light INFINITI Q60 COUPE 2014 Quick Reference Guide

19
Navigation System (if so equipped)
y our Navigation System can calculate a route from the current location to\
a preferred
destination. The real-time map display and turn-by-turn voice guidance w\
ill lead you along
the route.
The Navigation System will continually update your vehicle’s position\
. If you have deviated
from the original route, it will recalculate the route from your current\
location.
01 Touch screen display.
02 S t A t US – Press multiple times to display audio information, the air conditi\
oner status, fuel
economy or navigation directions.
03 Destination (DES t ) – Press to enter a destination.
04 ZOOM OUt – Press to view a wider area.
05 r OU t E
– Press to access guidance control functions such as guidance cancell\
ation, route
priority or waypoint setting on the route.
06 Infiniti Controller
•


EN
t E r – Press the EN
t E r button to select the highlighted item on the screen.



•

Center Dial – Turn the dial to highlight an item on the screen, adjus\
t a setting or adjust the

map scale.



•

Slide the controller (push upward/downward/leftward/rightward) to sele\
ct an item on the

screen, to adjust a setting or scroll the map in 8 directions.
07 Information (INFO) – Press to display the vehicle, traffic (if so equipped), weather \
(if so
equipped) or voice recognition information.
02
04
0910
05
03
06
1213
11
0708
01
1276473_14a_Q60_Convertible_QRG_062113.indd 196/21/13 3:32 PM

21
HomeLink® Universal Transceiver
The HomeLink® system can learn and consolidate the functions of up to 3 different
hand-held transmitters, operating items such as garage doors, property g\
ates, outdoor and
indoor lights or alarm systems.
To program the Homelink® Universal Transceiver:



•


Position the handheld transceiver 1-3 in (26-76 mm) away from the Home\
link® surface,
keeping the Homelink® indicator light in view.



•


Press and hold the desired Homelink® button and the handheld transmitter button
simultaneously until the Homelink® indicator light flashes slowly and then rapidly.



•


Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the Homelink® and observe the
indicator light:



•


A solid continuous light indicates the programing is complete and the Ho\
melink®
button will activate your device.



•


A blinking light that turns to a solid continuous light after 2 seconds \
indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete th\
e
programing process:



•

At the receiver of the device that you are programing to the Homelink®, press and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit).
y ou have
approximately 30 seconds to initiate the following step.



•


Press and hold the programmed Homelink® button for 2 seconds and release.
Repeat the previous 2 steps up to 3 times to complete the programming pr\
ocess.
Homelink® should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website at
www.homelink.com or call 1-800-355-3515.
HOMELINK®
1276473_14a_Q60_Convertible_QRG_062113.indd 216/21/13 3:32 PM