homelink INFINITI Q50 2014 Owners Manual

JVC0518X
1. Coat hooks (P.2-48)
2. Rear personal light (P.2-54)
3. Sun visors (P.3-25)
4. Map light (P.2-53)—SOS call switch (if so equipped)* 5. Moonroof switch (if so equipped)
(P.2-51)
6. Sunglasses holder (P.2-46)
7. Power window switch (P.2-49)
8. Automatic drive positioner switch (if so equipped) (P.3-29) 9. Inside mirror
—Operation (P.3-26)
— HomeLink
®universal transceiver (if
so equipped) (P.2-56)
— Compass (if so equipped) (P.2-9)
10. Trunk pass-through/Rear armrest (P.1-7)
11. Rear cup holders (P.2-45)
12. Rear ashtray (if so equipped) (P.2-44)
13. Console box (P.2-47) —Power outlet (P.2-44)
— Media hub*
14. Front cup holders (P.2-45)
15. Front passenger air bag status light (P.1-49)
*: Refer to the Infiniti InTouch Owner’s Manual.
Illustrated table of contents0-5
PASSENGER COMPARTMENT

Windows ........................................................... 2-49Power windows ............................................. 2-49
Moonroof (if so equipped) ................................. 2-51 Automatic moonroof ...................................... 2-52
Interior lights..................................................... 2-53 Map lights..................................................... 2-53
Console light (if so equipped)........................ 2-54
Personal lights .............................................. 2-54
Interior light control switch............................ 2-54
Vanity mirror lights ............................................ 2-55
Trunk light ......................................................... 2-56
Courtesy light .................................................... 2-56 HomeLink®Universal Transceiver (if
so equipped)..................................................... 2-56
Programming HomeLink
®............................. 2-57
Programming HomeLink®for Canadian
customers and gate openers........................ 2-59
Operating the HomeLink
®
Universal Transceiver ................................... 2-59
Programming troubleshooting ...................... 2-59
Clearing the programmed information .......... 2-60
Reprogramming a single
HomeLink
®button ....................................... 2-60
If your vehicle is stolen ............................... 2-60

2-56Instruments and controls
The light illuminates when the trunk lid is
opened. When the trunk lid is closed, the
light will turn off.
The light will also turn off after a period of
time when the light remains illuminated
after the ignition switch has been pushed
to the OFF or LOCK position to prevent the
battery from becoming discharged.
SIC4328
When the doors are unlocked by pushing
the UNLOCK button on the Intelligent Key
or touching the one touch unlock sensor
with the ignition switch in the LOCK
position, the courtesy light
*Awill illumi-
nate.
To activate or deactivate the courtesy light,
set [Lamp ON When Door Unlocks]. See the
Infiniti InTouch Owner’s Manual. The HomeLink
®Universal Transceiver pro-
vides a convenient way to consolidate the
functions of up to three individual hand-
held transmitters into one built-in device.
HomeLink
®Universal Transceiver:
. Will operate most Radio Frequency (RF)
devices such as garage doors, gates,
home and office lighting, entry door
locks and security systems.
. Is powered by your vehicle’s battery. No
separate batteries are required. If the
vehicle’s battery is discharged or is
disconnected, HomeLink
®will retain all
programming.
When the HomeLink
®Universal Transcei-
ver is programmed, retain the original
transmitter for future programming proce-
dures (Example: new vehicle purchases).
Upon sale of the vehicle, the programmed
HomeLink
®Universal Transceiver buttons
should be erased for security purposes.
For additional information, refer to “Pro-
gramming HomeLink
®” (P.2-57).
WARNING
. Do not use the HomeLink®Universal
Transceiver with any garage door opener
that lacks safety stop and reverse
TRUNK LIGHT COURTESY LIGHT HomeLink®UNIVERSAL TRANSCEIVER (if so
equipped)

