brake INFINITI FX35 2007 Service Manual
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2007, Model line: FX35, Model: INFINITI FX35 2007Pages: 4366, PDF Size: 55.42 MB
Page 1326 of 4366
DI-80
LANE DEPARTURE WARNING SYSTEM
Revision: 2006 July 2007 FX35/FX45
Action TestNKS00314
LDW SYSTEM RUNNING TEST
WARNING:
Be careful when performing road test.
Understand “Precautions” and “System Description” well before the road test. Refer to DI-77,
"Precautions for Lane Departure Warning (LDW) system" and DI-77, "System Description" .
Function Check
Check the LDW system operation according to the condition that the warning function works. Refer to DI-77,
"LDW SYSTEM OPERATION" .
Camera Aiming AdjustmentNKS00315
OUTLINE
Adjust the camera aiming every time the LDW camera unit is removed or installed.
CAUTION:
Place the vehicle on the level ground when the camera aiming adjustment is operated.
Follow the CONSULT-II when adjusting the camera aiming. (Camera aiming adjustment cannot be
operated without CONSULT-II.)
PREPARATION
Keep all tires inflated to correct pressures. Adjust the tire pressure to the specified pressure value.
There is no-load in vehicle. Check if coolant, engine oil are filled up to correct level and fuel tank is full.
Shift the gear into “P” position and release the parking brake.
Clean the windshield.
NOTE:
Do not place anything reflective on the upper surface of instrument panel.
TARGET SETTING
Preparation Aiming Adjustment Jig
For aiming adjustment, prepare the following jigs and targets.
PKIB4693E
Page 1382 of 4366
EC-6Revision: 2006 July 2007 FX35/FX45
On Board Diagnosis Logic ...................................
.513
DTC Confirmation Procedure .............................. .513
Diagnostic Procedure .......................................... .513
DTC P1564 ICC STEERING SWITCH ................... .515
Component Description ....................................... .515
CONSULT-II Reference Value in Data Monitor Mode .515
On Board Diagnosis Logic ................................... .515
DTC Confirmation Procedure .............................. .516
Wiring Diagram .................................................... .517
Diagnostic Procedure .......................................... .518
Component Inspection ......................................... .521
DTC P1564 ASCD STEERING SWITCH ............... .522
Component Description ....................................... .522
CONSULT-II Reference Value in Data Monitor Mode .522
On Board Diagnosis Logic ................................... .522
DTC Confirmation Procedure .............................. .523
Wiring Diagram .................................................... .524
Diagnostic Procedure .......................................... .525
Component Inspection ......................................... .527
DTC P1568 ICC FUNCTION .................................. .529
On Board Diagnosis Logic ................................... .529
DTC Confirmation Procedure .............................. .529
Diagnostic Procedure .......................................... .529
DTC P1572 ICC BRAKE SWITCH ......................... .530
Component Description ....................................... .530
CONSULT-II Reference Value in Data Monitor Mode .530
On Board Diagnosis Logic ................................... .530
DTC Confirmation Procedure .............................. .531
Wiring Diagram .................................................... .532
Diagnostic Procedure .......................................... .533
Component Inspection ......................................... .538
DTC P1572 ASCD BRAKE SWITCH ..................... .539
Component Description ....................................... .539
CONSULT-II Reference Value in Data Monitor Mode .539
On Board Diagnosis Logic ................................... .539
DTC Confirmation Procedure .............................. .540
Wiring Diagram .................................................... .541
Diagnostic Procedure .......................................... .542
Component Inspection ......................................... .546
DTC P1574 ICC VEHICLE SPEED SENSOR ........ .547
Component Description ....................................... .547
On Board Diagnosis Logic ................................... .547
DTC Confirmation Procedure .............................. .547
Diagnostic Procedure .......................................... .548
DTC P1574 ASCD VEHICLE SPEED SENSOR .... .549
Component Description ....................................... .549
On Board Diagnosis Logic ................................... .549
DTC Confirmation Procedure .............................. .549
Diagnostic Procedure .......................................... .550
DTC P1715 INPUT SPEED SENSOR (TURBINE
REVOLUTION SENSOR) ....................................... .551
Description ........................................................... .551
CONSULT-II Reference Value in Data Monitor Mode .551 On Board Diagnosis Logic ...................................
