instrument panel INFINITI EX 2011 Owner's Guide

When the interior temperature is reduced, the
system will resume operating automatically and
the LDP ON indicator will stop blinking.
LANE CAMERA UNIT MAINTENANCE
The lane camera unit1for the LDW/LDP
system is located inside the map light cover. To
keep the proper operation of the LDW/LDP
systems and prevent a system malfunction, be
sure to observe the following:
● Always keep the windshield clean.
● Do not attach a sticker (including transpar-
ent material) or install an accessory near the
camera unit.
● Do not place reflective materials, such as
white paper or a mirror, on the instrument
panel. The reflection of sunlight may ad-
versely affect the camera unit’s capability of
detecting the lane markers. ●
Do not strike or damage the areas around
the camera unit. Do not touch the camera
lens or remove the screw located on the
camera unit. If the camera unit is damaged
due to an accident, contact an INFINITI re-
tailer.
SSD0453
5-24Starting and driving

The brightness of the BSW indicator lights is
adjusted automatically depending on the
brightness of the ambient light.
A chime sounds if the radar sensors have
already detected vehicles when the driver acti-
vates the turn signal. If a vehicle comes into the
detection zone after the driver activates the turn
signal, then only the BSW indicator light flashes
and no chime sounds. (See “BSW DRIVING
SITUATIONS” later in this section)
The BSW system is automatically turned on
when the engine is started and the warning
systems ON indicator light
1illuminates on
the switch. You can turn the BSW system off by
pushing the warning systems switch on the
instrumental panel. This switch will turn on and
off the LDW, BSW and FCW systems at the same
time.
NOTE:
If you continue to push the warning systems
switch from off to on for over 4 seconds, a chime
will sound. This will change the default status of
the LDW, BSW and FCW systems to OFF so that
these systems will not automatically turn on
when the engine is started. If this procedure is
repeated, the default status will return to ON.
WARNING
● Do not use the BSW system when towing a
trailer because the system may not function
properly.
● Excessive noise (e.g. audio system volume,
open vehicle window) will interfere with the
chime sound, and it may not be heard.
● The radar sensors may not be able to detect
and activate BSW when certain objects are
present such as:
– Pedestrians, bicycles, animals
– Several types of vehicles such as motor- cycles
– Oncoming vehicles
– Vehicles remaining in the detection zone when you accelerate from a stop
(See “BSW DRIVING SITUATIONS” later in
this section)
– A vehicle merging into an adjacent lane at a speed approximately the same as your
vehicle
(See “BSW DRIVING SITUATIONS” later in
this section) – A vehicle approaching rapidly from be-
hind.
(See “BSW DRIVING SITUATIONS” later in
this section)
– A vehicle which your vehicle overtakes rapidly.
(See “BSW DRIVING SITUATIONS” later in
this section)
● Severe weather or road spray conditions
may reduce the ability of the radar to detect
other vehicles.
● The radar sensors detection zone is de-
signed based on a standard lane width.
When driving in a wider lane, the radar
sensors may not detect vehicles in an adja-
cent lane. When driving in a narrow lane, the
radar sensors may detect vehicles driving
two lanes away.
● The radar sensors are designed to ignore
most stationary objects, however objects
such as guardrails, walls, foliage and parked
vehicles may occasionally be detected. This
is a normal operating condition.
Starting and driving5-27

1. RESUME/ACCELERATE switch
2. SET/COAST switch
3. CANCEL switch
4. MAIN (ON·OFF) switch
CRUISE CONTROL OPERATIONS
The cruise control allows driving at a speed
between 25 to 89 MPH (40 to 144 km/h) without
keeping your foot on the accelerator pedal.
To turn on the cruise control,push the MAIN
switch on. The CRUISE indicator will come on.
To set cruising speed, accelerate your vehicle to
the desired speed, push the SET/COAST switch
and release it. (The CRUISE SET indicator will
come on in the instrument panel.) Take your foot off the accelerator pedal. Your vehicle will
maintain the set speed.
●
To pass another vehicle, depress the accel-
erator pedal. When you release the pedal,
the vehicle will return to the previously set
speed.
● The vehicle may not maintain the set speed
on winding or hilly roads. If this happens,
drive without the cruise control.
To cancel the preset speed, follow any of these
methods:
a) Push the CANCEL button. The SET indica- tor will go out.
b) Tap the brake pedal. The SET indicator will go out.
c) Move the selector lever to the N (Neutral) position. The SET indicator will go out.
d) Turn the MAIN switch off. Both the CRUISE indicator and SET indicator will go out.
●If you depress the brake pedal while pushing
the RESUME/ACCELERATE or SET/COAST
switch and reset at the cruising speed, the
cruise control will disengage. Turn the MAIN
switch off once and then turn it on again.
● The cruise control will automatically cancel if
the vehicle slows more than 8 MPH (12
km/h) below the set speed. ●
If you move the selector lever to the N
(Neutral) position, the cruise control will be
canceled.
To reset at a faster cruising speed, use one of
the following methods:
● Depress the accelerator pedal. When the
vehicle attains the desired speed, push and
release the SET/COAST switch.
● Push and hold the RESUME/ACCELERATE
switch. When the vehicle attains the speed
you desire, release the switch.
● Push, then quickly release the
RESUME/ACCELERATE switch. Each time you
do this, the set speed will increase by about
1 MPH (1.6 km/h).
To reset at a slower cruising speed, use one of
the following methods:
● Lightly tap the brake pedal. When the ve-
hicle attains the desired speed, push the
SET/COAST switch and release it.
● Push and hold the SET/COAST switch. Re-
lease the switch when the vehicle slows
down to the desired speed.
● Push, then quickly release the SET/COAST
switch. Each time you do this, the set speed
will decrease by about 1 MPH (1.6 km/h).
SSD0600
Starting and driving5-33