features as required by federal safety
standards. (These standards became
effective for opener models manufac-
tured after April 1, 1982). A garage door
opener which cannot detect an object in
the path of a closing garage door and
then automatically stop and reverse,
does not meet current federal safety
standards. Using a garage door opener
without these features increases the risk
of serious injury or death.
. During the programming procedure your
garage door or security gate will open
and close (if the transmitter is within
range). Make sure that people or objects
are clear of the garage door, gate, etc.
that you are programming.
. Your vehicle’s engine should be turned
off while programming the HomeLink
®
Universal Transceiver. Do not breathe
exhaust gases; they contain colorless
and odorless carbon monoxide. Carbon
monoxide is dangerous. It can cause
unconsciousness or death.
PROGRAMMING HomeLink®
If you have any questions or are having
difficulty programming your HomeLink®
buttons, refer to the HomeLink®web site
at: www.homelink.com or call 1-800-355-
3515.
NOTE:
It is also recommended that a new battery
be placed in the hand-held transmitter of
the device being programmed to
HomeLink
®for quicker programming and
accurate transmission of the radio-fre-
quency.
1. Position the end of your hand-held transmitter 1-3 in (26-76 mm) away
from the HomeLink
®surface, keeping
the HomeLink®indicator light*1in
view.
JVI0428X
2. Using both hands, simultaneously
press and hold the desired HomeLink®
button and handheld transmitter but-
ton. DO NOT release until the
HomeLink
®indicator light*1flashes
slowly and then rapidly. When the
indicator light flashes rapidly, both
buttons may be released. (The rapid
flashing indicates successful program-
ming.)
NOTE:
Some devices to be programmed may
require you to replace Step 2 with the
cycling procedure noted in the “Pro-
gramming HomeLink
®for Canadian
Instruments and controls2-57

2-58Instruments and controls
customers and gate openers”(P.2-59).
JVI0429X
3. Press and hold the programmed
HomeLink®button and observe the
indicator light.
.If the indicator light*1is solid/
continuous, programming is com-
plete and your device should acti-
vate when the HomeLink
®button is
pressed and released.
.If the indicator light*1blinks
rapidly for two seconds and then
turns to a solid/continuous light,
continue with Steps 4-6 for a rolling
code device. A second person may
make the following steps easier. Use
a ladder or other device. Do not stand on your vehicle to perform the
next steps.
4. At the receiver located on the garage door opener motor in the garage, locate
the “learn” or“smart” button (the
name and color of the button may vary
by manufacturer but it is usually
located near where the hanging anten-
na wire is attached to the unit). If there
is difficulty locating the button, refer-
ence the garage door opener’s manual.
5. Press and release the “learn” or
“smart” button.
NOTE:
Once the button is pressed, you have
approximately 30 seconds to initiate
the next step.
6. Return to the vehicle and firmly press and hold the programmed HomeLink
®
button for two seconds and release.
Repeat the “press/hold/release” se-
quence up to 3 times to complete the
programming process. HomeLink
®
should now activate your rolling code
equipped device.
7. If you have any questions or are having difficulty programming your
HomeLink
®buttons, refer to the

