lock INFINITI Q50 HYBRID 2018 Warranty Information Booklet
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2018, Model line: Q50 HYBRID, Model: INFINITI Q50 HYBRID 2018Pages: 60, PDF Size: 0.27 MB
Page 10 of 60
62018 NEW HYBRID VEHICLE LIMITED WARRANTY
LIMITATION OF WARRANTIES AND
OTHER WARRANTY TERMS AND STATE
LAW RIGHTS EXTRA EXPENSES -
LIMITATIONS OF DAMAGES
THIS WARRANTY DOES NOT COVER
INCIDENTAL OR CONSEQUENTIAL
DAMAGES SUCH AS LOSS OF THE USE
OF THE VEHICLE, INCONVENIENCE OR
COMMERCIAL LOSS.
ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE SHALL BE
LIMITED TO THE DURATION OF THIS
WRITTEN WARRANTY.
Some states do not allow the exclusion or
limitation of incidental or consequential
damages or limitations on how long an
implied warranty lasts, so the above
limitations or exclusions may not apply to
you. This warranty gives you specific legal
rights, and you may also have other rights
which vary from state to state.
Infiniti does not authorize any person to
create for it any other warranty, obligation
or liability in connection with this vehicle.
THE WARRANTY BEGINS
The warranty period begins on the date the
vehicle is delivered to the first retail buyer or
put into service, whichever is earlier.
FOR HOW LONG AND WHAT IS
COVERED
BASIC COVERAGE
• The basic coverage period is 48 months or 60,000 miles, whichever comes first.
• The warranty covers any repairs needed to correct defects in materials or workmanship
of all parts and components of each new
Infiniti vehicle supplied by Infiniti subject
to the exclusions listed under the heading
“WHAT IS NOT COVERED” or, if the part is
covered by one of the separate coverages
described in the following sections of this
warranty, that specific coverage applies
instead of the basic coverage.
POWERTRAIN COVERAGE
• The Powertrain coverage period is 72 months or 70,000 miles, whichever comes first.
• This warranty covers any repairs needed to correct defects in material or workmanship.
• Powertrain coverage includes components listed below under the headings Engine,
Transmission and Transaxle, Drivetrain, and
Restraint System, supplied by Infiniti, subject
to the exclusions listed under the heading
“WHAT IS NOT COVERED.”
ENGINE - Cylinder heads and block and
all internal parts, rocker covers and oil pan,
valve train and front cover, timing chain and
tensioner, oil pump, water pump and fuel
pump, fuel injectors, intake and exhaust
manifolds, flywheel, seals and gaskets. TRANSMISSION AND TRANSAXLE
- Case and all internal parts, torque
converter and converter housing,
automatic transmission control module,
transfer case and all internal parts, seals
and gaskets, clutch cover and housing,
A/T cooler, and electronic transmission
controls.
DRIVETRAIN - Drive shafts, final drive
housing and all internal parts, propeller
shafts, universal joints, bearings, seals and
gaskets.
RESTRAINT SYSTEM - Air bags and
related electronic control systems.
CORROSION COVERAGE (PERFORATION
FROM CORROSION)
Any body sheet metal panel supplied by Infiniti
found to have developed perforation (rust-
through) due to corrosion in normal use is
covered for 84 months, regardless of mileage,
except for those items listed under “WHAT IS
NOT COVERED.” No additional rust proofing
applications are required. Perforation is a
condition in which any body sheet metal panel
has corroded from one surface to another.
HYBRID ELECTRIC VEHICLE (HEV) SYSTEM
COVERAGE
• The HEV System coverage period is 96 months or 100,000 miles, whichever come
first.
• This warranty covers any repairs needed to correct defects in materials or workmanship.
(Continued on next page)
Page 36 of 60
32
tires. Excessively worn tires are also more
susceptible to penetrations.
DO CHECK YOUR TIRES FOR
DAMAGE
Frequent (at least monthly) inspection of your
tires for signs of damage and their general
condition is important for safety. If you have
any questions, have your tire Retailer inspect
them. Impacts, penetrations, cracks, knots,
bulges or air loss always require tire removal
and expert inspection. Never perform a
temporary repair or use an inner tube as a
substitute for a proper repair. Only qualified
persons should repair tires.
PROPER TIRE REPAIR
NOTE: Goodyear and Dunlop do not warrant
any inspection or repair process. The repair is
entirely the responsibility of the repairer and
should be made in accordance with established
Rubber Manufacturers Association (RMA)
procedures.
TIRE PRESSURE MONITORING
SYSTEM ALERT
Refer to your vehicle Owner’s Manual for more
information on what to do if the tire pressure
warning system activates.
THE CONVENIENCE (TEMPORARY)
SPARE
The Convenience (Temporary) Spare is designed,
built, and tested to the high engineering
standards set by North America’s leading car
manufacturers and to Goodyear and Dunlop’s own high standards of quality control. It is
designed to take up a minimum of storage
space and, at the same time, fulfill the function
of a spare tire when needed. The spare is kept in
its storage space, fully inflated at 60 psi. To be
sure it is always ready for use, the air pressure
should be checked on a regular basis.