.551
Diagnostic Procedure ........................................... .551
DTC P1805 BRAKE SWITCH ................................ .552
Description ........................................................... .552
CONSULT-II Reference Value in Data Monitor Mode .552
On Board Diagnosis Logic ................................... .552
DTC Confirmation Procedure ............................... .552
Wiring Diagram .................................................... .553
Diagnostic Procedure ........................................... .554
Component Inspection ......................................... .556
DTC P2100, P2103 THROTTLE CONTROL MOTOR
RELAY .................................................................... .557
Component Description ....................................... .557
CONSULT-II Reference Value in Data Monitor Mode .557
On Board Diagnosis Logic ................................... .557
DTC Confirmation Procedure ............................... .557
Wiring Diagram .................................................... .559
Diagnostic Procedure ........................................... .560
DTC P2101 ELECTRIC THROTTLE CONTROL
FUNCTION ............................................................. .563
Description ........................................................... .563
On Board Diagnosis Logic ................................... .563
DTC Confirmation Procedure ............................... .563
Wiring Diagram .................................................... .564
Diagnostic Procedure ........................................... .565
Component Inspection ......................................... .568
Removal and Installation ...................................... .568
DTC P2118 THROTTLE CONTROL MOTOR ........ .569
Component Description ....................................... .569
On Board Diagnosis Logic ................................... .569
DTC Confirmation Procedure ............................... .569
Wiring Diagram .................................................... .570
Diagnostic Procedure ........................................... .571
Component Inspection ......................................... .572
Removal and Installation ...................................... .573
DTC P2119 ELECTRIC THROTTLE CONTROL
ACTUATOR ............................................................ .574
Component Description ....................................... .574
On Board Diagnosis Logic ................................... .574
DTC Confirmation Procedure ............................... .574
Diagnostic Procedure ........................................... .575
DTC P2122, P2123 APP SENSOR ........................ .576
Component Description ....................................... .576
CONSULT-II Reference Value in Data Monitor Mode .576
On Board Diagnosis Logic ................................... .576
DTC Confirmation Procedure ............................... .577
Wiring Diagram .................................................... .578
Diagnostic Procedure ........................................... .579
Component Inspection ......................................... .582
Removal and Installation ...................................... .582
DTC P2127, P2128 APP SENSOR ........................ .583
Component Description ....................................... .583
CONSULT-II Reference Value in Data Monitor Mode .583
On Board Diagnosis Logic ................................... .583
DTC Confirmation Procedure ...............................
Page 1383 of 4366
EC-7
C
D E
F
G H
I
J
K L
M
EC A
Revision: 2006 July 2007 FX35/FX45
Wiring Diagram ...................................................
. 585
Diagnostic Procedure .......................................... . 586
Component Inspection ........................................ . 589
Removal and Installation ..................................... . 589
DTC P2135 TP SENSOR ....................................... . 590
Component Description ....................................... . 590
CONSULT-II Reference Value in Data Monitor Mode . 590
On Board Diagnosis Logic .................................. . 590
DTC Confirmation Procedure .............................. . 591
Wiring Diagram ................................................... . 592
Diagnostic Procedure .......................................... . 593
Component Inspection ........................................ . 596
Removal and Installation ..................................... . 596
DTC P2138 APP SENSOR .................................... . 597
Component Description ....................................... . 597
CONSULT-II Reference Value in Data Monitor Mode . 597
On Board Diagnosis Logic .................................. . 597
DTC Confirmation Procedure .............................. . 598
Wiring Diagram ................................................... . 599
Diagnostic Procedure .......................................... . 600
Component Inspection ........................................ . 604
Removal and Installation ..................................... . 604
DTC P2A00, P2A03 A/F SENSOR 1 ..................... . 605
Component Description ....................................... . 605
CONSULT-II Reference Value in Data Monitor Mode . 605
On Board Diagnosis Logic .................................. . 605
DTC Confirmation Procedure .............................. . 606
Wiring Diagram ................................................... . 607
Diagnostic Procedure .......................................... . 610
Removal and Installation ..................................... . 616
ASCD BRAKE SWITCH ........................................ . 617
Component Description ....................................... . 617
CONSULT-II Reference Value in Data Monitor Mode . 617
Wiring Diagram ................................................... . 618
Diagnostic Procedure .......................................... . 619
Component Inspection ........................................ . 623
ASCD INDICATOR ................................................ . 624
Component Description ....................................... . 624
CONSULT-II Reference Value in Data Monitor Mode . 624
Wiring Diagram ................................................... . 625
Diagnostic Procedure .......................................... . 626
ELECTRICAL LOAD SIGNAL ............................... . 627
Description .......................................................... . 627
CONSULT-II Reference Value in Data Monitor Mode . 627
Diagnostic Procedure .......................................... . 627
FUEL INJECTOR ................................................... . 629
Component Description ....................................... . 629
CONSULT-II Reference Value in Data Monitor Mode . 629
Wiring Diagram ................................................... . 630
Diagnostic Procedure .......................................... . 631
Component Inspection ........................................ . 635
Removal and Installation ..................................... . 635 FUEL PUMP ...........................................................