●The system is designed to automatically
check the sensor’s functionality. If the sen-
sor is covered with ice, a transparent or
translucent plastic bag, etc., the system may
not detect them. In these instances the sys-
tem may not be able to warn the driver prop-
erly. Be sure to check and clean the sensor
regularly.
● Excessive noise will interfere with the warn-
ing chime sound, and the chime may not be
heard.
● Never place your foot under the brake pedal
when the IBA system turns on. Your foot may
be caught when the system controls the
brake.
● A sudden appearance of a vehicle in front
(i.e., it abruptly cuts in) may not be detected
and the system may not warn the driver soon
enough.
● The system will be cancelled automatically
with a beep sound and the IBA warning light
will illuminate under the following
conditions:
– When the sensor window is dirty
– When the system malfunctions If the IBA OFF indicator light illuminates with a
beep sound, pull off the road to a safe location,
stop the vehicle and turn the engine off. Check
to see if the sensor window is dirty. If the
sensor window is dirty, clean it with a soft cloth
and restart the engine. If the sensor window is
not dirty, restart the engine. If the IBA OFF
indicator light continues to illuminate even if
the IBA system is turned on, have the system
checked by an INFINITI retailer.
IBA system operation
The IBA system will function when your vehicle
is driven at speeds of approximately 10 MPH (15
km/h) or above, and when the vehicle’s speed
is approximately 10 MPH (15 km/h) faster than
that of the vehicle ahead.
To turn the system off/on, push and hold the
IBA OFF switch
Bfor more than 1 second after
starting the engine. When the IBA OFF indicator
light
Aon the instrument panel turns off and
the IBA OFF switch is pushed, the system will
turn off and the IBA OFF indicator light will
illuminate. When the IBA OFF switch is pushed
again, the system will turn on and the IBA OFF
indicator light will turn off.
SSD0887
5-72Starting and driving

– For detailed information, see “WHEELSAND TIRES” in the “8. Maintenance and
do-it-yourself” section of this manual.
The Anti-lock Braking System (ABS) controls the
brakes so the wheels do not lock during hard
braking or when braking on slippery surfaces.
The system detects the rotation speed at each
wheel and varies the brake fluid pressure to
prevent each wheel from locking and sliding. By
preventing each wheel from locking, the system
helps the driver maintain steering control and
helps to minimize swerving and spinning on
slippery surfaces.
Using the system
Depress the brake pedal and hold it down.
Depress the brake pedal with firm steady pres-
sure, but do not pump the brakes. The ABS will
operate to prevent the wheels from locking up.
Steer the vehicle to avoid obstacles.
WARNING
Do not pump the brake pedal. Doing so may
result in increased stopping distances.
Self-test feature
The ABS includes electronic sensors, electric
pumps, hydraulic solenoids and a computer.
The computer has a built-in diagnostic feature
that tests the system each time you start the
engine and move the vehicle at a low speed in
forward or reverse. When the self-test occurs,
you may hear a “clunk” noise and/or feel a
pulsation in the brake pedal. This is normal and
does not indicate a malfunction. If the computer
senses a malfunction, it switches the ABS off
and illuminates the ABS warning light on the
instrument panel. The brake system then oper-
ates normally, but without anti-lock assistance.
If the ABS warning light illuminates during the
self-test or while driving, have the vehicle
checked by an INFINITI retailer.
Normal operation
The ABS operates at speeds above 3 to 6 MPH
(5 to 10 km/h). The speed varies according to
road conditions.
When the ABS senses that one or more wheels
are close to locking up, the actuator rapidly
applies and releases hydraulic pressure. This
action is similar to pumping the brakes very
quickly. You may feel a pulsation in the brake
pedal and hear a noise from under the hood or
feel a vibration from the actuator when it is
operating. This is normal and indicates that the
ABS is operating properly. However, the pulsa-
tion may indicate that road conditions are haz-
ardous and extra care is required while driving.
Starting and driving5-81

