when
the engine is restarted. Vehicle safety and control must
be at your own discretion and
do not attempt to drive danger-
ously to operate N Track Sense
Shift.
CAUTION
OJSN050214
OJSN050190

5-102
Driving your vehicle
(1) Cruise indicator
(2) Set speed
Cruise Control will allow you to drive
at speeds above 20 mph (30 km/h)
without depressing the accelerator
pedal.
System operation
To set speed
1. Press the Driving Assist but-
ton.
The set speed and Cruise
( ) indicator will illumi-
nate on the cluster.
2. Release the accelerator pedal.
Vehicle speed will maintain the set
speed even when the accelerator
pedal is not depressed.
Information
On a steep slope, the vehicle may
slightly slow down or speed up while
driving uphill or downhill.
i
&58,6(
CRUISE CONTROL (CC)
OIK057157N
OJSN050194

5-103
Driving your vehicle
5
To increase speed
• Push the + switch up and release it
immediately. The cruising speed
will increase by 1 mph/h (1 km)
each time the switch is operated in
this manner.
• Push the + switch up and hold it
while monitoring the set speed on
the cluster. The cruising speed will
increase by 5 mph (10 km/h) each
time the switch is operated in this
manner.
Release the switch when the
desired speed is shown and the
vehicle will accelerate to that
speed.
To decrease speed
• Push the - switch down and
release it immediately. The cruising
speed will decrease by 1 mph/h (1
km) each time the switch is operat-
ed in this manner.
• Push the - switch down and hold it
while monitoring the set speed on
the cluster. The cruising speed will
decrease by 5 mph (10 km/h)
each time the switch is operated in
this manner.
Release the switch at the speed
you want to maintain.
Temporary speed increase
To temporarily accelerate
If you want to speed up temporarily
when Cruise Control is on, depress
the accelerator pedal.
To return to the set speed, take your
foot off the accelerator pedal.
If you push the + switch up or - switch
down at increased speed, the cruis-
ing speed will be set to the current
increased speed.
OBU050206NOBU050207N

5-104
Driving your vehicle
To temporarily pause the sys-
tem
Cruise Control will be paused when:
Manually
- Depressing the brake pedal
- Pushing the button Automatically
- Shifting the gear to N (Neutral)
- The parking brake is applied
- Decreasing vehicle speed to less
than approximately 15 mph (25
km/h)
- ESC (Electronic Stability Control) is
operating
- N Grin Shift (NGS) is operating
The set speed will turn off but the
Cruise( ) indicator will
stay on.If Cruise Control pauses during a
situation that is not mentioned,
have the vehicle inspected by an
authorized HYUNDAI dealer.
NOTICE
&58,6(
OBU050208N

5-105
Driving your vehicle
5
To resume the system
Push the +, - or ( ) switch.
If you push the + switch up or - switch
down, vehicle speed will be set to the
current speed on the cluster.
If you push the ( ) switch, vehicle
speed will resume to the preset
speed.
Vehicle speed must be above 20
mph (30 km/h) for the system to
resume.
To turn off the system
Press the Driving Assist to turn
Cruise Control off. The Cruise
( ) indicator will go off.
Always press the Driving Assist but-
ton to turn Cruise Control off when
not in use.
&58,6(
OJSN050209
■Type A
■Type B
OJSN050194
Check the driving condition
before using the switch.
Driving speed may sharply
increase or decrease when you
press the switch.
WARNING

5-106
Driving your vehicle
Take the following precautions
when using Cruise Control:
•Always set the vehicle speed
to the speed limit where you
are driving.
•Keep Cruise Control off when
the system is not in use, to
avoid inadvertently setting a
speed. Check that the Cruise
( ) indicator is off.
•Cruise Control does not sub-
stitute for proper and safe
driving. It is the responsibility
of the driver to always drive
safely and should always be
aware of unexpected and sud-
den situations from occur-
ring.
•Always drive cautiously to
prevent unexpected and sud-
den situations from occur-
ring. Pay attention to the road
conditions at all times.
&58,6(