seats INFINITI EX 2011 Repair Manual

To stow the cargo cover, remove it from the
hooks and hold until it is retracted. Make sure
that the cargo cover is snapped into the holders
2to keep it from moving around while driving.To remove the cargo cover, stow the cover and
pull the holder to the opposite side
3.
WARNING
●
Never put anything on the cargo cover, no
matter how small. Any object on it could
cause an injury in an accident or sudden
stop.
● Do not leave the cargo cover in the vehicle
with it disengaged from the holder.
● Properly secure all cargo with ropes or
straps to help prevent it from sliding or shift-
ing. Do not place cargo higher than the seat-
backs. In a sudden stop or collision, unse-
cured cargo could cause personal injury. ●
If the cargo cover contacts the top tether
strap when it is attached to the top tether
anchor, remove the cargo cover from the ve-
hicle or secure it on the cargo floor below its
attachment location. If the cargo cover is not
removed, it may damage the top tether strap
during a collision. Your child could be seri-
ously injured or killed in a collision if the
child restraint top tether strap is damaged.
● Do not allow cargo to contact the top tether
strap when it is attached to the top tether
anchor. Properly secure the cargo so it does
not contact the top tether strap. Cargo that is
not properly secured or cargo that contacts
the top tether strap may damage the top
tether strap during a collision. Your child
could be seriously injured or killed in a colli-
sion if the child restraint top tether strap is
damaged.
● Do not use the cargo cover if the rear seats
are folded down.
SIC3637SIC3638
Instruments and controls2-49

The seat synchronization function operates un-
der the following conditions:
●The ignition switch is in the ON position.
● The selector lever is in the P (Park) position.
If the outside mirrors or the steering wheel
reaches its maximum adjustment, the function
is automatically disabled. Restart the function
by selecting a previously stored seat memory
position using the memory switches (1 or 2). An
Intelligent Key that was previously linked to the
stored seat memory can also be used to restart
the function.
If a seat position was not previously stored in
the seat memory, restart the function by adjust-
ing the steering wheel and outside mirrors
manually for your best driving position and then
drive the vehicle above 4 MPH (7 km/h).
Cancel or activate seat
synchronization function
The selector lever must be in the P (Park)
position with the ignition switch in the ACC
position.
The seat synchronization function can be acti-
vated or canceled by pushing and holding the
SET switch for more than 10 seconds while the
ignition switch is in the ACC position. The indicator lights on the memory switches
(1 and 2) will blink once when the function is
canceled, and the indicator lights will blink
twice when the function is activated.
MEMORY STORAGE
Two positions for the driver’s seat, steering
column and outside mirrors can be stored in the
automatic drive positioner memory. Follow
these procedures to use the memory system.
1. Move the selector lever to the P (Park)
position.
2. Push the ignition switch to the ON posi- tion.
3. Adjust the driver’s seat, steering column and outside mirrors to the desired posi-
tions by manually operating each adjust-
ing switch. For additional information, see
“SEATS” in the “1. Safety — Seats, seat
belts and supplemental restraint system”
section and “TILT/TELESCOPIC COLUMN”
page 3-19 and “OUTSIDE MIRRORS” ear-
lier in this section. 4. Push the SET switch and, within 5 sec-
onds, push the memory switch (1 or 2)
fully for at least 1 second.
The indicator light for the pushed memory
switch will stay on for approximately 5 sec-
onds after pushing the switch.
If memory is stored in the same memory
switch, the previous memory will be deleted.
Linking Intelligent Key to a stored
memory position
The Intelligent Key can be linked to a stored
memory position with the following procedure.
1. Follow the steps for storing a memoryposition.
2. While the indicator light for the memory switch being set is illuminated for 5 sec-
onds, push the UNLOCK
button on
the Intelligent Key. If the indicator light
blinks, the Intelligent Key is linked to that
memory setting.
Push the ignition switch to the OFF position,
and then push the UNLOCKbutton on the
Intelligent Key. The driver’s seat, steering wheel
and outside mirrors will move to the memorized
position or to the exit position when the
entry/exit function is set to active.
3-26Pre-driving checks and adjustments

