ECO mode INFINITI M 2013 Navigation Manual

Black plate (95,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
.If a destination was added, the prior
destination becomes a waypoint.
MOVING LOCATION OF DESTINATION
The location of the destination can be
adjusted by moving the cross pointer
across the map.
IRG00941.Highlight [Move Location] and push
.
INFO:
The screen for adjusting the location also
changes by touching the map screen dis-
played on the right side of the screen.
IRG00952. Adjust the location by moving the cross
pointer across the map and push
. The location of the destination
is modified.
INFO:
.
The map scale can be changed by turning
the center dial or touching the scale icon.
The map scale can also be changed by
pressing / (if so
equipped).
.The same screen as when [Move Location] is
touched can be displayed with the following
operations:
—Touching the map screen.
—Pushing the directional buttons except
up/down buttons (INFINITI controller
with directional buttons).
—Pushing the slide switch except upward/
downward (INFINITI controller without
directional buttons).
STORING LOCATION
A searched location can be stored in the
Address Book. Then it can be easily
retrieved and set as a destination (or
waypoint).
IRG00961. Highlight [Store Location] and push
.
IRG0097
5. Route guidance
5-5
Condition: Language=NAM_English/

Black plate (100,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-10
Split screen settings
The display setting on the left-hand side
screen shown during route guidance can
be changed.
IRG01041. Pushwhile the current location
map screen is displayed.
2. Highlight [Map View] and push
.
IRG01053.Highlight [View Settings] and push
. 4.
Highlight the preferred screen and
push . The indicator of the
selected screen illuminates.
Intersection:
IRG0101The map screen and the enlarged intersec-
tion view can be displayed at the same
time.
Push

Black plate (101,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
display the fuel economy information,
push

Black plate (108,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-18
INFO:
.
If the destination is deleted, the final
waypoint of the route becomes the destina-
tion.
.Even if the map screen is touched, the same
map screen as when [Move Dest.] is
selected is displayed.
Changing order of destination and
waypoints
The order of a destination and waypoints
that have already been set can be changed.
IRG01321. Push .
2. Highlight [Edit/Add to Route] and push .
3. Highlight a destination or waypoint that is already set and push .
IRG01334.Highlight [Change Order] and push
. A list of the destination and
waypoints is displayed.
IRG01345.Highlight a preferred destination or
waypoint to replace the previously
selected destination or waypoint and
push .
IRG01356. A message is displayed and the order
of the destination or waypoint is
changed.
IRG01367. By highlighting [Calculate] and pushing, the system will recalculate the
routes. After the route search is com-
plete, the display will automatically
return to the current location map
screen.
Condition: Language=NAM_English/

Black plate (133,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
Voicetag (only for stored locations)
Stores the voicetag for the stored location.
The voicetag allows you to set the stored
location as a destination using Voice
Recognition.
IST01141. Highlight [Voicetag] and push.
IST01152. Highlight [Store] and push.
IST01163. A beep sounds, and the system enters
the voice command reception mode.
4. Speak the name/word to be used as Voicetag.
5. The Voicetag is stored, provided the system recognizes it.
INFO:
.
A Voicetag cannot be stored, overwritten or
played while driving.
.The Address Book can store up to 100
Voicetags.
.Highlight [Play] to confirm the stored
Voicetag.
.Highlight [Delete] to delete a stored Voice-
tag.
.If a Voicetag is already stored, select
[Restore] to re-record the Voicetag.
Icon
Changes the icon of the home or stored
address to the preferred one. By changing
the icons, the usage of the [By Icon] option
of the sort function can be optimized more
effectively.
IST01171. Highlight [Icon] and push .
A list of icons is displayed.
IST01182. Highlight the preferred icon and push .
The icon is changed.
6. Storing location/route
6-11
Condition: Language=NAM_English/

Black plate (145,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Highlight [Download Address Book toUSB] or [Download Address Book from
USB] and push .
IST01646.Highlight a stored item. The [ON]
indicator illuminates.
IST01657.Highlight [Download] and push
.
NOTE:
Do not remove the USB memory until the
system completely imports or exports the data.
IST0166
INFO:
If the USB memory already has the data for a
stored address, a confirmation message is
displayed. Once overwritten, the original data
cannot be recovered.
6. Storing location/route
6-23
Condition: Language=NAM_English/