The Vehicle Dynamic Control (VDC) system uses
various sensors to monitor driver inputs and
vehicle motion. Under certain driving condi-
tions, the VDC system helps to perform the
following functions.
●Controls brake pressure to reduce wheel slip
on one slipping drive wheel so power is
transferred to a non slipping drive wheel on
the same axle.
● Controls brake pressure and engine output
to reduce drive wheel slip based on vehicle
speed (traction control function).
● Controls brake pressure at individual wheels
and engine output to help the driver main-
tain control of the vehicle in the following
conditions:
– understeer (vehicle tends to not follow the steered path despite increased steer-
ing input)
– oversteer (vehicle tends to spin due to certain road or driving conditions).
The VDC system can help the driver to maintain
control of the vehicle, but it cannot prevent loss
of vehicle control in all driving situations.
When the VDC system operates, the VDC warn-
ing light
in the instrument panel flashes
so note the following: ●
The road may be slippery or the system may
determine some action is required to help
keep the vehicle on the steered path.
● You may feel a pulsation in the brake pedal
and hear a noise or vibration from under the
hood. This is normal and indicates that the
VDC system is working properly.
● Adjust your speed and driving to the road
conditions.
See “Vehicle Dynamic Control (VDC) warning
light” in the “2. Instruments and controls”
section.
If a malfunction occurs in the system, the VDC
warning light
illuminates in the instru-
ment panel. The VDC system automatically
turns off.
The VDC OFF switch is used to turn off the VDC
system. The VDC off indicator
illuminates
to indicate the VDC system is off. When the VDC
switch is used to turn off the system, the VDC
system still operates to prevent one drive wheel
from slipping by transferring power to a non
slipping drive wheel. The VDC warning light
flashes if this occurs. All other VDC
functions are off, and the VDC warning light
will not flash. The VDC system is auto-
matically reset to on when the ignition switch is
placed in the off position then back to the on
position. See “Vehicle Dynamic Control (VDC) warning
light” in the “2. Instruments and controls”
section and “Vehicle Dynamic Control (VDC) off
indicator light” in the “2. Instruments and con-
trols” section.
The computer has a built-in diagnostic feature
that tests the system each time you start the
engine and move the vehicle forward or in
reverse at a slow speed. When the self-test
occurs, you may hear a “clunk” noise and/or
feel a pulsation in the brake pedal. This is
normal and is not an indication of a malfunc-
tion.
WARNING
●
The VDC system is designed to help improve
driving stability but does not prevent acci-
dents due to abrupt steering operation at
high speeds or by careless or dangerous
driving techniques. Reduce vehicle speed
and be especially careful when driving and
cornering on slippery surfaces and always
drive carefully.
VEHICLE DYNAMIC CONTROL (VDC)
SYSTEM
5-82Starting and driving

10 Index
A
ABS (Anti-lock Braking System) ........5-80
Adaptive front lighting system (AFS) .....2-37
Adjustable headrest .............. .1-9
Advanced air bag system ............1-42
Aiming control, Adaptive front lighting
system (AFS) .................. .2-37
Air bag system Advanced air bag system ..........1-42
Front passenger air bag and
status light ................. .1-44
Front-seat mounted side-impact
supplemental air bag system .......1-47
Roof-mounted curtain side-impact
supplemental air bag system .......1-47
Air bag warning labels .............1-49
Air bag warning light ...........1-49, 2-16
Air cleaner housing filter ............8-16
Air conditioner Air conditioner service ...........4-47
Air conditioner specification label .....9-12
Air conditioning system refrigerant and
lubricant recommendations .....4-47, 9-6
Automatic climate control .........4-39
In-cabin microfilter .............4-47
Alarm, How to stop alarm (see vehicle
security system) ................ .2-31
Alcohol, drugs and driving ...........5-7
All-wheel drive (AWD) ............. .5-74
All-wheel drive (AWD) warning light ......2-12
Antenna .................... .4-91Anti-lock Braking System (ABS)
........5-80
Anti-lock braking system (ABS) warning
light ....................... .2-12
Appearance care Exterior appearance care ..........7-2
Interior appearance care ...........7-4
Armrest ..................... .1-12
Around view monitor ............. .4-27
Audible reminders .............. .2-20
Audio operation precautions .........4-48
Audio system ................. .4-48
Steering wheel audio controls ......4-90
Autolight system ............... .2-35
Automatic Automatic

