parking brake INFINITI M 2013 Quick Reference Guide

first drive features
10
Starting/Stopping the Engine
depress the brake pedal.

press the ignition switch S tAR t/S tOP button to
start the engine.
nOte: It is important to make sure the InFInItI Intelligent
key
™ is with you (that is, in your pocket or purse).
TURNING THE ENGINE OFF

Move the shift lever to the P (PARk) position and
apply the parking brake.

press the ignition switch S tAR t/S tOP button to turn the engine off.
eMeRGency enGIne Shut OFF
t o shut off the engine in an emergency situation while driving, perform one of the following procedures:

Rapidly push the push button ignition switch 3 consecutive times, or

push and hold the push button ignition switch for more than 2 seconds.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Headlight Control Switch
heAdLIGht c OntROL

turn the headlight control switch to the
position

01 to turn on the front parking, side marker, tail, license
plate and instrument panel lights. turn the switch to
the

position
02 to turn on the headlights.
A ut OLIGht S yS teM

the autolight system will automatically turn the headlights on when it is dark and off when it is
light. the system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.

to activate the autolight system, turn the headlight control switch to the AU tO position
03
then push the ignition switch to ON.
to deactivate the autolight system, turn the headlight
control switch to the OFF,

01 or
position
02 .

hIGh BeAM S eLect

push the headlight control switch forward
04 to
select the high beam function. the blue indicator light

illuminates in the instrument panel. p ull the
headlight switch back to the original position to
select the low beam. the blue indicator light goes off.

pull and release the headlight control switch
05 to
flash the headlight high beams on and off.
03
01
02
04
05

23
07 MAP – press to display the map.
while following a programmed route, press multiple times to
change the type of route information.
08 S
tAt US – press multiple times to display audio information, the air conditioner status, fuel
economy or navigation directions.
09 – press to switch between the day screen (bright) and the night screen (dark). press and
hold the button to turn the display off. press again to turn the display on.
10 BAC k – press to return to the previous screen. In a settings screen, this button can also be
used to apply the setting. In a character input screen, this button can also delete the characters
that have been entered.
11 VOICE – press to hear the current voice guidance for a programmed route.

For more information, please refer to your navigation System Owner’s Manual.
DVD Player (if so equipped)

this system allows you to play video files via a dvd
or cd from the front display.

to view movies on the front display, stop the vehicle
in a safe location, move the shift lever to the P (PARk)
position and apply the parking brake.

to reduce driver distraction, movies will not be shown
on the front display while the vehicle is in any drive
position.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.