Black plate (148,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
7. Viewing technical information
7-2
INFORMATION SCREEN
This screen sets or displays various
information that is helpful for using the
vehicle safely and comfortably.
Available items include the vehicle infor-
mation, Infiniti Connection
TM(if so
equipped), Traffic Info. setup, current loca-
tion information, GPS information, Voice
recognition list and map version.
INFO:
.
A NavTraffic subscription is necessary to
view Traffic Info.
.[Infiniti Connection] is a feature of Infiniti
Connection. Use of this feature is dependent
upon a valid subscription and the telematics
device being in operative condition, as well
as cellular connectivity, navigation map
data and GPS satellite signal reception
being available.
JNG0147MBASIC OPERATION
1. Push .
2. Highlight the preferred item and push .
Available items . [Infiniti Connection] (if so equipped):
Displays various types of information or
receives services by connecting your
vehicle to the Infiniti Connection Data
Center.
“Infiniti ConnectionTM”(page 7-3)
. [Energy Flow] (if so equipped):
Refer to the vehicle Owner’s Manual.
. [Fuel Economy]:
Refer to the vehicle Owner’s Manual.
. [Tire Pressure] (if so equipped):
Refer to the vehicle Owner’s Manual. .
[Maintenance]:
Refer to the vehicle Owner’s Manual.
. [Traffic Info]:
Allows Traffic Info. setup.
“Viewing available traffic informa-
tion” (page 7-16)
. [Weather Info]:
Displays weather information.
“Viewing available weather infor-
mation” (page 7-21)
. [Trip Computer] (if so equipped):
Refer to the vehicle Owner’s Manual.
. [Others]:
—
[Where am I?]:
Displays information regarding the cur-
rent vehicle location.
“Viewing information about current
vehicle location” (page 7-15)
—[Map Update]:
Displays the map version and enables
updating of the map data.
“Map update” (page 7-30)
—[Navigation Version]:
Displays the current navigation system
version.
“Viewing navigation system ver-
sion information” (page 7-31)
Condition: Language=NAM_English/

Black plate (149,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
—[GPS Position]:Displays GPS information regarding the
current vehicle location.
“Viewing GPS current location in-
formation” (page 7-32)
—[Voice Recognition]:
Displays information on how to use the
voice recognition.
“9. Voice recognition”
INFO:
The displayed items vary depending on the
options that are equipped on the vehicle.
INFINITI CONNECTIONTM(if so equipped)
LEGAL DISCLAIMER
Avoid operating Infiniti ConnectionTMand
Infiniti Connection Plus services in such a
way that you are distracted while driving.
Infiniti Connection Subscription Agreement
required to enroll.
Beginning on your date of purchase, for a
period of time, services are complimentary.
At the expiration of the complimentary
period, your credit card (if on file) will be
charged and your service will automatically
renew in accordance with the terms of your
Infiniti Connection Subscription Agree-
ment.
Services are dependent upon subscription
enrollment and the telematics device being
in operative condition, cellular connection
availability, navigation map data, and GPS
satellite signal reception, which can limit
the ability to reach Infiniti Connection or to
receive support. Requires compatible
GSM/GPRS cellular network. Should the
cellular provider terminate or restrict net-
work service, services will not be available.
Under this circumstance, your service may
be suspended or terminated without notice and without liability to Nissan, Nissan’s
third party service providers, the under-
lying wireless carrier or any third party
beneficiary. In the event a change of
telecommunications systems or services
becomes necessary, you are solely respon-
sible for replacing, as well as the cost of
replacing, any equipment in the vehicle
that is necessitated. Terms and conditions
of Infiniti Connection Subscription Agree-
ment apply.
INFINITI CONNECTION FEATURES
Infiniti Connection provides various types
of information and services by connecting
your vehicle to the Infiniti Connection Data
Center and Infiniti Connection Response
Center using TCU (Telematics Communica-
tion Unit) installed in your vehicle.
WARNING!GUID-3351361F-A754-4DC9-B209-4D2EF539E24B.
Radio waves could adversely affect elec-
tric medical equipment. Those who use a
pacemaker should contact the electric
medical equipment manufacturer regard-
ing the possible influences before use.
. The TCU antenna is installed inside the
upper central part of the instrument
panel. An occupant should not get any
7. Viewing technical information
7-3
Condition: Language=NAM_English/