.636
Description ........................................................... .636
CONSULT-II Reference Value in Data Monitor Mode .636
Wiring Diagram .................................................... .637
Diagnostic Procedure .......................................... .638
Component Inspection ......................................... .641
Removal and Installation ..................................... .641
ICC BRAKE SWITCH ............................................ .642
Component Description ....................................... .642
CONSULT-II Reference Value in Data Monitor Mode .642
Wiring Diagram .................................................... .643
Diagnostic Procedure .......................................... .644
Component Inspection ......................................... .649
IGNITION SIGNAL ................................................. .650
Component Description ....................................... .650
Wiring Diagram .................................................... .651
Diagnostic Procedure .......................................... .656
Component Inspection ......................................... .661
Removal and Installation ..................................... .662
REFRIGERANT PRESSURE SENSOR ................. .663
Component Description ....................................... .663
Wiring Diagram .................................................... .664
Diagnostic Procedure .......................................... .665
Removal and Installation ..................................... .667
SNOW MODE SWITCH ......................................... .668
Description ........................................................... .668
CONSULT-II Reference Value in the Data Monitor
Mode .................................................................... .668
Wiring Diagram .................................................... .669
Diagnostic Procedure .......................................... .670
Component Inspection ......................................... .672
MIL AND DATA LINK CONNECTOR ..................... .673
Wiring Diagram .................................................... .673
SERVICE DATA AND SPECIFICATIONS (SDS) ... .675
Fuel Pressure ...................................................... .675
Idle Speed and Ignition Timing ............................ .675
Calculated Load Value ......................................... .675
Mass Air Flow Sensor .......................................... .675
Intake Air Temperature Sensor ............................ .675
Engine Coolant Temperature Sensor .................. .675
Air Fuel Ratio (A/F) Sensor 1 Heater ................... .675
Heated Oxygen sensor 2 Heater ......................... .675
Crankshaft Position Sensor (POS) ...................... .675
Camshaft Position Sensor (PHASE) ................... .675
Throttle Control Motor .......................................... .675
Fuel Injector ......................................................... .676
Fuel Pump ........................................................... .676
VK45DE
INDEX FOR DTC .................................................... .677
DTC No. Index ..................................................... .677
Alphabetical Index ............................................... .681
PRECAUTIONS ..................................................... .685
Precautions for Supplemental Restraint System
(SRS) “AIR BAG” and “SEAT BELT PRE-TEN-
SIONER” .............................................................. .685
Page 1388 of 4366
EC-12Revision: 2006 July 2007 FX35/FX45
On Board Diagnosis Logic ...................................
11 3 7
DTC Confirmation Procedure .............................. 11 3 7
Diagnostic Procedure .......................................... 11 3 8
DTC P0550 PSP SENSOR ..................................... 113 9
Component Description ....................................... 11 3 9
CONSULT-II Reference Value in Data Monitor Mode 11 3 9
On Board Diagnosis Logic ................................... 11 3 9
DTC Confirmation Procedure .............................. 11 3 9
Wiring Diagram .................................................... 11 4 0
Diagnostic Procedure .......................................... 11 4 1
Component Inspection ......................................... 11 4 3
Removal and Installation ..................................... 11 4 3
DTC P0603 ECM POWER SUPPLY ...................... 114 4
Component Description ....................................... 11 4 4
On Board Diagnosis Logic ................................... 11 4 4
DTC Confirmation Procedure .............................. 11 4 4
Wiring Diagram .................................................... 11 4 5
Diagnostic Procedure .......................................... 11 4 6
DTC P0605 ECM .................................................... 114 8
Component Description ....................................... 11 4 8
On Board Diagnosis Logic ................................... 11 4 8
DTC Confirmation Procedure .............................. 11 4 8
Diagnostic Procedure .......................................... 11 4 9
DTC P0643 SENSOR POWER SUPPLY ............... 115 1
On Board Diagnosis Logic ................................... 11 5 1
DTC Confirmation Procedure .............................. 11 5 1
Wiring Diagram .................................................... 11 5 2
Diagnostic Procedure .......................................... 11 5 4
DTC P0850 PNP SWITCH ..................................... 115 6
Component Description ....................................... 11 5 6
CONSULT-II Reference Value in Data Monitor Mode
11 5 6
On Board Diagnosis Logic ................................... 11 5 6
DTC Confirmation Procedure .............................. 11 5 6
Overall Function Check ....................................... 11 5 7
Wiring Diagram .................................................... 11 5 8
Diagnostic Procedure .......................................... 11 5 9
DTC P1140, P1145 IVT CONTROL POSITION SEN-
SOR ........................................................................ 116 1
Component Description ....................................... 11 6 1
CONSULT-II Reference Value in Data Monitor Mode 11 6 1
On Board Diagnosis Logic ................................... 11 6 1
DTC Confirmation Procedure .............................. 11 6 1
Wiring Diagram .................................................... 11 6 3
Diagnostic Procedure .......................................... 11 6 6
Component Inspection ......................................... 11 6 9
Removal and Installation ..................................... 11 6 9
DTC P1148, P1168 CLOSED LOOP CONTROL ... 117 0
On Board Diagnosis Logic ................................... 11 7 0
DTC P1211 TCS CONTROL UNIT ......................... 117 1
Description ........................................................... 11 7 1
On Board Diagnosis Logic ................................... 11 7 1
DTC Confirmation Procedure .............................. 11 7 1
Diagnostic Procedure .......................................... 11 7 1
DTC P1212 TCS COMMUNICATION LINE ........... 117 2
Description ........................................................... 11 7 2
On Board Diagnosis Logic ................................... 11 7 2 DTC Confirmation Procedure ...............................