HomeLink®web site at: www.homelink.
com or call 1-800-355-3515.
PROGRAMMING HomeLink®FOR
CANADIAN CUSTOMERS AND GATE
OPENERS
Canadian radio-frequency laws require
transmitter signals to “time-out”(or quit)
after several seconds of transmission –
which may not be long enough for
HomeLink
®to pick up the signal during
programming. Similar to this Canadian
law, some U.S. gate operators are de-
signed to “time-out” in the same manner.
If you live in Canada or you are having
difficulties programming a gate operator or
garage door opener by using the “Pro-
gramming HomeLink
®” procedures, re-
place “Programming HomeLink®”Step 2
with the following:
NOTE:
When programming a garage door opener,
etc., unplug the device during the “cy-
cling” process to prevent possible damage
to the garage door opener components.
Step 2: Using both hands, simultaneously
press and hold the desired HomeLink
®
button and the hand-held transmitter button. During programming, your hand-
held transmitter may automatically stop
transmitting. Continue to press and hold
the desired HomeLink
®button while you
press and re-press (“cycle”) your hand-
held transmitter every two seconds until
the frequency signal has been learned. The
HomeLink
®indicator light will flash slowly
and then rapidly after several seconds
upon successful programming. DO NOT
release until the HomeLink
®indicator light
flashes slowly and then rapidly. When the
indicator light flashes rapidly, both buttons
may be released. The rapid flashing
indicates successful programming.
Proceed with “Programming HomeLink
®”
step 3 to complete.
Remember to plug the device back in when
programming is completed.
OPERATING THE HomeLink®UNI-
VERSAL TRANSCEIVER
The HomeLink®Universal Transceiver, after
it is programmed, can be used to activate
the programmed device. To operate, simply
press and release the appropriate pro-
grammed HomeLink
®Universal Transceiver
button. The amber indicator light will
illuminate while the signal is being trans- mitted.
For convenience, the hand-held transmitter
of the device may also be used at any time.
PROGRAMMING TROUBLESHOOT-
ING
If the HomeLink®does not quickly learn
the hand-held transmitter information:
. replace the hand-held transmitter bat-
teries with new batteries.
. position the hand-held transmitter with
its battery area facing away from the
HomeLink
®surface.
. press and hold both the HomeLink®
and hand-held transmitter buttons
without interruption.
. position the hand-held transmitter 1-3
in (26-76 mm) away from the
HomeLink
®surface. Hold the transmit-
ter in that position for up to 15
seconds. If HomeLink
®is not pro-
grammed within that time, try holding
the transmitter in another position -
keeping the indicator light in view at all
times.
If you have any questions or are having
difficulty programming your HomeLink
®
buttons, refer to the HomeLink®web site
at: www.homelink.com or 1-800-355-3515.
Instruments and controls2-59

2-60Instruments and controls
CLEARING THE PROGRAMMED IN-
FORMATION
The following procedure clears the pro-
grammed information from both buttons.
Individual buttons cannot be cleared.
However, individual buttons can be repro-
grammed, see“Reprogramming a single
HomeLink
®button” (P.2-60).
To clear all programming
1. Press and hold the two outer
HomeLink®buttons until the indicator
light begins to flash in approximately
10 seconds. Do not hold for longer than
20 seconds.
2. Release both buttons.
HomeLink
®is now in the programming
mode and can be programmed at any time
beginning with “Programming HomeLink
®”
- Step 1.
REPROGRAMMING A SINGLE
HomeLink®BUTTON
To reprogram a HomeLink®Universal
Transceiver button, complete the following.
1. Press and hold the desired HomeLink
®
button. Do notrelease the button. 2. The indicator light will begin to flash
after 20 seconds. Without releasing the
HomeLink
®button, proceed with “Pro-
gramming HomeLink®” - Step 1.
For questions or comments, contact
HomeLink
®at: www.homelink.com or 1-
800-355-3515.
The HomeLink
®Universal Transceiver but-
ton has now been reprogrammed. The new
device can be activated by pushing the
HomeLink
®button that was just pro-
grammed. This procedure will not affect
any other programmed HomeLink
®but-
tons.
IF YOUR VEHICLE IS STOLEN
If your vehicle is stolen, you should change
the codes of any non-rolling code device
that has been programmed into
HomeLink
®. Consult the Owner’s Manual
of each device or call the manufacturer or
retailer of those devices for additional
information.
When your vehicle is recovered, you will
need to reprogram the HomeLink
®Uni-
versal Transceiver with your new transmit-
ter information. FCC Notice:
For USA:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference that
may cause undesired operation.
NOTE:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
For Canada:
This device complies with RSS-210 of
Industry Canada. Operation is subject to
the following two conditions: (1) this
device may not cause interference, and
(2) this device must accept any interfer-
ence, including interference that may
cause undesired operation of the device.