The Convenience (Temporary) Spare can be
used in combination with the original tires
on your vehicle. You can expect a tire tread
life of up to 3,000 miles (4,800 kilometers),
depending on road conditions and your driving
habits. To conserve tire tread life, return the
spare to the storage area as soon as it is
convenient to have the standard tire repaired
or replaced.
The Convenience (Temporary) Spare weighs
less than a standard tire so it’s easier to handle.
It also helps reduce the total car weight which
contributes to fuel economy.
The wheels used with the Convenience
(Temporary) Spare are specifically designed for
use with high pressure spares and should never
be used with any other type tire.
DON’T ATTEMPT TO MOUNT YOUR
OWN TIRES
Serious injury or Death may result from
explosion of tire/ rim assembly due to
improper mounting procedures. Follow tire
manufacturer’s instructions and match tire
diameter to rim diameter. Mount light truck
radials on rims approved for radial service. Do
not apply bead sealer. This can inhibit bead
seating. Lubricate beads and tire rim (including
tube or flap) contact surfaces. Lock assembly
on mounting machine or place in safety cage.
STAND BACK and never exceed 40 psi to
seat beads. Never use a volatile substance or a
rubber “donut” (also known as a bead expander
or “O-Ring”) to aid bead seating. Only
specially-trained persons should mount tires.
DON’T MIX TIRES OF DIFFERENT
SIZES AND TYPES ON THE SAME
AXLE
For optimum handling and control, Goodyear
and Dunlop recommend fitment of four (4) tires
of the same type and size unless otherwise
specified by the vehicle manufacturer.
WARNING: Before you replace your tires,
always consult the vehicle Owner’s Manual and
follow the vehicle manufacturer’s replacement
tire recommendations. Vehicle handling may
be significantly affected by a change in tire
size or type. When selecting tires that are
different than the Original Equipment size,
see a professional installer in order to make
certain that proper clearance, load carrying
capacity and inflation pressure is selected.
Never exceed the maximum load capacity and
inflation pressure listed on the sidewall of the
tire. Always drive safely and obey all traffic
laws. Avoid sudden, sharp turns or lane changes.
Failure to follow this warning may result in loss
of control of the vehicle, leading to an accident
and serious injury or death.
GOODYEAR/DUNLOP TIRE LIMITED WARRANTY
(Continued on next page)
Page 48 of 60
44IMPORTANT TIRE SAFETY INFORMATION¹
result in tire destruction. When inspecting
your tires, including the spare, check your air
pressures. If your pressure check indicates
that one of your tires has lost pressure of two
pounds or more, look for signs of penetrations,
valve leakage, or wheel damage that may
account for the air loss.
All tires will wear out faster when subjected
to high speeds as well as hard cornering, rapid
starts, sudden stops, frequent driving on roads
which are in poor condition, and off-road use.
Roads with holes and rocks or other objects
can damage tires and cause misalignment of
your vehicle. When you drive on such roads,
drive on them carefully and slowly, and before
driving again at normal or highway speeds,
examine your tires for any damage, such
as cuts, bulges, penetrations, unusual wear
patterns, etc.
TREAD WEAR INDICATORS (WEAR BARS):
Tires contain Tread Wear Indicators (Wear
Bars) in the grooves of the tire tread which
show up when only 2/32nds of an inch
(1.6mm) of tread is remaining. At this stage,
your tires must be replaced. Tires worn beyond
this stage are dangerous.
HAZARDS
Objects in the road that threaten a tire should
be safely avoided. These objects are potholes,
glass, metal, rocks, wood debris and the
like. Unavoidable contact should prompt a
thorough tire inspection. You may not always recall hitting an object
that can damage or injure your tires. If while
driving your vehicle experiences any unusual
vibrations, ride disturbance or noise and/or you
suspect that possible damage to the tires or
vehicle has occurred, DO NOT JAM OR LOCK
YOUR BRAKES! Rather reduce your speed and
drive with caution until you can safely pull off
the road. Stop and inspect the tires. If the tire
is underinflated or damaged, deflate, remove
the tire and rim assembly and replace it with
your spare. If you cannot detect a cause, have
the vehicle towed to the nearest vehicle or tire
retailer to have the vehicle inspected.
REPAIRING, MOUNTING AND
DEMOUNTING OF TIRES
Do not attempt to repair, mount or demount a
tire yourself. Tire changing can be dangerous
and must be done by professionally trained
persons using proper tools and procedures
as specified by the Rubber Manufacturers
Association (RMA). Follow these mounting
recommendations. Your tires should be
mounted on wheels of correct size and type
and which are in good, clean condition. Bent,
chipped or rusted wheels may cause tire
damage. The inside of the tire must be free
from foreign materials. Have your retailer
check the wheels before mounting new tires.
Mismatched tires and rims can explode during
mounting. Also, mismatched tires and rims can
result in dangerous tire failure on the road. If
a tire is mounted by error on the wrong-sized
rim, do not remount it on the proper rim - scrap it. It may be damaged internally (which
is not externally visible) by being dangerously
stretched and could fail on the highway.
