brake light INFINITI Q60 COUPE 2015 Quick Reference Guide
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2015, Model line: Q60 COUPE, Model: INFINITI Q60 COUPE 2015Pages: 28, PDF Size: 1.43 MB
Page 10 of 28

8
first drive features
Seat Belt Guide (Convertible models) 
  Unsnap the seat belt guide 1 to allow rear seat  
 
 
passengers easier access.
   Before fastening the seat belt, make sure the seat   
belt is inserted into the seat belt guide and the  
snaps are securely fastened.
   When using the seat belt guide, do not allow the   
seat belt to twist so that it will retract correctly.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)”\
 of your  
Owner’s Manual.
Automatic Drive Positioner (if so equipped) 
   Two positions for the driver’s seat, steering column and outside mirr\
ors can be stored in the  
automatic drive positioner memory.
   Follow this procedure to set the memory positions:
 
 
• 
  
Confirm the shift lever is in the 
 P (PARK) position 
(automatic transmission) or the parking brake is 
applied (manual transmission).
  • 
 
Push the ignition switch to the 
 ON position. 
 
 
• 
  
Adjust the driver’s seat, steering column and outside mirrors to the \
desired positions using  
the adjusting switches for each feature.
 
 
• 
  
Push the 
 SET switch and within 5 seconds, push the memory switch (1  or 2) for at least 1 second.
 
 
• 
  
The indicator light on the memory switch you select will illuminate for \
approximately 5 seconds.
  
 
 
• 
  
The driver’s seat, steering column and outside mirror positions are n\
ow set to your preference.
   These memorized positions can also be linked to your INFINITI Intelligen\
t Key. To link a  
memorized position to your INFINITI Intelligent Key, press the UNLOCK button on the key fob 
after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Passenger Rear Seat Entry/Exit 
   For ease in entering and exiting the rear passenger   
areas of the vehicle, perform the following steps:
 
 
1.
    
Release the front seat belt guide and seat belt 
  
(Convertible models).
 
 
2.
    
Pull the seatback lever 1 upward to fold the 
front seatback forward. Make sure that the front 
seatback is completely folded.
 
 
3.
   
To slide the front seat forward, firmly push 
  
the seatback button 
2. The front seat will  
move forward.Coupe
Convertible
1
12
21
1811810_15b_Q60_G_Coupe_Convert_QRG_091514.indd   89/15/14   1:26 PM  
Page 16 of 28

14
first drive features
Conventional (Fixed Speed) Cruise Control
   The cruise control system enables you to set a  
constant cruising speed once the vehicle has  
reached 25 MPH (40 km/h).
  The system will automatically maintain the set speed 
 
 
until you tap the brake pedal, accelerate, cancel or 
 
 
turn the system off. 
  To activate the cruise control, push the  ON/OFF 
  switch 1. The CRUISE indicator light in the 
 
 
instrument panel will illuminate.
   To set a cruising speed, accelerate the vehicle to the  desired speed, push the  
COAST/SET switch 
2 and release. The CRUISE SET indicator light  in the instrument panel 
will illuminate. Take your foot off the accelerator pedal. Your vehicle \
will maintain the  
set speed.
  To reset at a faster cruising speed, push and hold the  ACCEL/RES switch 3. When the  
 
 
vehicle attains the desired speed, release the switch.
  To reset at a slower cruising speed, push and hold the  COAST/SET switch 2. Release the  
 
 
switch when the vehicle slows to the desired speed.
  To cancel the preset speed, tap the brake pedal or push the  CANCEL switch 4.
  To turn off cruise control, push the ON/OFF switch 1. The CRUISE indicator light
 in the  
 
 
instrument panel will extinguish.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
USB (Universal Serial Bus) Connection Port/iPod® Interface
   The USB port 1 is located in the center console 
under the arm rest.
   When a compatible USB memory device or iPod®  
is plugged into the USB port, compatible audio  
and video files stored on the device can be 
played through the vehicle’s audio system and 
front display.
For more information, refer to the “Monitor, climate, audio, phone  
and voice recognition systems (section 4)” of your Owner’s Manual.1
1
2
34
1811810_15b_Q60_G_Coupe_Convert_QRG_091514.indd   149/15/14   1:26 PM  
Page 17 of 28

15
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE 
   To set Vehicle-To-Vehicle Distance Control mode, press  
the  ON/OFF  button 
1 for less than 1.5 seconds.   
The  CRUISE  indicator light 
2 will illuminate.
  Accelerate to the desired speed.
   Push down on the 
COAST/SET switch 3 and release  
it. Cruise control will be set to the desired speed.
   Press the distance button 4 repeatedly to change   
the set distance between long, middle and short.
   When a vehicle is not detected ahead of you in the   
lane, the set distance and set vehicle speed indicator   
lights will illuminate 
5 in set mode. 
   When a vehicle is detected ahead of you in the lane,   
the vehicle ahead detection, set distance and set   
vehicle speed indicator lights will illuminate 
6 in   
set mode. 
   To reset at a faster cruising speed, push up and hold the  ACCEL/RES  
switch 
7. When the vehicle attains the desired speed, release the switch.
   To reset at a slower cruising speed, push down and hold the  COAST/SET  
switch 
3. Release the switch when the vehicle slows to the desired speed.
     To cancel the preset speed, push the  CANCEL switch 8 or tap the brake pedal. The set 
vehicle speed indicator 
5 will extinguish.
   To turn off cruise control, press the  ON/OFF button 1. The CRUISE indicator light 2 in the 
instrument panel will extinguish.
To set conventional (fixed speed) cruise control mode:
   While cruise control is off, press the  ON/OFF
 button 1 and hold it down for more than 1.5 
seconds. The CRUISE  indicator light will illuminate.
  Accelerate to the desired speed.
   Push down on the 
COAST/SET switch and release it. The SET  indicator light will illuminate.  
Cruise control should be set to the desired speed.
To switch between the two cruise control modes:
   When one of the two cruise modes is in use, you must turn the system off\
, and then turn it   
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1
2
3
4
5
6
78
1811810_15b_Q60_G_Coupe_Convert_QRG_091514.indd   159/15/14   1:26 PM