low beam INFINITI M 2013 Quick Reference Guide

first drive features
10
Starting/Stopping the Engine
depress the brake pedal.

press the ignition switch S tAR t/S tOP button to
start the engine.
nOte: It is important to make sure the InFInItI Intelligent
key
™ is with you (that is, in your pocket or purse).
TURNING THE ENGINE OFF

Move the shift lever to the P (PARk) position and
apply the parking brake.

press the ignition switch S tAR t/S tOP button to turn the engine off.
eMeRGency enGIne Shut OFF
t o shut off the engine in an emergency situation while driving, perform one of the following procedures:

Rapidly push the push button ignition switch 3 consecutive times, or

push and hold the push button ignition switch for more than 2 seconds.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch
heAdLIGht c OntROL

turn the headlight control switch to the
position

01 to turn on the front parking, side marker, tail, license
plate and instrument panel lights. turn the switch to
the

position
02 to turn on the headlights.
A ut OLIGht S yS teM

the autolight system will automatically turn the headlights on when it is dark and off when it is
light. the system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.

to activate the autolight system, turn the headlight control switch to the AU tO position
03
then push the ignition switch to ON.
to deactivate the autolight system, turn the headlight
control switch to the OFF,

01 or
position
02 .

hIGh BeAM S eLect

push the headlight control switch forward
04 to
select the high beam function. the blue indicator light

illuminates in the instrument panel. p ull the
headlight switch back to the original position to
select the low beam. the blue indicator light goes off.

pull and release the headlight control switch
05 to
flash the headlight high beams on and off.
03
01
02
04
05

11
FOG LIGht S
wItch
nO te: the headlights must be on and the low beams

selected for the fog lights to operate.

turn the switch (inside collar) to the
position
06
to turn the fog lights on.

turn the switch (inside collar)
to the OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
06
Windshield Wiper/Washer Switch

Move the lever to the following positions to operate
the windshield wipers:

01 Mist (MISt) - One sweep operation of the wipers.

02 Auto (A U tO ) - Operates the rain-sensing wipers
intermittently. the intermittent speed can be
adjusted by twisting the time control ring

03 .

04 Low (LO) - wipers operate at a continuous
low-speed.

05 high (hI) - wipers operate at a continuous
high-speed.

06 p ull the lever toward you to activate the washer.
the wipers will operate several times.
RAIn-S enSInG A utO wIpeR S yS teM

the rain-sensing auto wiper system can automatically turn on the wipers and adjust the wiper
speed depending on the rainfall and the vehicle speed.

to set the rain-sensing auto wiper system, push the lever down to the AU tO position
02 . the

wiper will sweep once while the ignition switch is in the ON position.

the rain sensor sensitivity level can be adjusted by turning the time control ring
03 toward the

front (high sensitivity) or toward the rear (low sensitivity).
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
MISt
OFF
AU tO
LO
hI
02
04
05
01
03
06