climate control ......4-40, 4-43
Automatic transmission fluid (ATF) . . . .8-11
Climate control .............. .4-39
Door locks .................. .3-5
Drive positioner .............. .3-24
Driving with automatic transmission . . .5-12
Moonroof .................. .2-52
Seat positioner .............. .3-24
Average fuel consumption and speed . . . .2-27
Avoiding collision and rollover .........5-5
B
Back door (See lift gate) ............3-16
Battery ..................... .8-13
Battery saver system ............2-36
Intelligent Key ............... .8-22
Variable voltage control system ......8-15Before starting the engine
...........5-11
Belts (See drive belts) .............8-15
Blind Spot Warning (BSW) system ......5-25
Blind Spot Warning (BSW) system warning
light ....................... .2-13
Bluetooth hands-free phone system
(models with navigation system) . . . . . . .4-93
Bluetooth hands-free phone system
(models without navigation system) . . . . .4-103
Bluetooth streaming audio ..........4-74
Booster seats ................. .1-34
Brake Anti-lock Braking System (ABS) ......5-80
Brake fluid ................. .8-12
Brake system ............... .5-77
Parking brake operation ..........5-16
Warning light ............... .2-13
Break-in schedule ............... .5-73
Brightness control Display ON/OFF button ...........4-8
Instrument panel ............. .2-38
Bulb check/instrument panel .........2-12
Bulb replacement ............... .8-24
C
Cabin

air filter ................. .4-47
Capacities and recommended
fuel/lubricants ................. .9-2
Car phone or CB radio .............4-92
Card holder .................. .2-47
Cargo cover .................. .2-48

FilterAir cleaner housing filter ..........8-16
Changing engine oil and filter ........8-8
Flashers (See hazard warning flasher
switch) ..................... .2-39
Flat tire ...................... .6-2
Flat towing ................... .9-17
Floor mat cleaning ................ .7-5
Fluid Automatic transmission fluid (ATF) .....8-11
Brake fluid ................. .8-12
Capacities and recommended fuel/
lubricants .................. .9-2
Engine coolant ................ .8-6
Engine oil .................. .8-8
Power steering fluid .............8-11
Window washer fluid .............8-12
FM-AM-SAT radio with Compact Disc (CD)
player ...................... .4-62
Fog light switch ................ .2-39
Forward Collision Warning (FCW) system . . .5-66
Front passenger air bag and status light . . .1-44
Front power seat adjustment ...........1-2
Front seat, Front seat adjustment ........1-2
Front-seat active head restraint .........1-9
Fuel Capacities and recommended fuel/
lubricants .................. .9-2
Fuel economy ................ .5-73
Fuel economy information (display) . . . .4-10
Fuel octane rating .............. .9-3
Fuel recommendation .............9-3
Fuel-filler cap ................ .3-17
Fuel-filler door ............... .3-17
Gauge .................... .2-8
LOOSE FUEL CAP warning ..........3-19Fuses
...................... .8-20
Fusible links .................. .8-20
G
Garage door opener, HomeLink Universal
Transceiver ................... .2-57
Gascap..................... .3-17
Gauge ....................... .2-5
Engine coolant temperature gauge .....2-7
Fuel
gauge .................. .2-8
Odometer ................... .2-6
Speedometer ................. .2-6
Tachometer .................. .2-7
Trip computer ................ .2-27
General maintenance .............. .8-2
Glove box .................... .2-46
H
Hands-free phone system, Bluetooth
(models with navigation system) ........4-93
Hands-free phone system, Bluetooth
(models without navigation system) .....4-103
Hazard warning flasher switch .........2-39
Head restraints .................. .1-6
Headlights Aiming control (See adaptive front
lighting system (AFS)) ............2-37
Bulb replacement ............. .8-25
Headlight switch .............. .2-35
Xenon headlights ............. .2-34
Headrest, Adjustable headrest ..........1-9
Heated seats .................. .2-40Heater
Automatic climate control ..........4-39
Engine block heater .............5-85
HomeLink Universal Transceiver ........2-57
Hood release .................. .3-16
Hook Coat hooks ................. .2-48
Luggage hook ............... .2-48
Horn ....................... .2-40
I
Ignition switch (Push-button) ...........5-8
Immobilizer system .............. .2-31
In-cabin microfilter ............... .4-47
Indicator Dot matrix display ............. .2-20
Lights .................... .2-17
INFINITI

Vehicle Immobilizer System . .....2-31
INFINITI voice recognition system .......4-116
INFO button ................... .4-8
Inside mirror .................. .3-21
Inspection/maintenance (I/M) test . . . . . . .9-20
Instrument brightness control .........2-38
Instrument panel ................ .2-4
Intelligent Brake Assist (IBA) off indicator
light ....................... .2-18
Intelligent Brake Assist (IBA) system .....5-69
Intelligent cruise control (ICC) system,
Preview function ................ .5-54
Intelligent Cruise Control (ICC) system (Full
Speed Range) .................. .5-34
Intelligent Cruise Control (ICC) system
warning light .................. .2-14
Intelligent Key .................. .3-2
10-3