●If a computer (or similar equipment) or a
DC/AC converter is being used in or near the
vehicle.
FCC Notice:
For USA:
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interfer-
ence that may cause undesired operation.
Note: Changes or modifications not expressly
approved by the party responsible for compli-
ance could void the user’s authority to operate
the equipment.
For Canada:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may
cause undesired operation of the device.AVOIDING COLLISION AND ROLLOVER
WARNING
Failure to operate this vehicle in a safe and
prudent manner may result in loss of control or
an accident.
Be alert and drive defensively at all times. Obey
all traffic regulations. Avoid excessive speed,
high speed cornering, or sudden steering ma-
neuvers, because these driving practices could
cause you to lose control of your vehicle. As
with any vehicle, a loss of control could result in
a collision with other vehicles or objects, or
cause the vehicle to rollover, particularly if the
loss of control causes the vehicle to slide side-
ways. Be attentive at all times, and avoid
driving when tired. Never drive when under the
influence of alcohol or drugs (including pre-
scription or over-the-counter drugs which may
cause drowsiness). Always wear your seat belt
as outlined in the “SEAT BELTS” in the “1. Safety
— Seats, seat belts and supplemental restraint
system” section of this manual, and also in-
struct your passengers to do so.
Seat belts help reduce the risk of injury in
collisions and rollovers. In a rollover crash, an
unbelted or improperly belted person is signifi- cantly more likely to be injured or killed than a
person properly wearing a seat belt.ON-PAVEMENT AND OFF-ROAD
DRIVING PRECAUTIONS
Utility vehicles have a significantly higher roll-
over rate than other types of vehicles.
They have higher ground clearance than pas-
senger cars to make them capable of perform-
ing in a variety of on-pavement and off-road
applications. This gives them a higher center of
gravity than ordinary cars. An advantage of
higher ground clearance is a better view of the
road, allowing you to anticipate problems. How-
ever, they are not designed for cornering at the
same speeds as conventional passenger cars
any more than low-slung sports cars are de-
signed to perform satisfactorily under off-road
conditions. If at all possible, avoid sharp turns
or abrupt maneuvers, particularly at high
speeds. As with other vehicles of this type,
failure to operate this vehicle correctly may
result in loss of control or vehicle rollover. Seat
belts help reduce the risk of injury in collisions
and rollovers. In a rollover crash, an unbelted or
improperly belted person is significantly more
likely to be injured or killed than a person
properly wearing a seat belt.
Starting and driving5-5

TIRE DRESSING
INFINITI does not recommend the use of tire
dressings. Tire manufacturers apply a coating
to the tires to help reduce discoloration of the
rubber. If a tire dressing is applied to the tires,
it may react with the coating and form a com-
pound. This compound may come off the tire
while driving and stain the vehicle paint.
If you choose to use a tire dressing, take the
following precautions:
●Use a water-based tire dressing. The coating
on the tire dissolves more easily with an
oil-based tire dressing.
● Apply a light coat of tire dressing to help
prevent it from entering the tire
tread/grooves (where it would be difficult to
remove).
● Wipe off excess tire dressing using a dry
towel. Make sure the tire dressing is com-
pletely removed from the tire tread/grooves.
● Allow the tire dressing to dry as recom-
mended by tire dressing manufacturer. Occasionally remove loose dust from the inte-
rior trim, plastic parts and seats using a vacuum
cleaner or soft bristled brush. Wipe the vinyl
and leather surfaces with a clean, soft cloth
dampened in mild soap solution, then wipe
clean with a dry soft cloth.
Regular care and cleaning is required in order to
maintain the appearance of the leather.
Before using any fabric protector, read the
manufacturer’s recommendations. Some fabric
protectors contain chemicals that may stain or
bleach the seat material.
Use a cloth dampened only with water, to clean
the meter and gauge lens.
WARNING
Do not use water or acidic cleaners (hot steam
cleaners) on the seat. This can damage the seat
or occupant classification sensors. This can
also affect the operation of the air bag system
and result in serious personal injury.
CAUTION
●
Never use benzine, thinner, or any similar
material. ●
Small dirt particles can be abrasive and dam-
aging to the leather surfaces and should be
removed promptly. Do not use saddle soap,
car waxes, polishes, oils, cleaning fluids,
solvents, detergents or ammonia-based
cleaners as they may damage the leather’s
natural finish.
● Only use fabric protectors approved by
INFINITI.
● Do not use glass or plastic cleaner on meter
or gauge lens covers. It may damage the lens
cover.
AIR FRESHENERS
Most air fresheners use a solvent that could
affect the vehicle interior. If you use an air
freshener, take the following precautions:
● Hanging-type air fresheners can cause per-
manent discoloration when they contact ve-
hicle interior surfaces. Place the air fresh-
ener in a location that allows it to hang free
and not contact an interior surface.
● Liquid-type air fresheners typically clip on
the vents. These products can cause imme-
diate damage and discoloration when
spilled on interior surfaces.
CLEANING INTERIOR
7-4Appearance and care

