ECO mode INFINITI Q40 2015 Quick Reference Guide

10

first drive features
4 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster button
to turn the system on. The A/C automatically turns on when
the defroster mode is selected. This feature removes humidity from the a\
ir.
Turn the temperature control dial
1 to set the desired temperature.

To defrost the front and side windows quickly, set the temperature contr\
ols and fan speed
controls to their maximum settings.
5 MODE BUTTON
Press the MODE button
to cycle through the following air flow outlets:



Air flows from the center and side vents.



Air flows from the center, side and foot vents.



Air flows mainly from the foot vents.



Air flows from the defroster and foot vents.
6 REAR WINDOW AND OUTSIDE MIRRORS DEFROSTER SWITCH
Press the rear window defroster switch
to turn the system on or off.

This function automatically turns off after approximately 15 minutes.
7 INTAKE AIR CONTROL BUTTON



AIR RECIRCULATION
Press the intake air control button
to recirculate interior air inside the vehicle. The indicator

light on the
side will illuminate. This system is used to avoid outside odors
and help to adjust the inside vehicle temperature more effectively.
The air recirculation mode cannot be activated when the climate control \
system is in the
front defroster mode
or the front defroster and foot vent mode .



OUTSIDE AIR CIRCULATION
Press the intake air control button
to draw outside air into the passenger compartment.
The
indicator light on the
side will illuminate.



AUTOMATIC INTAKE AIR CONTROL
In the auto mode, the intake air will be controlled automatically. To ma\
nually control the
intake air, press the intake air control button. To return to the automa\
tic control mode,
press the intake air control button for about 2 seconds.
8 A/C BUTTON

Press the A/C button to turn the air conditioner system on or off. This system helps \
cool
and dehumidify the air inside the cabin and defog the windows.
9 OFF BUTTON
Press the OFF button to turn the climate control system off.
For more information, refer to the “ Instruments and controls (section 2)” and the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
1811809_15b_Infiniti_Q40_QRG_091014.indd 109/10/14 3:42 PM

13
Trip Computer
When the button
1 is pressed, the following
modes will appear on the vehicle information
display
2:



•

MPG – Displays the current fuel consumption.



•

MPG/MPH – Displays the average fuel consumption
and speed since the last reset.



—


To reset the elapsed mpg/mph, press and hold

the
button 3 for more than 1 second. Both
elapsed mpg/mph will reset at the same time.



•

TIME/MILES – Displays the elapsed time and
total distance the vehicle has been driven since
the last reset.



—


To reset the elapsed time and total distance,
press and hold the
button 3 for more than 1 second. Both elapsed time and
total distance will reset at the same time.



•

RANGE – Displays the estimated distance to empty (dte) the vehicle can b\
e driven
before refueling.



•

OUTSIDE TEMP – Displays the exterior air temperature including a low temperature \
warning feature.



•

SETTING – Allows you to set reminders for alerts and maintenance intervals o\
r change the
language and units used in the system.



—


Press the button
3 to cycle through the various setting modes.



—


Press the button
1 to choose the selected mode.



•

WARNING – Displays when a warning is present.
Push the button 3 for approximately 1 second to reset the currently displayed trip
odometer to zero.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
1
3
system guide
2
1811809_15b_Infiniti_Q40_QRG_091014.indd 139/10/14 3:42 PM

14
Bluetooth® Hands-free Phone System
A cellular telephone should not be used while driving so
full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Press the or
button to interrupt the voice
prompts at any time and speak a command after
the tone.
To use the system faster, you may speak the second
level commands with the main menu command on the
main menu. For example, press the
or button
and after the tone say “Call Redial”. If your vehicle is
equipped with navigation refer to “Voice recognition
(section 9)” for more information.
The “Help” command can be used to hear a list of
available commands at any time.
Reduce background noise as much as possible by closing
windows and pointing HVAC vents away from the ceiling.
Say commands after the tone or press the or button to say a command at any time.
Speak naturally without long pauses and without raising your voice. When\
speaking

phonebook names, please be aware some phones require the last name to be\
spoken before
the first name. For example, “Michael Smith” may be spoken as “\
Smith Michael”.
To cancel a Voice Recognition session, simply wait 5 seconds, say “Ca\
ncel” or “Quit”, or press
and hold the
or button for 5 seconds.
If the Voice Recognition system does not recognize your voice commands, \
train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detail\
ed information.
For more detailed information and instructions, refer to your cellular p\
hone’s Owner’s Manual
and visit www.InfinitiUSA.com/bluetooth.
system guide
Bluetooth®
Controls
Microphone
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
1811809_15b_Infiniti_Q40_QRG_091014.indd 149/10/14 3:42 PM

17
Bluetooth® System without Navigation (if so equipped)
PAIRING PROCEDURE
1.
Press the
button on the steering wheel. The
system announces the available commands.
2

.



Say “Connect Phone”. The system acknowledges

the command and announces the next set of
available commands.
3.


Say “Add Phone”. The system acknowledges the

command and asks you to initiate connecting from the
phone handset.
4.


Initiate pairing from the phone.



•


The connecting procedure varies according to each cellular phone model. \
For detailed
connecting instructions and a list of compatible phones, please visit
www.InfinitiUSA.com/bluetooth

.



•


When prompted for a PIN code, enter “1234” from the handset. (The\
PIN code is
assigned by INFINITI and cannot be changed.)
5.


The system asks for a name for the cellular phone. You can give the cell\
ular phone a name of

your choice.
PHONEBOOK REGISTRATION
When the cellular phone is connected to the in-vehicle module, the data \
stored in the cellular
phone, such as phonebook, outgoing call logs, incoming call logs and mis\
sed call logs, is
automatically transferred and registered to the system.
The availability of this function depends on each cellular phone. The co\
pying procedure also
varies according to each cellular phone. See your cellular phone’s Ow\
ner’s Manual for
more information.
Up to 1,000 entries per registered cellular phone can be stored in the p\
honebook.
MAKING A CALL
1.


Push the button on the steering wheel. A tone will sound.
2.


Say “Call”. The system acknowledges the command and announces the \
next set of

available commands.
3.


Say the registered person’s name. The system acknowledges the command\
and announces the

next set of available commands.
4.


Say “Yes”. The system acknowledges the command and makes the call.\
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering wheel.
To reject the call, press the button on the steering wheel.
To hang-up, press the button on the steering wheel.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4\
)” of your Owner’s Manual
or please visit www.InfinitiUSA.com/bluetooth.
1811809_15b_Infiniti_Q40_QRG_091014.indd 179/10/14 3:43 PM