brake INFINITI FX 2013 Quick Reference Guide

*See your Owner’s Manual for information.
01
INSTRUMENT BRIGHTNESS CONTROL*
02
TRIP COMPUTER SWITCHES
03
LOW TIRE PRESSURE WARNING LIGHT
04
PADDLE SHIFTERS*
05
HEADLIGHT AND TURN SIGNAL CONTROL
06
WINDSHIELD WIPER /WASHER SWITCH
07
TRIP A/B RESET SWITCH*
08
STEERING WHEEL SWITCHES FOR
AUDIO* / BLUETOOTH® / NAvIGATION
09
INTELLIGENT CRUISE CONTROL
10
OUTSIDE MIRROR CONTROL SWITCH
11
INTELLIGENT BRAKE ASSIST (IBA)
OFF SWITCH*
12
POWER LIFTGATE SWITCH
01
0404
0605
07
22
23161718
19
20
111213
14
02
03
21
13
POWER LIFTGATE MAIN SWITCH
14
DYNAMIC DRIvER ASSISTANCE SWITCH*
15
TILT / TELESCOPIC STEERING
WHEEL SWITCH*
16
WARNING SYSTEMS SWITCH*
17 vEHICLE DYNAMIC CONTROL (vDC)
OFF SWITCH*
18
INTELLIGENT KEY PORT*
19
HOOD RELEASE*
20
CONTROL PANEL DISPLAY SCREEN*
21
AUDIO SYSTEM
22
AUTOMATIC CLIMATE CONTROLS
23
FRONT PASSENGER AIR BAG
STATUS LIGHT*
10
09Behind
steering wheel
Behind
steering wheel
On steering column Behind
steering wheel
15
08

10
first drive features
Starting/Stopping the Engine
NOTE: It is important to make sure the INFINITI Intelligent
Key™ is with you (that is, in your pocket or purse).

Depress the brake pedal.
• If the brake pedal is not depressed, pushing the
ignition switch once enters the ACC mode.
• If the ignition switch is pushed a second time, the
vehicle will enter the ON mode.

Move the shift lever to P (PARK).

Push the ignition switch to start the engine.
TURNING THE ENGINE OFF

Move the shift lever to the P (PARK) position and apply the parking brake.

Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch
Turn the headlight control switch to the position

01 to turn on the front parking, side marker, tail,

license plate and instrument panel lights. Turn the
switch to the

position
02 to turn on the

headlights.
AUTOLIGHT SYSTEM

The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.

To activate the autolight system, turn the headlight control switch to the AUTO position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight

control switch to the Off,

01 or
position
02 .

HIGH BEAM SELECT

Push the headlight control switch forward
04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.

Pull and release the headlight control switch
05 to
flash the headlight high beams on and off.
03
04
05
01
02

15
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.

The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

To activate the cruise control, push the CRUISE ON/Off
switch

01 . The CRUISE indicator light in the
instrument panel will illuminate.

To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST/SET switch

02 and

release. The CRUISE SET indicator light
in the instrument panel will illuminate. Take your foot

off the accelerator pedal. Your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL/RES switch
03 . When the

vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAST/SET switch
02 . Release the

switch when the vehicle slows to the desired speed.

To cancel the preset speed, tap the brake pedal or push the CANCEL switch
04 .

To turn off cruise control, push the CRUISE ON/Off switch
01 . Both the CRUISE indicator

light and the SET indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
01
02
0304
USB/iPod® Interface

The USB jack
01 is located in the center console under

the arm rest.

When a compatible USB memory device or iPod®
is plugged into the USB jack, compatible
audio and video files stored on the device can
be played through the vehicle’s audio system
and front display.
For more information, refer to the “Monitor, climate, audio, phone
and voice recognition systems (section 4)” of your Owner’s Manual.01

Intelligent Cruise Control (ICC) System (if so equipped)
vEHICLE-TO-vEHICLE DISTANCE CONTROL MODE

To set vehicle-To- vehicle Distance Control mode,
press the CRUISE ON/Off button

01 for less than
1.5 seconds. The CRUISE indicator light
02 will

illuminate.

Accelerate to the desired speed.

Push down on the COAST/SET switch
03 and release
it. Cruise control will be set to the desired speed.

Press the distance button
04 repeatedly to change
the set distance between long, middle, and short.

When a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed indicator
lights will illuminate

05 in set mode.

When a vehicle is detected ahead of you in the lane,
the vehicle ahead detection, set distance, and set
vehicle speed indicator lights will illuminate

06 in set mode.

To reset at a faster cruising speed, push and hold the ACCEL/RES
switch

07 . When the vehicle attains the desired speed, release
the switch.

To reset at a slower cruising speed, push and hold the COAST/SET switch
03 . Release

the switch when the vehicle slows to the desired speed.


To cancel the preset speed, push the CANCEL switch
08 or tap the brake pedal. The set
vehicle speed indicator 05 will go out.

To turn off cruise control, press the CRUISE ON/Off button
01 . The
CRUISE indicator light

02 , in the instrument panel, will turn off.
To set conventional (fixed speed) cruise control mode:

While cruise control is off, press the CRUISE ON/Off
button
01 and hold it down for more
than 1.5 seconds. The CRUISE indicator light will illuminate.

Accelerate to the desired speed.

Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise control should be set to the desired speed.
To switch between the two cruise control modes:

When one of the two cruise modes is in use, you must turn the system off, and then turn it on
again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
16
first drive features
0807
0304
01
0205
06

24
system guide
07 INfO button – Press to display the fuel economy, tire pressure, maintenance, location, traffic

information (if so equipped) and weather information (if so equipped).
08 button – Press to switch between the day screen (bright) and the night screen (dark).

Press and hold to turn off the display. Press again to turn on the display.
09 ZOOM IN button – Press to zoom the map in.

10 MAP button – Press to display the map. While following a programmed route, press multiple

times to change the type of route information displayed.
11 SETTING button – Press to access the system settings.

12 BACK
button – Press to return to the previous screen. In a settings screen, this button is also
used to apply the setting. In a character input screen, this button is also used to delete the
characters that have been entered.
13 VOICE button – Press to hear the current guidance for a programmed route.

For more information, please refer to your Navigation System Owner’s Manual.
DVD Player (if so equipped)

This system allows you to play video files via a D vD
or CD from the front display.

To view movies on the front display, stop the vehicle
in a safe location, move the shift lever to the
P (PARK) position and apply the parking brake.

To reduce driver distraction, movies will not be shown
on the front display while the vehicle is in any drive
position.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.