Carefully read and follow the manufacturer’s
instructions before using air fresheners.
FLOOR MATS
WARNING
To avoid potential pedal interference that may
result in a collision or injury:
●NEVER place a floor mat on top of another
floor mat in the driver front position.
● Use only genuine NISSAN floor mats specifi-
cally designed for use in your vehicle model.
See your INFINITI retailer for more
information.
● Properly position the mats in the floorwell
using the floor mat positioning aid. See
“Floor mat positioning aid” later in this
section.
The use of genuine NISSAN floor mats can
extend the life of your vehicle carpet and make
it easier to clean the interior. Mats should be
maintained with regular cleaning and replaced
if they become excessively worn.
Floor mat positioning aid
This model includes front floor mat brackets to
act as floor mat positioning aid. NISSAN floor
mats have been specially designed for your
vehicle model. The front floor mats have grom-
met holes in them. To install, simply position
the mat by placing the floor mat bracket
through the floor mat grommet hole while cen-
tering the mat in the floorwell.
Periodically check to make certain that the mats
are properly positioned. The illustration shows the location of the floor
mat brackets.
SEAT BELTS
The seat belts can be cleaned by wiping them
with a sponge dampened in a mild soap solu-
tion. Allow the belts to dry completely before
using them.
See “SEAT BELTS” in the “1. Safety — Seats,
seat belts and supplemental restraint system”
section.
SAI0039
Bracket positions
SAI0055
Appearance and care7-5

When driving in areas using road salt or other
corrosive materials, check lubrication fre-
quently.
Lights*:Clean the headlights on a regular
basis. Make sure that the headlights, stop
lights, tail lights, turn signal lights, and other
lights are all operating properly and installed
securely. Also check headlight aim.
Road wheel nuts (lug nuts)*: When checking the
tires, make sure no wheel nuts are missing, and
check for any loose wheel nuts. Tighten if
necessary.
Tire rotation*: Tires should be rotated every
7,500 miles (12,000 km).
Tires*: Check the pressure with a gauge often
and always prior to long distance trips. If nec-
essary, adjust the pressure in all tires, includ-
ing the spare, to the pressure specified. Check
carefully for damage, cuts or excessive wear.
Tire Pressure Monitoring System (TPMS) trans-
mitter components: Replace the TPMS transmit-
ter grommet seal, valve core and cap when the
tires are replaced due to wear or age.
Tire, wheel alignment and balance: If the vehicle
should pull to either side while driving on a
straight and level road, or if you detect uneven
or abnormal tire wear, there may be a need for
wheel alignment. If the steering wheel or seat vibrates at normal
highway speeds, wheel balancing may be
needed.
For additional information regarding tires, refer
to “Important Tire Safety Information” (US) or
“Tire Safety Information” (Canada) in the
INFINITI Warranty Information Booklet.
Windshield:
Clean the windshield on a regular
basis. Check the windshield at least every six
months for cracks or other damage. Have a
damaged windshield repaired by a qualified
repair facility.
Windshield wiper blades*: Check for cracks or
wear if they do not wipe properly.
Inside the vehicle
The maintenance items listed here should be
checked on a regular basis, such as when
performing periodic maintenance, cleaning the
vehicle, etc.
Accelerator pedal: Check the pedal for smooth
operation and make sure the pedal does not
catch or require uneven effort. Keep the floor
mat away from the pedal.
Automatic transmission P (Park) mechanism: On
a fairly steep hill, check that your vehicle is held
securely with the selector lever in the P (Park)
position without applying any brakes. Brake pedal:
Check the pedal for smooth opera-
tion. If the brake pedal suddenly goes down
further than normal, the pedal feels spongy or
the vehicle seems to take longer to stop, see an
INFINITI retailer immediately. Keep the floor mat
away from the pedal.
Brakes: Check that the brakes do not pull the
vehicle to one side when applied.
Parking brake: Check the parking brake opera-
tion regularly. The vehicle should be securely
held on a fairly steep hill with only the parking
brake applied. If the parking brake needs ad-
justed, see an INFINITI retailer.
Seat belts: Check that all parts of the seat belt
system (for example, buckles, anchors, adjuster
and retractors) operate properly and smoothly,
and are installed securely. Check the belt web-
bing for cuts, fraying, wear or damage.
Seats: Check seat position controls such as
seat adjusters, seatback recliner, etc. to ensure
they operate smoothly and that all latches lock
securely in every position. Check that the head
restraint/headrest moves up and down
smoothly and that the locks (if so equipped)
hold securely in all latched positions.
Steering wheel: Check for changes in the steer-
ing conditions, such as excessive free play,
hard steering or strange noises.
Maintenance and do-it-yourself8-3