11 7 2
Diagnostic Procedure ........................................... 11 7 2
DTC P1217 ENGINE OVER TEMPERATURE ....... 11 73
Description ........................................................... 11 7 3
CONSULT-II Reference Value in Data Monitor Mode 11 7 4
On Board Diagnosis Logic ................................... 11 7 4
Overall Function Check ........................................ 11 7 5
Wiring Diagram .................................................... 11 7 7
Diagnostic Procedure ........................................... 11 7 9
Main 13 Causes of Overheating .......................... 11 8 3
Component Inspection ......................................... 11 8 4
DTC P1225 TP SENSOR ....................................... 11 85
Component Description ....................................... 11 8 5
On Board Diagnosis Logic ................................... 11 8 5
DTC Confirmation Procedure ............................... 11 8 5
Diagnostic Procedure ........................................... 11 8 6
Removal and Installation ...................................... 11 8 6
DTC P1226 TP SENSOR ....................................... 11 87
Component Description ....................................... 11 8 7
On Board Diagnosis Logic ................................... 11 8 7
DTC Confirmation Procedure ............................... 11 8 7
Diagnostic Procedure ........................................... 11 8 8
Removal and Installation ...................................... 11 8 8
DTC P1421 COLD START CONTROL ................... 11 89
Description ........................................................... 11 8 9
On Board Diagnosis Logic ................................... 11 8 9
DTC Confirmation Procedure ............................... 11 8 9
Diagnostic Procedure ........................................... 11 8 9
DTC P1564 ICC STEERING SWITCH ................... 11 91
Component Description ....................................... 11 9 1
CONSULT-II Reference Value in Data Monitor Mode
11 9 1
On Board Diagnosis Logic ................................... 11 9 1
DTC Confirmation Procedure ............................... 11 9 2
Wiring Diagram .................................................... 11 9 3
Diagnostic Procedure ........................................... 11 9 4
Component Inspection ......................................... 11 9 7
DTC P1564 ASCD STEERING SWITCH ............... 11 98
Component Description ....................................... 11 9 8
CONSULT-II Reference Value in Data Monitor Mode 11 9 8
On Board Diagnosis Logic ................................... 11 9 8
DTC Confirmation Procedure ............................... 11 9 9
Wiring Diagram .................................................... 1200
Diagnostic Procedure ........................................... 1201
Component Inspection ......................................... 1204
DTC P1568 ICC FUNCTION .................................. 1205
On Board Diagnosis Logic ................................... 1205
DTC Confirmation Procedure ............................... 1205
Diagnostic Procedure ........................................... 1205
DTC P1572 ICC BRAKE SWITCH ......................... 1206
Component Description ....................................... 1206
CONSULT-II Reference Value in Data Monitor Mode 1206
On Board Diagnosis Logic ................................... 1206
DTC Confirmation Procedure ............................... 1207
Wiring Diagram .................................................... 1208
Page 1389 of 4366
EC-13
C
D E
F
G H
I
J
K L
M
EC A
Revision: 2006 July 2007 FX35/FX45
Diagnostic Procedure ..........................................
1209
Component Inspection ........................................ 1214
DTC P1572 ASCD BRAKE SWITCH .................... 1215
Component Description ....................................... 1215
CONSULT-II Reference Value in Data Monitor Mode 1215
On Board Diagnosis Logic .................................. 1215
DTC Confirmation Procedure .............................. 1216
Wiring Diagram ................................................... 1217
Diagnostic Procedure .......................................... 1218
Component Inspection ........................................ 1222
DTC P1574 ICC VEHICLE SPEED SENSOR ....... 1223
Component Description ....................................... 1223
On Board Diagnosis Logic .................................. 1223
DTC Confirmation Procedure .............................. 1223
Diagnostic Procedure .......................................... 1224
DTC P1574 ASCD VEHICLE SPEED SENSOR ... 1225
Component Description ....................................... 1225
On Board Diagnosis Logic .................................. 1225
DTC Confirmation Procedure .............................. 1225
Diagnostic Procedure .......................................... 1226
DTC P1715 INPUT SPEED SENSOR (TURBINE
REVOLUTION SENSOR) ...................................... 1227
Description .......................................................... 1227
CONSULT-II Reference Value in Data Monitor Mode 1227
On Board Diagnosis Logic .................................. 1227
Diagnostic Procedure .......................................... 1227
DTC P1800 VIAS CONTROL SOLENOID VALVE 1228 Component Description ....................................... 1228
CONSULT-II Reference Value in Data Monitor Mode 1228
On Board Diagnosis Logic .................................. 1228
DTC Confirmation Procedure .............................. 1228
Wiring Diagram ................................................... 1229
Diagnostic Procedure .......................................... 1230
Component Inspection ........................................ 1231
Removal and Installation ..................................... 1232
DTC P1805 BRAKE SWITCH ............................... 1233
Description .......................................................... 1233
CONSULT-II Reference Value in Data Monitor Mode 1233
On Board Diagnosis Logic .................................. 1233
DTC Confirmation Procedure .............................. 1233
Wiring Diagram ................................................... 1234
Diagnostic Procedure .......................................... 1235
Component Inspection ........................................ 1237
DTC P2100, P2103 THROTTLE CONTROL MOTOR
RELAY ................................................................... 1238
Component Description ....................................... 1238
CONSULT-II Reference Value in Data Monitor Mode 1238
On Board Diagnosis Logic .................................. 1238
DTC Confirmation Procedure .............................. 1238
Wiring Diagram ................................................... 1240
Diagnostic Procedure .......................................... 1241
DTC P2101 ELECTRIC THROTTLE CONTROL
FUNCTION ............................................................. 1244
Description .......................................................... 1244 On Board Diagnosis Logic ...................................