Black plate (151,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
.Enhanced Roadside Assistance:
Enhanced Roadside Assistance allows
you to receive assistance from the
Roadside Response Specialist for a
non‐emergency incident that requires
a towing or third party response
service. The service is accessed by
touching the IVR (Interactive Voice
Response) soft button on the naviga-
tion screen or by pushing the in-vehicle
button. Roadside Assistance
may also be used in conjunction with
the Emergency Assistance service, if
warranted.
“Emergency support” (page 7-14)
. My Schedule:
My Schedule feature allows accessing
to your personal online Google Calen-
dar
TMvia the navigation system and
displaying the calendar or read out the
schedule. This service will also allow
you to review your appointments and
meetings, and select the meeting loca-
tion as a destination.
“Viewing information feeds”
(page 7-9)
. Report Stolen Vehicle:
Report Stolen Vehicle feature allows reporting Response Specialists of loca-
tion information send from a stolen
vehicle and the Response Specialists
provide that information to local law
enforcement agencies to assist in the
recovery of a stolen vehicle by autho-
rities.
. Remote Door Lock/Unlock:
Remote Door Lock/Unlock feature al-
lows you to access the vehicle remotely
by calling to an Infiniti Connection
Response Specialist or from the Infiniti
Connection website to send lock or
unlock commands to the vehicle.
“Connecting to Interactive Voice
Menu” (page 7-10)
. Alarm Notification:
Alarm Notification feature will notify
you via the chosen notification method
in the Infiniti Connection website when
your vehicle alarm system is activated.
. Scheduled Maintenance Notification:
The Maintenance Alert Notification pro-
vides vehicle’s mileage data to INFINITI.
INFINIT notifies you the maintenance
notifications using this mileage data. .
Maintenance Alert:
Maintenance Alert allows you to receive
notifications via the chosen notification
method set in the Infiniti Connection
website in the case of a vehicle
subsystem malfunction. The service is
managed through the Infiniti Connec-
tion website.
. Destination Assistance:
Destination Assistance helps you to
search a destination via the Interactive
Voice Response (IVR) system or a live
Response Specialist by pushing the IVR
soft button on the navigation screen.
The IVR system will ask you for name,
item or address, etc. to locate your
requested point of interest and ac-
cesses a third-party service to bring
up the most applicable results. A
Response Specialist will ask you if your
request is not recognized in the IVR
session.
. Destination Send‐to Vehicle:
Destination Send-to-Vehicle feature al-
lows you to find the point of interest
information from the latest database
within the Infiniti Connection website
and download to the vehicle.
7. Viewing technical information
7-5
Condition: Language=NAM_English/

Black plate (154,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
7. Viewing technical information
7-8
.Depending on the line used, the sound
volume may decrease. Adjust the vo-
lume as necessary.
. Received sounds may be distorted or
ambient noise may sound like voices of
a crowd. This is due to the use of the
digital line and is not a malfunction.
. You may hear your own voice from the
speaker when talking with the Infiniti
Connection Response Specialists due
to a network disturbance. When this
occurs, reconnect the line after a few
minutes or at a different location.
. This vehicle incorporates a communica-
tion device that is called a TCU (Tele-
matics Communication Unit). The
communication connection between
this unit and the Infiniti Connection
Data Center allows for various services.
When the system connects to the
Infiniti Connection Data Center, an
antenna icon will appear on the screen.
Use the service in a location where the
symbol representing good signal recep-
tion appears on the screen.
: When the signal reception is
good
: When the signal reception is bad .
The Infiniti Connection service uses the
TCU (Telematics Communication Unit).
Even if the signal strength bar of the in-
vehicle data communication module
indicates good reception, connection
to the Infiniti Connection Data Center
may be disabled. This does not indicate
a malfunction. Operate the system
again after a few minutes.
BASIC OPERATION
With the Infiniti Connection service, various
information can be received and displayed
on the screen. The information can also be
announced by the system.
1. Push .
JNG0147M2. Highlight [Infiniti Connection] and push
.
JNG0149M3. Highlight the preferred item and push.
Available items . [All Information Feeds]:
Displays a list of available information
feeds.
“Viewing information feeds”
(page 7-9)
. [Connect to Voice Menu]:
Connects to the Infiniti Connection
Interactive Voice Menu.
“Connecting to Interactive Voice
Menu” (page 7-10)
. [History]:
Displays a list of Infiniti Connection
information that has been used.
“Viewing information feeds his-
tory” (page 7-11)
Condition: Language=NAM_English/