Use the following steps to mount the license
plate.
Before mounting the license plate, confirm that
the following parts are enclosed in the plastic
bag.
Only use the recommended mounting position
or Intelligent Cruise Control (ICC) sensor ob-
struction (if so equipped) may result.
●License plate bracket
● J-nut × 2
● Screw × 2
● Screw grommet × 2
1. Park the vehicle on flat, level ground.
2. Place the license plate bracket with the
positioner
Afit to the bumper pillarB
and the side end surface of the bracket
aligned with the bumper
C.
3. Mark the center of the hole
Dwith a
felt-tip pen.
4. Carefully drill two pilot holes using a 0.39 in (10 mm) drill bit at the marked loca-
tions. (Be sure that the drill only goes
through the bumper fascia.)
5. Insert grommets into the hole on the fascia.
6. Insert a flat-blade screwdriver into the grommet hole to add 90° turn onto the
part
E. 7. Insert a J-nut into the license plate bracket
before placing the license plate bracket
on the fascia.
8. Install the license plate bracket with screws.
9. Install the license plate with bolts that are no longer than 0.55 in (14 mm).
WARNING
●It is extremely dangerous to ride in a
cargo area inside the vehicle. In a colli-
sion, people riding in these areas are
more likely to be seriously injured or
killed.
●Do not allow people to ride in any area
of vehicle that is not equipped with
seats and seat belts.
●Be sure everyone in your vehicle is in a
seat and using a seat belt properly.
TERMS
It is important to familiarize yourself
with the following terms before loading
your vehicle:
●Curb Weight (actual weight of your
vehicle) - vehicle weight including:
standard and optional equipment, flu-
ids, emergency tools, and spare tire
assembly. This weight does not
include
passengers and cargo.
VEHICLE LOADING INFORMATION
Technical and consumer information9-13

10 Index
A
ABS (Anti-lock Braking System) ........5-80
Adaptive front lighting system (AFS) .....2-37
Adjustable headrest .............. .1-9
Advanced air bag system ............1-42
Aiming control, Adaptive front lighting
system (AFS) .................. .2-37
Air bag system Advanced air bag system ..........1-42
Front passenger air bag and
status light ................. .1-44
Front-seat mounted side-impact
supplemental air bag system .......1-47
Roof-mounted curtain side-impact
supplemental air bag system .......1-47
Air bag warning labels .............1-49
Air bag warning light ...........1-49, 2-16
Air cleaner housing filter ............8-16
Air conditioner Air conditioner service ...........4-47
Air conditioner specification label .....9-12
Air conditioning system refrigerant and
lubricant recommendations .....4-47, 9-6
Automatic climate control .........4-39
In-cabin microfilter .............4-47
Alarm, How to stop alarm (see vehicle
security system) ................ .2-31
Alcohol, drugs and driving ...........5-7
All-wheel drive (AWD) ............. .5-74
All-wheel drive (AWD) warning light ......2-12
Antenna .................... .4-91Anti-lock Braking System (ABS)
........5-80
Anti-lock braking system (ABS) warning
light ....................... .2-12
Appearance care Exterior appearance care ..........7-2
Interior appearance care ...........7-4
Armrest ..................... .1-12
Around view monitor ............. .4-27
Audible reminders .............. .2-20
Audio operation precautions .........4-48
Audio system ................. .4-48
Steering wheel audio controls ......4-90
Autolight system ............... .2-35
Automatic Automatic