1244
DTC Confirmation Procedure .............................. 1244
Wiring Diagram .................................................... 1245
Diagnostic Procedure .......................................... 1246
Component Inspection ......................................... 1250
Removal and Installation ..................................... 1250
DTC P2118 THROTTLE CONTROL MOTOR ........ 1251
Component Description ....................................... 1251
On Board Diagnosis Logic ................................... 1251
DTC Confirmation Procedure .............................. 1251
Wiring Diagram .................................................... 1252
Diagnostic Procedure .......................................... 1253
Component Inspection ......................................... 1254
Removal and Installation ..................................... 1255
DTC P2119 ELECTRIC THROTTLE CONTROL
ACTUATOR ............................................................ 1256
Component Description ....................................... 1256
On Board Diagnosis Logic ................................... 1256
DTC Confirmation Procedure .............................. 1256
Diagnostic Procedure .......................................... 1257
DTC P2122, P2123 APP SENSOR ........................ 1258
Component Description ....................................... 1258
CONSULT-II Reference Value in Data Monitor Mode 1258
On Board Diagnosis Logic ................................... 1258
DTC Confirmation Procedure .............................. 1259
Wiring Diagram .................................................... 1260
Diagnostic Procedure .......................................... 1261
Component Inspection ......................................... 1263
Removal and Installation ..................................... 1264
DTC P2127, P2128 APP SENSOR ........................ 1265
Component Description ....................................... 1265
CONSULT-II Reference Value in Data Monitor Mode 1265
On Board Diagnosis Logic ................................... 1265
DTC Confirmation Procedure .............................. 1266
Wiring Diagram .................................................... 1267
Diagnostic Procedure .......................................... 1268
Component Inspection ......................................... 1271
Removal and Installation ..................................... 1271
DTC P2135 TP SENSOR ....................................... 1272
Component Description ....................................... 1272
CONSULT-II Reference Value in Data Monitor Mode 1272
On Board Diagnosis Logic ................................... 1272
DTC Confirmation Procedure .............................. 1273
Wiring Diagram .................................................... 1274
Diagnostic Procedure .......................................... 1275
Component Inspection ......................................... 1278
Removal and Installation ..................................... 1278
DTC P2138 APP SENSOR .................................... 1279
Component Description ....................................... 1279
CONSULT-II Reference Value in Data Monitor Mode 1279
On Board Diagnosis Logic ................................... 1279
DTC Confirmation Procedure .............................. 1280
Wiring Diagram .................................................... 1281
Diagnostic Procedure .......................................... 1282
Page 1390 of 4366
EC-14Revision: 2006 July 2007 FX35/FX45
Component Inspection .........................................
1286
Removal and Installation ..................................... 1286
DTC P2A00, P2A03 A/F SENSOR 1 ..................... 1287
Component Description ....................................... 1287
CONSULT-II Reference Value in Data Monitor Mode 1287
On Board Diagnosis Logic ................................... 1287
DTC Confirmation Procedure .............................. 1288
Wiring Diagram .................................................... 1289
Diagnostic Procedure .......................................... 1292
Removal and Installation ..................................... 1298
ASCD BRAKE SWITCH ......................................... 1299
Component Description ....................................... 1299
CONSULT-II Reference Value in Data Monitor Mode 1299
Wiring Diagram .................................................... 1300
Diagnostic Procedure .......................................... 1301
Component Inspection ......................................... 1305
ASCD INDICATOR ................................................. 1306
Component Description ....................................... 1306
CONSULT-II Reference Value in Data Monitor Mode 1306
Wiring Diagram .................................................... 1307
Diagnostic Procedure .......................................... 1308
ELECTRICAL LOAD SIGNAL ............................... 1309
Description ........................................................... 1309
CONSULT-II Reference Value in Data Monitor Mode 1309
Diagnostic Procedure .......................................... 1309
FUEL INJECTOR ................................................... 1311
Component Description ....................................... 1311
CONSULT-II Reference Value in Data Monitor Mode
1311
Wiring Diagram .................................................... 1312
Diagnostic Procedure .......................................... 1313
Component Inspection ......................................... 1317
Removal and Installation ..................................... 1317
FUEL PUMP ........................................................... 1318
Description ........................................................... 1318
CONSULT-II Reference Value in Data Monitor Mode 1318
Wiring Diagram .................................................... 1319
