brake light INFINITI Q40 2015 Quick Reference Guide

*See your Owner’s Manual for information.
1 ADAPTIVE FRONT LIGHTING SYSTEM
(AFS) SWITCH*
2 INSTRUMENT BRIGHTNESS
CONTROL SWITCHES*
3 HEADLIGHT AND TURN SIGNAL SWITCH
4 TRIP RESET SWITCH*
5 VEHICLE INFORMATION DISPLAY
6 WINDSHIELD WIPER AND
WASHER SWITCH
7 STEERING WHEEL SWITCHES
FOR AUDIO* / BLUETOOTH®
8 CRUISE CONTROL
9 PUSH BUTTON IGNITION SWITCH
10 VEHICLE DYNAMIC CONTROL (VDC)
OFF SWITCH*
11 TRUNK LID RELEASE SWITCH
12 INTELLIGENT KEY PORT
13 PARKING BRAKE
14 CONTROL PANEL DISPLAY
15 AUDIO SYSTEM
16 CLIMATE-CONTROL SYSTEM
17 PASSENGER AIRBAG INDICATOR LIGHT
18 HEATED SEAT SWITCHES*
Behind
steering wheel
Behind
steering wheel Behind
steering wheel
Behind
steering wheel
12
3
456
789
14
15
16
17
1818
1011
1213
1811809_15b_Infiniti_Q40_QRG_091014.indd 49/10/14 3:41 PM

12
USB (Universal Serial Bus) Connection Port/iPod® Interface
The USB port 1 is located in the center console
under the arm rest.
When a compatible USB memory device or iPod®
is plugged into the USB port , compatible audio
and video files stored on the device can be played
through the vehicle’s audio system and front display.
For more information, refer to the “ Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
Cruise Control
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph
(40 km/h).
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/
OFF switch
1. The CRUISE indicator light in the
instrument panel will illuminate.
To set a cruising speed, accelerate the vehicle to the desired speed, pu\
sh the COAST/SET
switch
2 and release. The
CRUISE SET indicator light
in the instrument panel will illuminate.
Take your foot off the accelerator pedal. Your vehicle will maintain the\
set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch
3. When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch
2. Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, tap the brake pedal or push the CANCEL switch
4.
To turn off cruise control, push the ON/OFF switch
1. The CRUISE indicator light
in the




instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1
2
34
1
first drive features
1811809_15b_Infiniti_Q40_QRG_091014.indd 129/10/14 3:42 PM

19
DVD Player (if so equipped)
With this DVD Player, you can play video files via a
DVD or CD from the front display.
To view movies on the front display, stop the
vehicle in a safe location, move the shift lever to
the P (PARK) position and apply the parking brake.
To reduce driver distraction, movies will not be
shown on the front display while the vehicle is in
any drive position.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
HomeLink® Universal Transceiver
The HomeLink® Universal
Transceiver can learn and
consolidate the functions of
up to three different hand-held
transmitters, operating items
such as garage doors, property
gates, outdoor and indoor
lights or alarm systems.
To program the HomeLink® Universal Transceiver:



•


Position the handheld transceiver 1-3 in (26-76 mm) away from the Home\
Link surface,
keeping the HomeLink indicator light in view.



•


Press and hold the desired HomeLink button and the handheld transmitter button
simultaneously until the HomeLink indicator light flashes slowly and the\
n rapidly.



•


Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink button\
and observe the
indicator light:



•

A solid, continuous light indicates the programing is complete and the H\
omeLink button
will activate your device.



•

A blinking light that turns to a solid, continuous light after 2 seconds\
indicates additional
steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete th\
e
programing process:



•

At the receiver of the device that you are programing to the HomeLink bu\
tton, press
and release the “learn” or “smart” button (the name may var\
y by manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.



•

Press and hold the programed HomeLink button for 2 seconds and release.
You may have to repeat the previous 2 steps up to 3 times to complete th\
e programing
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
HOMELINK
1811809_15b_Infiniti_Q40_QRG_091014.indd 199/10/14 3:43 PM