climate control ......4-40, 4-43
Automatic transmission fluid (ATF) . . . .8-11
Climate control .............. .4-39
Door locks .................. .3-5
Drive positioner .............. .3-24
Driving with automatic transmission . . .5-12
Moonroof .................. .2-52
Seat positioner .............. .3-24
Average fuel consumption and speed . . . .2-27
Avoiding collision and rollover .........5-5
B
Back door (See lift gate) ............3-16
Battery ..................... .8-13
Battery saver system ............2-36
Intelligent Key ............... .8-22
Variable voltage control system ......8-15Before starting the engine
...........5-11
Belts (See drive belts) .............8-15
Blind Spot Warning (BSW) system ......5-25
Blind Spot Warning (BSW) system warning
light ....................... .2-13
Bluetooth hands-free phone system
(models with navigation system) . . . . . . .4-93
Bluetooth hands-free phone system
(models without navigation system) . . . . .4-103
Bluetooth streaming audio ..........4-74
Booster seats ................. .1-34
Brake Anti-lock Braking System (ABS) ......5-80
Brake fluid ................. .8-12
Brake system ............... .5-77
Parking brake operation ..........5-16
Warning light ............... .2-13
Break-in schedule ............... .5-73
Brightness control Display ON/OFF button ...........4-8
Instrument panel ............. .2-38
Bulb check/instrument panel .........2-12
Bulb replacement ............... .8-24
C
Cabin

air filter ................. .4-47
Capacities and recommended
fuel/lubricants ................. .9-2
Car phone or CB radio .............4-92
Card holder .................. .2-47
Cargo cover .................. .2-48

Cargo light................... .2-56
Catalytic converter, Three way catalyst .....5-2
CD/CF/USB memory care and cleaning . . . .4-88
Center multi-function control panel .......4-2
Child restraints ................. .1-20
Booster seats ................ .1-34
LATCH system ................ .1-22
Precautions on child restraints .......1-21
Child safety ................... .1-19
Child safety rear door lock ............3-6
Chimes Audible reminders ............. .2-20
Seat belt warning light and chime .....2-16
Circuit breaker, Fusible link ..........8-20
Cleaning exterior and interior ........7-2, 7-4
Climate control, Automatic climate control . .4-39
Clock ...................... .2-44
Coat hooks ................... .2-48
Cockpit ...................... .2-2
Cold weather driving .............. .5-83
Compact Disc (CD) player (See audio
system) ..................... .4-65
Compact spare tire ............... .8-37
Compass ..................... .2-8
Console box .................. .2-47
Controller, Center multi-function control
panel ....................... .4-5
Controls Control panel button .............4-2
INFINITI Controller .............. .4-5
Coolant Capacities and recommended fuel/
lubricants .................. .9-2
Changing engine coolant ...........8-8
Checking engine coolant level ........8-7
Corrosion protection .............. .7-6Cover, Cargo cover
............... .2-48
Cruise control .................. .5-32
Fixed speed cruise control (on ICC
system) ................... .5-50
Cup holders ................... .2-45
Current fuel consumption ............2-27
D
Daytime

running light system ..........2-37
Defroster switch, Rear window and
outside mirror defroster switch .........2-34
Dimensions ................... .9-9
Distance Control Assist (DCA) system .....5-54
Distance Control Assist (DCA) system
warning light .................. .2-14
Distance to empty ............... .2-28
Door/lift gate open warning ..........2-24
Dot matrix liquid crystal display ........2-20
Drive belts ................... .8-15
Drive positioner ................ .3-24
Driving All-wheel drive (AWD) ............5-74
All-wheel drive (AWD) safety precautions . .5-7
Cold weather driving .............5-83
Driving with automatic transmission . . . .5-12
On-pavement and off-road driving ......5-5
Precautions when starting and driving . . .5-2
DS (Drive Sport) mode ..............5-14
DVD player operation ............. .4-66
E
Economy, Fuel ................. .5-73
Elapsed time .................. .2-27Elapsed time and trip odometer . . .
.....2-27
Emission control information label .......9-11
Emission control system warranty . ......9-18
Engine Before starting the engine ..........5-11
Break-in schedule ............. .5-73
Capacities and recommended fuel/
lubricants .................. .9-2
Changing engine coolant ...........8-8
Changing engine oil and filter ........8-8
Checking engine coolant level ........8-7
Checking engine oil level ...........8-8
Coolant temperature gauge .........2-7
Emergency engine shut off .........5-10
Engine block heater .............5-85
Engine compartment check locations . . . .8-6
Engine