Diagnostic Procedure .......................................... 1320
Component Inspection ......................................... 1323
Removal and Installation ..................................... 1323
ICC BRAKE SWITCH ............................................. 1324
Component Description ....................................... 1324
CONSULT-II Reference Value in Data Monitor Mode 1324
Wiring Diagram .................................................... 1325
Diagnostic Procedure ........................................... 1326
Component Inspection ......................................... 1331
IGNITION SIGNAL ................................................. 1332
Component Description ....................................... 1332
Wiring Diagram .................................................... 1333
Diagnostic Procedure ........................................... 1338
Component Inspection ......................................... 1343
Removal and Installation ...................................... 1344
REFRIGERANT PRESSURE SENSOR ................. 1345
Component Description ....................................... 1345
Wiring Diagram .................................................... 1346
Diagnostic Procedure ........................................... 1347
Removal and Installation ...................................... 1349
SNOW MODE SWITCH .......................................... 1350
Description ........................................................... 1350
CONSULT-II Reference Value in the Data Monitor
Mode .................................................................... 1350
Wiring Diagram .................................................... 1351
Diagnostic Procedure ........................................... 1352
Component Inspection ......................................... 1354
VARIABLE INDUCTION AIR CONTROL SYSTEM
(VIAS) ..................................................................... 1355
Description ........................................................... 1355
CONSULT-II Reference Value in Data Monitor Mode 1356
Wiring Diagram .................................................... 1357
Diagnostic Procedure ........................................... 1359
Component Inspection ......................................... 1362
Removal and Installation ...................................... 1363
MIL AND DATA LINK CONNECTOR ..................... 1364
Wiring Diagram .................................................... 1364
SERVICE DATA AND SPECIFICATIONS (SDS) ... 1366
Fuel Pressure ....................................................... 1366
Idle Speed and Ignition Timing ............................. 1366
Calculated Load Value ......................................... 1366
Mass Air Flow Sensor .......................................... 1366
Intake Air Temperature Sensor ............................ 1366
Engine Coolant Temperature Sensor ................... 1366
Fuel Tank Temperature Sensor ............................ 1366
Crankshaft Position Sensor (POS) ...................... 1366
Camshaft Position Sensor (PHASE) .................... 1366
A/F Sensor 1 Heater ............................................ 1366
Heated Oxygen sensor 2 Heater ......................... 1367
Throttle Control Motor .......................................... 1367
Fuel Injector ......................................................... 1367
Fuel Pump ............................................................ 1367
Page 1393 of 4366
![INFINITI FX35 2007 Service Manual INDEX FOR DTC EC-17
[VQ35DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2006 July 2007 FX35/FX45P0456 0456 EVAP VERY SML LEAK EC-449
P0460 0460 FUEL LEV SEN SLOSHEC-459
P0461 0461 FUEL LEVEL SE](/img/42/57018/w960_57018-1392.png "INFINITI FX35 2007 Service Manual INDEX FOR DTC EC-17
[VQ35DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2006 July 2007 FX35/FX45P0456 0456 EVAP VERY SML LEAK EC-449
P0460 0460 FUEL LEV SEN SLOSHEC-459
P0461 0461 FUEL LEVEL SE")
INDEX FOR DTC EC-17
[VQ35DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2006 July 2007 FX35/FX45P0456 0456 EVAP VERY SML LEAK EC-449
P0460 0460 FUEL LEV SEN SLOSHEC-459
P0461 0461 FUEL LEVEL SENSOREC-461
P0462 0462 FUEL LEVL SEN/CIRCEC-463
P0463 0463 FUEL LEVL SEN/CIRCEC-463
P0500 0500
VEH SPEED SEN/CIRC*5EC-465
P0506 0506 ISC SYSTEM EC-467
P0507 0507 ISC SYSTEMEC-469
P0550 0550 PW ST P SEN/CIRCEC-471
P0603 0603 ECM BACK UP/CIRCUITEC-476
P0605 0605 ECMEC-480
P0643 0643 SENSOR POWER/CIRCEC-483
P0700 0700 TCM AT- 111
P0705 0705 PNP SW/CIRCAT- 11 2
P0710 0710 ATF TEMP SEN/CIRCAT- 1 3 4
P0717 0717 TURBINE SENSOR AT- 11 6
P0720 0720
VEH SPD SEN/CIR AT*5AT- 11 8
P0740 0740 TCC SOLENOID/CIRC AT- 1 2 5
P0744 0744 A/T TCC S/V FNCTNAT- 1 2 7
P0745 0745 L/PRESS SOL/CIRCAT- 1 2 9
P0850 0850 P-N POS SW/CIRCUITEC-488
P1148 1148 CLOSED LOOP-B1EC-493
P1168 1168 CLOSED LOOP-B2EC-493
P1211 1211 TCS C/U FUNCTNEC-494
P1212 1212 TCS/CIRC EC-495
P1217 1217 ENG OVER TEMPEC-496
P1225 1225 CTP LEARNINGEC-509
P1226 1226 CTP LEARNING EC-511
P1421 1421 COLD START CONTROLEC-513
P1564 1564 ASCD SW EC-515 (Models with ICC),
EC-522
(Models with ASCD)
P1568 1568 ICC COMMAND VALUE*
6EC-529
P1572 1572 ASCD BRAKE SW EC-530 (Models with ICC),
EC-539
(Models with ASCD)
P1574 1574 ASCD VHL SPD SEN EC-547
(Models with ICC),
EC-549
(Models with ASCD)
P1610 - P1615 1610 - 1615 NATS MALFUNCTION EC-551
P1715 1715 IN PULY SPEEDEC-551
P1730 1730 A/T INTERLOCK AT- 1 4 1
P1752 1752 I/C SOLENOID/CIRCAT- 1 4 6
P1754 1754 I/C SOLENOID FNCTNAT- 1 4 8
P1757 1757 FR/B SOLENOID/CIRCAT- 1 5 0
P1759 1759 FR/B SOLENOID FNCTAT- 1 5 2
DTC*1
Items
(CONSULT-II screen terms) Reference page
CONSULT-II
GST*
2ECM*3
Page 1394 of 4366
![INFINITI FX35 2007 Service Manual EC-18
[VQ35DE]
INDEX FOR DTC
Revision: 2006 July 2007 FX35/FX45
*1: 1st trip DTC No. is the same as DTC No.
