check oil INFINITI M35 2007 Factory Workshop Manual

INFINITI M35 2007 Factory Workshop Manual M35 2007 INFINITI INFINITI https://www.carmanualsonline.info/img/42/57024/w960_57024-0.png INFINITI M35 2007 Factory Workshop Manual

Page 470 of 4647

INFINITI M35 2007  Factory Workshop Manual PREPARATION
ATC-19
C
D
E
F
G
H
I
K
L
MA
B
AT C
Revision: 2007 April2007 M35/M45
Commercial Service ToolsNJS000FY
Service hoses
High-pressure side hose
(J-39501-72)
Low-pressure side hose
(J-39502-72

Page 477 of 4647

INFINITI M35 2007  Factory Workshop Manual ATC-26
LUBRICANT
Revision: 2007 April2007 M35/M45
LUBRICANTPFP:KLG00
Maintenance of Lubricant Quantity in CompressorNJS000G3
The lubricant in the compressor circulates through the system with the refr

Page 579 of 4647

INFINITI M35 2007  Factory Workshop Manual ATC-128
INTAKE SENSOR
Revision: 2007 April2007 M35/M45
INTAKE SENSORPFP:27723
Removal and InstallationNJS000H9
REMOVAL
1. Remove low-pressure pipe 1 and high-pressure pipe 2. Refer to ATC-161, "Remova

Page 587 of 4647

INFINITI M35 2007  Factory Workshop Manual ATC-136
HEATER & COOLING UNIT ASSEMBLY
Revision: 2007 April2007 M35/M45
CAUTION:
Replace O-rings of low-pressure flexible hose and high-pressure pipe 1 with new ones, and then
apply compressor oil to

Page 607 of 4647

INFINITI M35 2007  Factory Workshop Manual ATC-156
REFRIGERANT LINES
Revision: 2007 April2007 M35/M45
5. Remove mounting nuts from low-pressure pipe and high-pres-
sure flexible hose.
CAUTION:
Cap or wrap the joint of low-pressure pipe and hig

Page 609 of 4647

INFINITI M35 2007  Factory Workshop Manual ATC-158
REFRIGERANT LINES
Revision: 2007 April2007 M35/M45
CAUTION:
Replace O-rings of low-pressure flexible hose and low-pressure pipe (VK45DE) with new ones,
and then apply compressor oil to it whe

Page 610 of 4647

INFINITI M35 2007  Factory Workshop Manual REFRIGERANT LINES
ATC-159
C
D
E
F
G
H
I
K
L
MA
B
AT C
Revision: 2007 April2007 M35/M45
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
Replace O-rings of high-pressure f

Page 611 of 4647

INFINITI M35 2007  Factory Workshop Manual ATC-160
REFRIGERANT LINES
Revision: 2007 April2007 M35/M45
b. Slide a disconnector toward (or upward) vehicle front until it clicks.
c. Slide A/C piping toward (or upward) vehicle front and disconnect

Page 613 of 4647

INFINITI M35 2007  Factory Workshop Manual ATC-162
REFRIGERANT LINES
Revision: 2007 April2007 M35/M45
13. Remove mounting bolt, and then remove low-pressure pipe 1
and high-pressure pipe 2.
CAUTION:
Cap or wrap the joint of expansion valve wit

Page 615 of 4647

INFINITI M35 2007  Factory Workshop Manual ATC-164
REFRIGERANT LINES
Revision: 2007 April2007 M35/M45
INSTALLATION
 Install liquid tank, and then install liquid tank bracket on condenser. 
CAUTION:
Make sure liquid tank bracket is securely in