Old valves may leak. When new tubeless tires
are mounted, have new valves of the correct
type installed. Tubeless tires must be mounted
only on wheels designed for tubeless tires, i.e.,
wheels which have safety humps or ledges.
Never perform a temporary repair, use an
innertube or inject sealant as a permanent
substitute for a proper repair. Only qualified
persons should repair tires.
Be sure that all your valves have suitable valve
caps. This will keep valve cores clean and clear
and guard against leakage.
REPAIRS - WHENEVER POSSIBLE, SEE
A TIRE RETAILER AT ONCE.
Some tire
manufacturers do not warrant any inspection
or repair process. The repair is entirely the
responsibility of the repairer. Punctures in
the tread of a passenger tire which do not
exceed 1/4 of an inch (6mm) in diameter can
usually be repaired by following the Rubber
Manufacturer’s Association (RMA) Passenger
and Light Truck Repair procedures. Contact
the manufacturer of your tires for its position
and assistance as to the acceptable location
for a proper repair and the repair of speed
rated tires. Do not use plug repairs. They may
cause further damage to the tire. They are not
always air tight and the plug may fail. Do not
exceed posted speed limits on any repaired tire.
(Continued on next page)
Page 52 of 60
48INFINITI TOTAL OWNERSHIP EXPERIENCE® BENEFITS
ROADSIDE ASSISTANCE
As part of the Infiniti Total Ownership
Experience® , Roadside Assistance is available
to you, 24 hours a day, 365 days a year, for
emergency roadside assistance should the
need arise for any of the following items:
• Mechanical Breakdown
• Flat Tire
• Accident/Collision (One-way tow – loaner vehicle not included)
• Out of Gas
• Lock-out service
• Dead 12V Battery
All Roadside Assistance services are provided
exclusively by Cross-Country Motor Club,
Inc., Boston, Massachusetts 02155, except
in Alaska, California, Oregon, Wisconsin and
Wyoming, where services are provided by
Cross-Country Motor Club of California, Inc.,
Boston, Massachusetts 02155.
HOW TO USE ROADSIDE ASSISTANCEShould one of the disablements listed
above occur, simply call the toll free number,
1-800-662-6200, and advise the Roadside
Assistance Representative of your name, the
vehicle identification number (VIN) of your car,
your location, and the nature of the problem.
(When travelling in Canada call 1-800-835-
0221.) The VIN can be found imprinted on
a plate affixed to the upper dashboard on
the driver’s side of your Infiniti. The VIN is
also printed on the permanent Infiniti Total Ownership
® Program card which will be sent
to you approximately 6 weeks after purchase
of your new Infiniti.
COVERAGERoadside Assistance is provided for all Infiniti
vehicles from the date the vehicle is delivered
to the first retail buyer or otherwise put into
use, whichever is earlier, for a period of 48
months, without regard to mileage.
Roadside Assistance is available to anyone
operating the Infiniti vehicle with the
authorization of the owner. [For purpose of
Roadside Assistance benefits, “owner” includes
the lessee of a leased vehicle.] These services
are transferable with the resale of the vehicle
for the time remaining on the original Infiniti
new vehicle limited warranty coverage period.
Roadside Assistance is available throughout
the Continental United States and Canada.
ON-SITE AND TOWING SERVICEDepending on the type of vehicle problem you
are experiencing, the Roadside Assistance
Representative will determine the appropriate
roadside assistance and/or flatbed (towing)
service to be dispatched. In most cases, minor
disablement services such as flat tire change,
lock-out service, out-of-gas delivery, etc., can
be performed onsite so that you can be on
the road again as soon as possible. There is
no charge for the dispatch of onsite or towing
service. Any charges for the replacement of
keys, gas or non-warranty items will be your
responsibility at the time of the repair or
service. Whenever possible, flatbed (towing) service
will be dispatched for mechanical disablements
or accident/ collisions which render the vehicle
inoperative. There is no charge for the towing
service. Roadside Assistance will arrange to
transport the vehicle to the nearest Infiniti
retailer , if one is located within 250 miles,
or to another authorized alternate service
facility. Warranty covered repairs will be
provided for under the terms of the applicable
express Infiniti limited warranty. However, any
nonwarranty or accident/collision repairs will
be your responsibility.
NOTE: You may be required to sign a receipt at
the time of disablement to acknowledge receipt
of the Roadside Assistance service rendered.
EXCLUSIONSRoadside Assistance is not a warranty and
is not provided under any Infiniti or Nissan
warranty,
but is a service which is provided
to you as part of the Infiniti Total Ownership
Experience
® to minimize any unforeseen
vehicle operation inconvenience. Potential
liability is expressly limited to the cost of
the listed benefits and does not extend to
incidental or consequential damages such
as loss of use inconvenience, loss of pay, or
commercial loss.
Roadside Assistance benefits exclude any
costs related to repairs, parts replacement,
labor, etc. which are incurred as a result of
accident/collision, vehicle abuse, racing,
(Continued on next page)