*2: This number is prescribed by SAE J2012.
*3: In Diagnostic Test Mode II (Self-diagnostic](/img/42/57018/w960_57018-1393.png "INFINITI FX35 2007 Service Manual EC-18
[VQ35DE]
INDEX FOR DTC
Revision: 2006 July 2007 FX35/FX45
*1: 1st trip DTC No. is the same as DTC No.
*2: This number is prescribed by SAE J2012.
*3: In Diagnostic Test Mode II (Self-diagnostic")
EC-18
[VQ35DE]
INDEX FOR DTC
Revision: 2006 July 2007 FX35/FX45
*1: 1st trip DTC No. is the same as DTC No.
*2: This number is prescribed by SAE J2012.
*3: In Diagnostic Test Mode II (Self-diagnostic results), this number is controlled by NISSAN.
*4: The troubleshooting for this DTC needs CONSULT-II.
*5: When the fail-safe operations for both self-diagnoses occur, the MIL illuminates.
*6: For models with ICC system. P1762 1762 D/C SOLENOID/CIRC
AT-154
P1764 1764 D/C SOLENOID FNCTNAT-156
P1767 1767 HLR/C SOL/CIRCAT-158
P1769 1769 HLR/C SOL FNCTNAT-160
P1772 1772 LC/B SOLENOID/CIRCAT-162
P1774 1774 LC/B SOLENOID FNCTAT-164
P1805 1805 BRAKE SW/CIRCUITEC-552
P2100 2100 ETC MOT PWREC-557
P2101 2101 ETC FUNCTION/CIRCEC-563
P2103 2103 ETC MOT PWREC-557
P 2 11 8 2 11 8 E T C M O TEC-569
P 2 11 9 2 11 9 E T C A C T REC-574
P2122 2122 APP SEN 1/CIRC EC-576
P2123 2123 APP SEN 1/CIRCEC-576
P2127 2127 APP SEN 2/CIRCEC-583
P2128 2128 APP SEN 2/CIRCEC-583
P2135 2135 TP SENSOREC-590
P2138 2138 APP SENSOREC-597
P2A00 2A00 A/F SENSOR1 (B1) EC-605
P2A03 2A03 A/F SENSOR1 (B2)EC-605
DTC*1
Items
(CONSULT-II screen terms) Reference page
CONSULT-II
GST*
2ECM*3
Page 1395 of 4366
![INFINITI FX35 2007 Service Manual INDEX FOR DTC EC-19
[VQ35DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2006 July 2007 FX35/FX45
Alphabetical IndexNBS003KV
NOTE:
If DTC U1000 or U1001 is displayed with other DTC, first perfo](/img/42/57018/w960_57018-1394.png "INFINITI FX35 2007 Service Manual INDEX FOR DTC EC-19
[VQ35DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2006 July 2007 FX35/FX45
Alphabetical IndexNBS003KV
NOTE:
If DTC U1000 or U1001 is displayed with other DTC, first perfo")
INDEX FOR DTC EC-19
[VQ35DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2006 July 2007 FX35/FX45
Alphabetical IndexNBS003KV
NOTE:
If DTC U1000 or U1001 is displayed with other DTC, first perform the trouble diagnosis for DTC
U1000, U1001. Refer to EC-155, "
DTC U1000, U1001 CAN COMMUNICATION LINE" .
If DTC U1010 is displayed with other DTC, first perform the trouble diagnosis for DTC U1010.
Refer to EC-158, "
DTC U1010 CAN COMMUNICATION" .