cooling system............8-6
Engine oil .................. .8-8
Engine oil and oil filter recommendation . .9-5
Engine oil replacement indicator ......2-26
Engine oil viscosity ............. .9-5
Engine serial number ............9-10
Engine specifications .............9-7
Engine start operation indicator . . . . . .2-23
If your vehicle overheats ..........6-10
Starting the engine ............. .5-11
Entry/exit function, Automatic drive
positioner .................... .3-24
Event Data Recorders (EDR) ...........9-21
Exhaust gas (carbon monoxide) .........5-2
F
F.M.V.S.S./C.M.V.S.S. certification label . . . .9-11
10-2

FilterAir cleaner housing filter ..........8-16
Changing engine oil and filter ........8-8
Flashers (See hazard warning flasher
switch) ..................... .2-39
Flat tire ...................... .6-2
Flat towing ................... .9-17
Floor mat cleaning ................ .7-5
Fluid Automatic transmission fluid (ATF) .....8-11
Brake fluid ................. .8-12
Capacities and recommended fuel/
lubricants .................. .9-2
Engine coolant ................ .8-6
Engine oil .................. .8-8
Power steering fluid .............8-11
Window washer fluid .............8-12
FM-AM-SAT radio with Compact Disc (CD)
player ...................... .4-62
Fog light switch ................ .2-39
Forward Collision Warning (FCW) system . . .5-66
Front passenger air bag and status light . . .1-44
Front power seat adjustment ...........1-2
Front seat, Front seat adjustment ........1-2
Front-seat active head restraint .........1-9
Fuel Capacities and recommended fuel/
lubricants .................. .9-2
Fuel economy ................ .5-73
Fuel economy information (display) . . . .4-10
Fuel octane rating .............. .9-3
Fuel recommendation .............9-3
Fuel-filler cap ................ .3-17
Fuel-filler door ............... .3-17
Gauge .................... .2-8
LOOSE FUEL CAP warning ..........3-19Fuses
...................... .8-20
Fusible links .................. .8-20
G
Garage door opener, HomeLink Universal
Transceiver ................... .2-57
Gascap..................... .3-17
Gauge ....................... .2-5
Engine coolant temperature gauge .....2-7
Fuel
gauge .................. .2-8
Odometer ................... .2-6
Speedometer ................. .2-6
Tachometer .................. .2-7
Trip computer ................ .2-27
General maintenance .............. .8-2
Glove box .................... .2-46
H
Hands-free phone system, Bluetooth
(models with navigation system) ........4-93
Hands-free phone system, Bluetooth
(models without navigation system) .....4-103
Hazard warning flasher switch .........2-39
Head restraints .................. .1-6
Headlights Aiming control (See adaptive front
lighting system (AFS)) ............2-37
Bulb replacement ............. .8-25
Headlight switch .............. .2-35
Xenon headlights ............. .2-34
Headrest, Adjustable headrest ..........1-9
Heated seats .................. .2-40Heater
Automatic climate control ..........4-39
Engine block heater .............5-85
HomeLink Universal Transceiver ........2-57
Hood release .................. .3-16
Hook Coat hooks ................. .2-48
Luggage hook ............... .2-48
Horn ....................... .2-40
I
Ignition switch (Push-button) ...........5-8
Immobilizer system .............. .2-31
In-cabin microfilter ............... .4-47
Indicator Dot matrix display ............. .2-20
Lights .................... .2-17
INFINITI

Vehicle Immobilizer System . .....2-31
INFINITI voice recognition system .......4-116
INFO button ................... .4-8
Inside mirror .................. .3-21
Inspection/maintenance (I/M) test . . . . . . .9-20
Instrument brightness control .........2-38
Instrument panel ................ .2-4
Intelligent Brake Assist (IBA) off indicator
light ....................... .2-18
Intelligent Brake Assist (IBA) system .....5-69
Intelligent cruise control (ICC) system,
Preview function ................ .5-54
Intelligent Cruise Control (ICC) system (Full
Speed Range) .................. .5-34
Intelligent Cruise Control (ICC) system
warning light .................. .2-14
Intelligent Key .................. .3-2
10-3