height INFINITI Q60 COUPE 2015 Towing Guide
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2015, Model line: Q60 COUPE, Model: INFINITI Q60 COUPE 2015Pages: 25, PDF Size: 0.42 MB
Page 13 of 25

 2015 Infiniti Towing Guide  
 
 
12 The GCW you come up with must not exceed the Gross Combined Weight Rating (GCWR) for your 
vehicle. Refer to your vehicle owner’s manual to view the maximum GCWR specification listed for 
your vehicle.  
  
TRAILER TONGUE LOAD 
Trailer tongue load is the amount of 
trailer’s weight pressing down on the 
tow vehicle hitch ball.  
 
To measure trailer tongue load, place 
the tongue of the trailer on a scale 
when the trailer is not attached to the 
vehicle. A separate vehicle jack — not 
the trailer jack — should be used, as 
the location of the trailer jack is rearward of the trailer tongue and will not give you an accurate 
measurement of the true tongue load. Make sure the vehicle jack is placed directly under the trailer 
tongue coupler, and the tongue is set at the height/level of the tow vehicle hitch.  
 
For proper handling, you must keep the trailer tongue load between 10-15% of the actual trailer 
weight, within the limits of the maximum trailer tongue load allowable. For example, to determine 
the proper trailer tongue load for a 1,500-lb. trailer, multiply the weight of 1,500 lbs. by 10% to arrive 
at a figure of 150 lbs.  
 
Some trailer types may require different trailer tongue loads for safe towing. Always follow the 
trailer manufacturer’s recommendations for proper trailer set-up and trailer tongue load. Keep the 
trailer tongue load within the maximum trailer tongue load allowable. Additionally, make sure the 
vehicle has the payload capacity available for the trailer tongue load.   If the tongue load becomes 
excessive, rearrange cargo to allow for proper tongue load. 
 
Refer to your vehicle owner’s manual to view the maximum trailer tongue load listed for your 
vehicle.  
 
HITCH & TRAILER HEIGHT 
It is important that your trailer floor and 
tongue ride as level as possible. This  
will help prevent over-angling, bottoming-out, 
and improper tongue load and load transfer. 
Therefore, the hitch or trailer tongue must be 
adjusted during the initial vehicle/trailer fit-
up to ensure a level ride. Ball mounts and 
 
Trailer Tongue Load
Total Trailer Loadx   100  =  10-15%
Vehicle
Jack
Trailer Tongue Load
Total Trailer Load
   
  
Page 14 of 25

 2015 Infiniti Towing Guide  
 
 
13
weight distribution hitches are available in different configurations to adjust the tongue load and 
load transfer and hitch ball height. 
 
  WARNING - Towing can significantly alter the handling and performance characteristics of your 
vehicle. Moreover, it puts increased strain on the engine and drivetrain. Therefore, it is always a 
good idea to approach towing from the standpoint of safety — whether you are purchasing 
equipment or actually pulling the trailer.  
 
 WARNING- Always make sure your vehicle’s towing capacity is adequate for the trailer you 
intend to tow. Be certain that you have all of the proper equipment needed for safe towing, such  
as safety chains/cables, electric trailer brakes, electric trailer brake controller, breakaway switch, 
and extended rear view mirrors.  Make certain your equipment conforms to all federal, state or local 
regulations to help ensure against the possibility of a serious accident and personal injury or death. 
 
 
You should follow a more frequent maintenance schedule and check fluid levels, pressures, tire 
condition, etc., more often when on the road. See your vehicle owner’s manual for details. 
 
LOADING YOUR TRAILER 
 WARNING- Taking the time to load and balance your trailer properly will improve overall 
handling and minimize the strain on your tow vehicle. Incorrectly, loaded trailers tend to sway or 
swing from side to side, upsetting vehicle handling which could result in a serious accident, 
personal injury or death. Careful loading and balancing, and a weight distribution hitch and sway-
control device can help eliminate these problems. 
 
As mentioned earlier, conventional trailer tongue load must fall between 10-15% of the total trailer 
weight, or within the limits of the maximum trailer tongue load specified by the trailer 
manufacturer. 
 WARNING- Excessive trailer tongue load can actually push down the tow vehicle in back, lifting 
the front wheels to a point where traction, steering response, and braking may be severely reduced. 
which could result in an accident, personal injury or death. Too little trailer tongue load or negative 
load can lift the trailer tongue upwards on the trailer ball causing instability, which may lead to 
swaying, “tail wagging,” or jackknifing which could result in an accident, personal injury or death. 
 
With this in mind, proper loading is extremely 
important. When loading a trailer, 60% of the total 
cargo weight should be positioned in the front 
portion of the trailer and 40% in the back. Then the 
load should be adjusted until the proper tongue load 
ratio is achieved.  
60%40%
TOWING SAFETY