Items
(CONSULT-II screen terms) DTC*
1
Reference page
CONSULT-II
GST*
2ECM*3
A/F SEN1 HTR (B1) P0031 0031 EC-164
A/F SEN1 HTR (B1) P0032 0032EC-164
A/F SEN1 HTR (B2) P0051 0051EC-164
A/F SEN1 HTR (B2) P0052 0052EC-164
A/F SENSOR1 (B1) P0130 0130EC-229
A/F SENSOR1 (B1) P0131 0131EC-239
A/F SENSOR1 (B1) P0132 0132EC-248
A/F SENSOR1 (B1) P0133 0133EC-257
A/F SENSOR1 (B1) P2A00 2A00EC-605
A/F SENSOR1 (B2) P0150 0150EC-229
A/F SENSOR1 (B2) P0151 0151EC-239
A/F SENSOR1 (B2) P0152 0152EC-248
A/F SENSOR1 (B2) P0153 0153EC-257
A/F SENSOR1 (B2) P2A03 2A03EC-605
A/T INTERLOCK P1730 1730 AT- 1 4 1
A/T TCC S/V FNCTN P0744 0744AT- 1 2 7
APP SEN 1/CIRC P2122 2122EC-576
APP SEN 1/CIRC P2123 2123EC-576
APP SEN 2/CIRC P2127 2127EC-583
APP SEN 2/CIRC P2128 2128EC-583
APP SENSOR P2138 2138EC-597
ASCD BRAKE SW P1572 1572 EC-530 (Models with ICC),
EC-539
(Models with ASCD)
ASCD SW P1564 1564 EC-515
(Models with ICC),
EC-522
(Models with ASCD)
ASCD VHL SPD SEN P1574 1574 EC-547
(Models with ICC),
EC-549
(Models with ASCD)
ATF TEMP SEN/CIRC P0710 0710 AT- 1 3 4
BRAKE SW/CIRCUIT P1805 1805EC-552
CAN COMM CIRCUIT U1000
1000*4EC-155
CAN COMM CIRCUIT U10011001*4EC-155
CKP SEN/CIRCUIT P0335 0335 EC-360
CLOSED LOOP-B1 P1148 1148EC-493
CLOSED LOOP-B2 P1168 1168EC-493
CMP SEN/CIRC-B1 P0340 0340EC-367
CMP SEN/CIRC-B2 P0345 0345EC-367
COLD START CONTROL P1421 1421EC-513
CONTROL UNIT(CAN) U1010 1010EC-158
Page 1411 of 4366
![INFINITI FX35 2007 Service Manual AUTOMATIC SPEED CONTROL DEVICE (ASCD) EC-35
[VQ35DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2006 July 2007 FX35/FX45
AUTOMATIC SPEED CONTROL DEVICE (ASCD)PFP:18930
System DescriptionNBS003L](/img/42/57018/w960_57018-1410.png "INFINITI FX35 2007 Service Manual AUTOMATIC SPEED CONTROL DEVICE (ASCD) EC-35
[VQ35DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2006 July 2007 FX35/FX45
AUTOMATIC SPEED CONTROL DEVICE (ASCD)PFP:18930
System DescriptionNBS003L")
AUTOMATIC SPEED CONTROL DEVICE (ASCD) EC-35
[VQ35DE]
C
D E
F
G H
I
J
K L
M A
EC
Revision: 2006 July 2007 FX35/FX45
AUTOMATIC SPEED CONTROL DEVICE (ASCD)PFP:18930
System DescriptionNBS003L7
INPUT/OUTPUT SIGNAL CHART
*: This signal is sent to the ECM through CAN communication line.
BASIC ASCD SYSTEM
Refer to Owner's Manual for ASCD operating instructions.
Automatic Speed Control Device (ASCD) allows a driver to keep vehicle at predetermined constant speed
without depressing accelerator pedal. Driver can set vehicle speed in advance between approximately 40 km/
h (25 MPH) and 144 km/h (89 MPH).
ECM controls throttle angle of electric throttle control actuator to regulate engine speed.
Operation status of ASCD is indicated by CRUISE indicator and SET indicator in combination meter. If any
malfunction occurs in ASCD system, it automatically deactivates control.
NOTE:
Always drive vehicle in safe manner according to traffic conditions and obey all traffic laws.
SET OPERATION
Press MAIN switch. (The CRUISE indicator in combination meter illuminates.)
When vehicle speed reaches a desired speed between approximately 40 km/h (25 MPH) and 144 km/h (89
MPH), press SET/COAST switch. (Then SET indicator in combination meter illuminates.)
ACCELERATOR OPERATION
If the RESUME/ACCELERATE switch is pressed during cruise control driving, increase the vehicle speed until
the switch is released or vehicle speed reaches maximum speed controlled by the system.
And then ASCD will keep the new set speed.
CANCEL OPERATION
When any of following conditions exist, cruise operation will be canceled.
CANCEL switch is pressed
More than 2 switches at ASCD steering switch are pressed at the same time (Set speed will be cleared)
Brake pedal is depressed
Selector lever is changed to N, P, R position
Vehicle speed decreased to 13 km/h (8 MPH) lower than the set speed
VDC/TCS system is operated
When the ECM detects any of the following conditions, the ECM will cancel the cruise operation and inform
the driver by blinking indicator lamp.
Engine coolant temperature is slightly higher than the normal operating temperature, CRUISE lamp may
blink slowly.
When the engine coolant temperature decreases to the normal operating temperature, CRUISE lamp will
stop blinking and the cruise operation will be able to work by depressing SET/COAST switch or RESUME/
ACCELERATE switch.
Malfunction for some self-diagnoses regarding ASCD control: SET lamp will blink quickly.
If MAIN switch is turned to OFF during ASCD is activated, all of ASCD operations will be canceled and vehicle
speed memory will be erased.
COAST OPERATION
When the SET/COAST switch is pressed during cruise control driving, decrease vehicle set speed until the
switch is released. And then ASCD will keep the new set speed.
Sensor Input signal to ECM ECM function Actuator
ASCD brake switch Brake pedal operation
ASCD vehicle speed control Electric throttle control
actuator
Stop lamp switch Brake pedal operation
ASCD steering switch ASCD steering switch operation
Park/neutral position (PNP) switch Gear position
Wheel sensor. Vehicle speed*
TCM Powertrain revolution*