SPA2422A
Type A
SPA2450
Type B
Automatic anti-glare type
The inside mirror is designed so that it
automatically changes reflection according
to the intensity of the headlights of the
following vehicle.
The anti-glare system will be automatically
turned on when the ignition switch is
pushed to the ON position.
The anti-glare system also operates for the
outside mirrors (if so equipped).
When the anti-glare system is turned on,
the indicator light
*Awill illuminate and
excessive glare from the headlights of the
vehicle behind you will be reduced.
Type A: Push the
switch*Bto make the
inside mirror operate normally and the
indicator light will turn off. Push the
switch again to turn the system on.
Type B: Push the “*”switch
*Cto make
the inside mirror operate normally. The
indicator light will turn off. Push the “I”
switch
*Dto turn the system on.
Do not allow any object to cover the
sensors
*Eor apply glass cleaner on
them. Doing so will reduce the sensitivity
of the sensor, resulting in improper
operation. For the compass (if so equipped) opera-
tion, see
“Compass” (P.2-9).
For the HomeLink
®Universal Transceiver (if
so equipped) operation, see “HomeLink®
Universal Transceiver”(P.2-56).
OUTSIDE MIRRORS
WARNING
Objects viewed in the outside mirror on the
passenger side are closer than they appear.
Be careful when moving to the right. Using
only this mirror could cause an accident.
Use the inside mirror or glance over your
shoulder to properly judge distances to
other objects.
Pre-driving checks and adjustments3-27

Forward emergency braking system
warning light .................................................... 2-13
Front passenger air bag and status light ........... 1-49
Front power seat adjustment ............................... 1-3
Front seatFront seat adjustment .................................... 1-3
Fuel
Capacities and
recommended fuel/lubricants ........................ 9-2
Fuel economy............................................. 5-100
Fuel information ............................................. 9-4
Fuel octane rating .......................................... 9-4
Fuel-filler cap ............................................... 3-21
Fuel-filler door ............................................. 3-21
Gauge ............................................................ 2-9
Fuel Efficient Driving Tips .................................. 5-99
Fuses ................................................................ 8-22
Fusible links ..................................................... 8-22
G
Garage door opener
HomeLink®Universal Transceiver ................. 2-56
Gas cap ............................................................ 3-21
Gauge ................................................................. 2-6
Engine coolant temperature gauge ................. 2-8
Fuel gauge ..................................................... 2-9
Odometer....................................................... 2-7
Speedometer ................................................. 2-7
Tachometer .................................................... 2-8
Trip computer .............................................. 2-28
General maintenance .......................................... 8-2 Glove box ......................................................... 2-47
H
Hazard warning flasher switch ............................ 6-2
Head restraints/headrests ................................... 1-8
Headlights
Aiming control (See Adaptive Front lighting
System (AFS)) .............................................. 2-41
Headlight switch .......................................... 2-36
Heated seats ...................................................... 1-5
Heater Engine block heater ................................... 5-113
High beam assist .............................................. 2-38
Hill start assist system ................................... 5-111
HomeLink
®Universal Transceiver ...................... 2-56
Hood release .................................................... 3-18
Hook Coat hooks .................................................. 2-48
Trunk hooks ................................................. 2-48
Horn ................................................................. 2-43
I
Ignition switch
(Push-button) ............................................... 5-10
Automatic transmission models ................... 5-15
Immobilizer system ........................................... 2-32
Indicator Vehicle information display .......................... 2-20
Indicator lights ................................................. 2-17 Indicators for operation (vehicle
information display) .......................................... 2-22
INFINITI Drive Mode Selector ............................. 5-21
Infiniti InTouch Owner’s Manual .......................... 4-2
INFINITI Vehicle Immobilizer System .................. 2-32
Engine start ................................................. 2-32
Inside mirror ..................................................... 3-26
Inspection/maintenance (I/M) test .................... 9-22
Instrument brightness control ........................... 2-42
Instrument panel ................................................ 2-5
Intelligent All-Wheel Drive (AWD) ..................... 5-101
Intelligent Cruise Control (ICC) system ............... 5-58
Intelligent Cruise Control (ICC) system
ON indicator ..................................................... 2-24
Intelligent Key ..................................................... 3-2
Intelligent Key system ......................................... 3-6
Battery replacement ..................................... 8-24
Key operating range ....................................... 3-8
Key operation ................................................ 3-9
Warning signals ........................................... 3-12
Interior light control switch ............................... 2-54
Interior light replacement .................................. 8-27
Interior lights .................................................... 2-53
Interior trunk lid release ................................... 3-21
ISOFIX child restraint ........................................ 1-26
J
Jump starting ...................................................... 6-9
10-3

TPMS, Tire pressure monitoring systemTPMS with Tire Inflation Indicator................... 5-7
Trailer towing .................................................... 9-19
Transceiver
HomeLink
®Universal Transceiver ................. 2-56
Transmission
Automatic transmission fluid (ATF) ............... 8-12
Driving with automatic transmission ............ 5-15
Transmission shift lever lock release ............ 5-18
Transmitter (See remote keyless entry system) ... 3-14
Traveling or registering your vehicle in
another country ................................................ 9-11
Trip computer ................................................... 2-28
Trip odometer ................................................... 2-28
Trunk Interior trunk lid release .............................. 3-21
Light ............................................................ 2-56
Pass-through ................................................. 1-7
Trunk hooks ................................................. 2-48
Trunk lid ...................................................... 3-19
Trunk lid release switch ............................... 3-19
Trunk open request switch ........................... 3-19
Trunk release power cancel switch ............... 3-20
Turn signal switch ............................................. 2-42
U
Underbody cleaning ............................................ 7-3
Uniform tire quality grading .............................. 9-19
V
Vanity mirror ..................................................... 3-29
Vanity mirror lights ........................................... 2-55
Variable voltage control system ........................ 8-17
Vehicle
Dimensions .................................................. 9-10
Recovery (freeing a stuck vehicle) ................ 6-16
Vehicle Dynamic Control (VDC) off switch ..... 2-43
Vehicle Dynamic Control (VDC) system ....... 5-108
Vehicle Dynamic Control (VDC)
warning light ............................................... 2-17
Vehicle identification number (VIN) ................... 9-11
Vehicle information display ............................... 2-20
Vehicle loading information .............................. 9-16
Vehicle security system ..................................... 2-31
Ventilators .......................................................... 4-2
W
Warning
Blind Spot Warning (BSW) system ................ 5-38
Flat Tire - Visit dealer warning ..................... 2-23
Hazard warning flasher switch ....................... 6-2
Indicators for operation (vehicle
information display) ..................................... 2-22
Lane Departure Warning (LDW) system ......... 5-31
Predictive forward collision
warning system ........................................... 5-94
Tire Pressure Monitoring
System (TPMS) .............................. 5-4, 6-3, 8-29
Vehicle information display .......................... 2-20 Warning/indicator lights and
audible reminders ........................................ 2-12
Warning labels Air bag warning labels ................................. 1-55
Warning light Air bag warning light ......................... 1-55, 2-16
Anti-lock Braking System (ABS)
warning light ............................................... 2-12
Brake warning light ...................................... 2-13
Forward emergency braking system
warning light ............................................... 2-13
Low fuel warning light ................................. 2-14
Low tire pressure warning light .................... 2-14
Power steering warning light ........................ 2-16
Seat belt warning light and chime ............... 2-16
Warranty
Emission control system warranty ................ 9-20
Washer switch Windshield wiper and washer switch ........... 2-33
Washing ............................................................. 7-2
Waxing ............................................................... 7-2
Wheel/tire size ................................................... 9-9
Wheels and tires ............................................... 8-29 Care of wheels ............................................... 7-3
Cleaning aluminum alloy wheels .................... 7-3
Cleaning bright wheels .................................. 7-4
Window washer fluid ........................................ 8-14
Window(s)
Cleaning ........................................................ 7-3
Power windows ............................................ 2-49
Windshield wiper and washer switch ................ 2-33
10-7